Botulinum Toxins
Effectively improve wrinkles and address specific concerns with our Botulinum Toxin Type A products. These solutions are used for muscle relaxation, jawline slimming, and treating conditions like hyperhidrosis.
17 products
17 products
Sort by:
NABOTA 200 Units (1 Vial)
$57.00
Unit price perNABOTA 200 Units (1 Vial)
$57.00
Unit price perProduct Overview
NABOTA Botulinum Toxin Type A
- 200 units per vial for comprehensive treatments
- Manufactured by Daewoong Pharmaceutical Co., Ltd.
- Hi-PURE™ technology for reduced impurities
- Suitable for both cosmetic and medical applications
Key Ingredients & Composition
- Clostridium Botulinum Toxin Type A
- 200 Units The active ingredient responsible for muscle relaxation and wrinkle reduction
- Human Serum Albumin
- Stabilizer Acts as a stabilizing agent to maintain product integrity
- Sodium Chloride
- Buffer Provides isotonic conditions for safe injection
Hi-PURE™ Technology
Treatment Applications & Effects
Cosmetic Applications
Medical Indications
Dosage Guidelines by Treatment Area
| Treatment Area | Recommended Units | Injection Points |
|---|---|---|
| Glabellar Lines | 20 units total | 5 injection points |
| Crow's Feet | 12-24 units per side | Multiple points |
| Masseter Muscles | 50-60 units per side | 2-3 injection points |
| Upper Limb Spasticity | 15-200 units per muscle | Up to 360 units total |
| Large Muscle Areas | Variable dosing | Trapezius, calves |
Reconstitution Protocol
Storage & Handling
Proper Storage Conditions
Safety Information & Precautions
Important Safety Warnings
- Do not use on pregnant or nursing mothers
- Contraindicated for individuals with botulinum toxin hypersensitivity
- Single-dose use only - discard unused portion
- Requires neurologist or rehabilitation physician administration
Professional Administration Required
Contraindications
Frequently Asked Questions
- What is NABOTA 200U used for?
- It is used for cosmetic treatment of moderate to severe glabellar lines, forehead wrinkles, crow's feet, and jawline slimming via masseter muscle treatment. It is also FDA-approved for post-stroke upper limb spasticity, cervical dystonia, benign essential blepharospasm, and hyperhidrosis of the palms and feet.
- How fast does it work and how long does it last?
- Onset of effects occurs within a few days, with maximum effect reached in 1-2 weeks. The duration of effect is approximately 3-6 months.
- What is the reconstitution protocol for NABOTA 200U?
- Use sterile, preservative-free 0.9% Sodium Chloride Injection, slowly injecting the diluent against the vial wall to avoid foaming. The reconstitution volume varies by treatment area and professional preference. After reconstitution, use within 24 hours.
- Who manufactures NABOTA?
- NABOTA is manufactured by Daewoong Pharmaceutical Co., Ltd. using its patented Hi-PURE™ purification technology.
- Who should administer NABOTA?
- It should only be administered by qualified medical professionals trained in botulinum toxin injection techniques, specifically neurologists or rehabilitation physicians. It is contraindicated for individuals with botulinum toxin hypersensitivity and should not be used during pregnancy or nursing.
BOTULAX 200 Units (1 Vial)
$67.00
Unit price perBOTULAX 200 Units (1 Vial)
$67.00
Unit price perBOTULAX
200 Units (1 Vial)
🧩 Essential Information
Product Name: BOTULAX 200unit (1 Vial)
BOTULAX 200U is a premium botulinum toxin type A formulation from Hugel Inc. This versatile volume is ideal for both facial cosmetic procedures and body treatments, providing enough units for comprehensive treatment sessions while maintaining optimal potency control.
Manufacturer: Hugel Inc.
Packaging: 1 vial per box, containing 200 units of lyophilized powder.
📊 Volume Comparison Guide
| Volume | Main Use | Risk of Resistance | Duration | Treatment Area |
|---|---|---|---|---|
| 100U | Facial cosmetic procedures | Low | 3-4 months | Glabella, crow's feet, forehead |
| 200U | Combined facial and body treatments | Medium | 3-5 months | Jawline, trapezius, calves |
| 300U | High-volume body treatments | High | Up to 6 months | Calves, trapezius, large muscles |
Which Product is Right for Me?
Choose your product by considering the number of units required for your specific treatment area and purpose. For example, a 100U product is often sufficient for face-centric treatments, while a 200U or 300U product is more suitable for combined facial and body treatments or for larger muscle groups.
🧬 Key Ingredients and Basic Information
💡 Efficacy and Expected Effects
Primary Cosmetic Applications
Provides temporary improvement of moderate to severe glabellar lines (frown lines). Can also be used for other cosmetic and therapeutic applications, such as crow's feet, and forehead lines. It works by blocking nerve signals to muscles, causing them to relax and smooth out wrinkles.
Body Contouring Applications
Ideal for combined facial and body treatments including masseter muscle reduction, trapezius muscle relaxation, and calf muscle contouring procedures.
- Masseter muscle hypertrophy (jawline)
- Trapezius muscle relaxation
- Calf muscle reduction
Medical Applications
Effective treatment for blepharospasm (involuntary blinking) and muscle spasticity.
🧪 Usage Protocol (Treatment Guide)
Recommended Dilution
Reconstitute with a sterile, preservative-free 0.9% Sodium Chloride Injection. The amount of diluent can be adjusted based on the desired concentration for the treatment area. A common dilution for 200U is 4mL for a concentration of 5U per 0.1mL.
| Diluent Volume | Concentration (Units/0.1mL) |
|---|---|
| 2.0 mL | 10 Units |
| 4.0 mL | 5 Units |
| 8.0 mL | 2.5 Units |
📦 Precautions and Storage
- Unopened vials must be stored in a refrigerator at 2-8°C, protected from light.
- Do not shake the vial or allow the product to freeze.
- Use reconstituted product immediately for optimal potency.
- If necessary, it can be stored in the refrigerator (2-8°C) and used within 24 hours. Discard any unused solution after this period.
- Do not administer to individuals with known hypersensitivity to botulinum toxin or its components.
- Patients with neuromuscular disorders should be treated with caution.
- Avoid lying down, massaging the injection area, or engaging in strenuous activity for the first few hours post-treatment.
✅ Quality Assurance & Manufacturing
📋 Detailed Specifications
| Specification | Details | Notes |
|---|---|---|
| Active Ingredient | Clostridium Botulinum Toxin Type A (CBFC26 strain) | - |
| Content per Vial | 200 Units | Versatile professional grade |
| Excipients | Human Serum Albumin, Sodium Chloride | Pharmaceutical grade stabilizers |
| Storage Requirements | 2-8°C, Protected from light | Must not be frozen |
| Onset of Action | 2-3 days initial, 1-2 weeks full effect | Individual variation may occur |
| Recommended Dilution | 0.9% sterile saline solution | Follow clinical reconstitution guide |
❓ Frequently Asked Questions
NABOTA 100 Units (1 Vial)
$43.00
Unit price perNABOTA 100 Units (1 Vial)
$43.00
Unit price perWhy KSTATION
Product Overview
High-Purity Botulinum Toxin Type A
- 100 units per vial for precise dosing
- Hi-PURE™ technology for reduced immunogenicity
- Lyophilized powder for extended stability
- Single-dose vial for optimal safety
Composition & Ingredients
- Active Ingredient
- 100 Units Clostridium Botulinum Toxin Type A - Highly purified neurotoxin complex
- Formulation
- Lyophilized Sterile, white to off-white powder for injection requiring reconstitution
- Reconstitution
- 0.9% NaCl Sterile, preservative-free Sodium Chloride Injection USP
Hi-PURE™ Technology Advantage
Clinical Applications & Effects
- Glabellar lines and forehead wrinkles improvement
- Crow's feet and perioral line reduction
- Masseter muscle hypertrophy treatment (jawline slimming)
- Medical applications: spasticity, dystonia, hyperhidrosis
Usage Protocol & Administration
Cosmetic Treatment Dosages
Crow's Feet: 12-24 units per side
Masseter Muscles: 50-60 units per side
Product Specifications
| Specification | Value | Details |
|---|---|---|
| Content | 100 Units | Per vial, lyophilized powder |
| Storage | 2-8°C | Refrigerated, do not freeze |
| Shelf Life | 36 Months | Unopened, stored properly |
| Usage After Reconstitution | 24 Hours | Store at 2-8°C after mixing |
| Package | Single Vial | Disposable after single use |
Storage & Handling Requirements
Safety Information & Precautions
Important Safety Information
- Not for use in pregnant or nursing women
- Contraindicated in patients with myasthenia gravis
- Avoid use with aminoglycoside antibiotics
- Monitor for signs of botulism or distant spread
Contraindications
Emergency Response
Manufacturer Information
Daewoong Pharmaceutical Co., Ltd.
Good Manufacturing Practice
Certified pharmaceutical manufacturing standards
International Standards
Compliant with international quality management
Proprietary Technology
Advanced purification for reduced immunogenicity
Frequently Asked Questions
- What is NABOTA used for?
- NABOTA is used cosmetically for glabellar lines and forehead wrinkles improvement, crow's feet and perioral line reduction, and masseter muscle hypertrophy treatment (jawline slimming). Medical applications include spasticity, dystonia, and hyperhidrosis.
- How soon does NABOTA work and how long do results last?
- Initial effect onset is typically within 2-3 days, with peak results reached in 1-2 weeks. The duration of effect is typically 3-6 months.
- What is the standard dilution for NABOTA?
- NABOTA is a lyophilized powder requiring reconstitution with sterile, preservative-free 0.9% Sodium Chloride Injection (USP). Inject the diluent slowly against the vial wall to prevent foaming, gently swirl to dissolve, and use within 24 hours of reconstitution.
- Who should administer NABOTA?
- NABOTA should only be administered by qualified medical professionals with appropriate training in botulinum toxin injection techniques. It is contraindicated in cases of hypersensitivity to botulinum toxin or any component, infection at the injection site, myasthenia gravis, Lambert-Eaton syndrome, or other neuromuscular disorders, and is not for use in pregnant or nursing women.
- Who manufactures NABOTA?
- NABOTA is manufactured by Daewoong Pharmaceutical Co., Ltd., a leading Korean pharmaceutical company, using proprietary Hi-PURE™ technology for enhanced product quality and safety.
BOTULAX 100 Units (1 Vial)
$58.80
Unit price perBOTULAX 100 Units (1 Vial)
$58.80
Unit price perBOTULAX
100 Units (1 Vial)
🧩 Essential Information
Product Name: BOTULAX 100unit (1 Vial)
BOTULAX 100U is a professional botulinum toxin type A formulation from Hugel Inc. It is supplied as a lyophilized powder in a single vial containing 100 units. The product is designed for facial cosmetic applications and treating specific medical conditions like blepharospasm.
Manufacturer: Hugel Inc.
Packaging: 1 vial per box, containing 100 units of lyophilized powder.
📋 Volume Comparison Guide
| Volume | Main Use | Risk of Resistance | Duration | Treatment Area |
|---|---|---|---|---|
| 100U | Facial cosmetic procedures | Low | 3-4 months | Glabella, crow's feet, forehead |
| 200U | Combined facial and body treatments | Medium | 3-5 months | Jawline, trapezius, calves |
| 300U | High-volume body treatments | High | Up to 6 months | Calves, trapezius, large muscles |
Which Product is Right for Me?
Choose your product by considering the number of units required for your specific treatment area and purpose. For face-centric treatments, a 100U product is often sufficient, while a 200U or 300U product is more suitable for combined facial and body treatments or for larger muscle groups.
🔬 Mechanism of Action & Efficacy
Efficacy and Expected Effects
BOTULAX 100U is effective for the temporary improvement of moderate to severe glabellar lines (frown lines) in adults. It is also used for treating benign essential blepharospasm and helps to smooth dynamic wrinkles like crow's feet and forehead lines.
Neuromuscular Junction Blocking
The botulinum toxin type A blocks nerve signals to the targeted muscles, preventing them from contracting. This results in temporary muscle paralysis, which in turn relaxes and smooths the overlying skin.
🧬 Ingredients & Composition
🧪 Usage Protocol & Dilution Guide
Recommended Dilution
Reconstitution with sterile, preservative-free 0.9% Sodium Chloride Injection is standard. A common dilution for 100U is 2.5 mL, resulting in a concentration of 4 units per 0.1mL.
| Diluent Volume (0.9% Saline) | Resulting Dose (Units/0.1mL) |
|---|---|
| 0.5 mL | 20 Units |
| 1.0 mL | 10 Units |
| 2.0 mL | 5 Units |
| 4.0 mL | 2.5 Units |
| 8.0 mL | 1.25 Units |
⏱️ Results Timeline
💡 Detailed Description of BOTULAX 100unit
Usage
This is the standard volume for cosmetic procedures focusing on smaller, more delicate areas of the face. It is highly effective for reducing the appearance of fine lines and wrinkles.
Usage Tips
- Always use aseptic technique for reconstitution and injection.
- Inject the diluent gently into the vial to avoid foaming, which can denature the protein.
- The reconstituted solution should be clear and colorless.
- A fine-gauge needle (e.g., 30G) is recommended for precise injections and patient comfort.
Additional Information
The high-purity formula and tight potency control (91-115 units/vial) ensure a predictable and consistent outcome. The large and homogeneous size of the toxin complex helps to minimize its spread outside the injection site.
👨⚕️ Professional Usage Guidelines
Professional Use
This product is intended for use by trained medical professionals who are knowledgeable in facial anatomy and injection techniques.
Patient Assessment
Do not administer to patients with a known hypersensitivity to any component of the formulation. It is not recommended for patients with neuromuscular disorders.
✅ Quality Assurance & Manufacturing
Hugel Inc. Manufacturing Excellence
Manufactured by Hugel Inc., a leading pharmaceutical company with extensive experience in aesthetic and therapeutic products. The company maintains strict quality control standards and operates under international pharmaceutical manufacturing guidelines.
Precise Potency Control
Each vial undergoes rigorous testing to ensure consistent unit potency and purity. The high-purity formula and tight potency control (91-115 units/vial tolerance) ensure predictable and consistent outcomes.
Controlled Environment Production
Produced in controlled pharmaceutical environments meeting international standards for sterility, purity, and molecular consistency. Each batch is traceable and meets stringent quality specifications.
📦 Storage & Handling Requirements
- Unopened vials must be stored in a refrigerator at 2-8°C.
- Do not shake or freeze the vial, as this can destroy the protein structure.
- For best results, use the reconstituted product immediately.
- It may be stored in a refrigerator (2-8°C) for up to 24 hours. Any unused portion must be discarded after this time.
- Contraindicated in patients with neuromuscular disorders.
- Not recommended for pregnant or breastfeeding women.
- Do not administer to patients with known hypersensitivity to any component.
📋 Detailed Specifications
| Specification | Details | Notes |
|---|---|---|
| Active Ingredient | Clostridium Botulinum Toxin Type A (CBFC26 strain) | High molecular weight complex form |
| Content per Vial | 100 Units | Standard volume professional grade |
| Excipients | Human Serum Albumin, Sodium Chloride | Pharmaceutical grade stabilizers |
| Storage Requirements | 2-8°C, Protected from light | Must not be frozen |
| Onset of Action | 2-3 days initial, 1-2 weeks full effect | Individual variation may occur |
| Recommended Dilution | 0.9% sterile saline solution | Common dilution is 2.5 mL |
❓ Frequently Asked Questions
What is BOTULAX 100U used for?
BOTULAX 100U is used for the temporary improvement of moderate to severe facial wrinkles, including glabellar (frown) lines, crow's feet, and forehead lines. It is also indicated for benign essential blepharospasm.
How soon does BOTULAX work and how long do results last?
Initial effects are typically seen within 2-3 days, with the full effect manifesting within 1-2 weeks. Results generally last 3-6 months, varying by patient and treatment area.
What is the standard dilution for BOTULAX 100U?
A common reconstitution uses 2.5 mL of preservative-free 0.9% sodium chloride injection, giving a concentration of 4 units per 0.1 mL. Dilution can be adjusted to the treatment plan.
Who manufactures BOTULAX?
BOTULAX is manufactured by Hugel Inc., a leading Korean pharmaceutical company. Each vial is held to a tight potency tolerance of 91-115 units for consistent, predictable results.
Who should administer BOTULAX 100U?
BOTULAX is intended for administration by trained medical professionals knowledgeable in facial anatomy and injection technique. It is contraindicated in patients with neuromuscular disorders, known hypersensitivity to any component, and is not recommended during pregnancy or breastfeeding.
BOTULAX 300 Units (1 Vial)
$72.20
Unit price perBOTULAX 300 Units (1 Vial)
$72.20
Unit price perBOTULAX
200 Units (1 Vial)
🧩 Essential Information
Product Name: BOTULAX 200unit (1 Vial)
BOTULAX 200U is a premium botulinum toxin type A formulation from Hugel Inc. This versatile volume is ideal for both facial cosmetic procedures and body treatments, providing enough units for comprehensive treatment sessions while maintaining optimal potency control.
Manufacturer: Hugel Inc.
Packaging: 1 vial per box, containing 200 units of lyophilized powder.
📊 Volume Comparison Guide
| Volume | Main Use | Risk of Resistance | Duration | Treatment Area |
|---|---|---|---|---|
| 100U | Facial cosmetic procedures | Low | 3-4 months | Glabella, crow's feet, forehead |
| 200U | Combined facial and body treatments | Medium | 3-5 months | Jawline, trapezius, calves |
| 300U | High-volume body treatments | High | Up to 6 months | Calves, trapezius, large muscles |
Which Product is Right for Me?
Choose your product by considering the number of units required for your specific treatment area and purpose. For example, a 100U product is often sufficient for face-centric treatments, while a 200U or 300U product is more suitable for combined facial and body treatments or for larger muscle groups.
🧬 Key Ingredients and Basic Information
💡 Efficacy and Expected Effects
Primary Cosmetic Applications
Provides temporary improvement of moderate to severe glabellar lines (frown lines). Can also be used for other cosmetic and therapeutic applications, such as crow's feet, and forehead lines. It works by blocking nerve signals to muscles, causing them to relax and smooth out wrinkles.
Body Contouring Applications
Ideal for combined facial and body treatments including masseter muscle reduction, trapezius muscle relaxation, and calf muscle contouring procedures.
- Masseter muscle hypertrophy (jawline)
- Trapezius muscle relaxation
- Calf muscle reduction
Medical Applications
Effective treatment for blepharospasm (involuntary blinking) and muscle spasticity.
🧪 Usage Protocol (Treatment Guide)
Recommended Dilution
Reconstitute with a sterile, preservative-free 0.9% Sodium Chloride Injection. The amount of diluent can be adjusted based on the desired concentration for the treatment area. A common dilution for 200U is 4mL for a concentration of 5U per 0.1mL.
| Diluent Volume | Concentration (Units/0.1mL) |
|---|---|
| 2.0 mL | 10 Units |
| 4.0 mL | 5 Units |
| 8.0 mL | 2.5 Units |
📦 Precautions and Storage
- Unopened vials must be stored in a refrigerator at 2-8°C, protected from light.
- Do not shake the vial or allow the product to freeze.
- Use reconstituted product immediately for optimal potency.
- If necessary, it can be stored in the refrigerator (2-8°C) and used within 24 hours. Discard any unused solution after this period.
- Do not administer to individuals with known hypersensitivity to botulinum toxin or its components.
- Patients with neuromuscular disorders should be treated with caution.
- Avoid lying down, massaging the injection area, or engaging in strenuous activity for the first few hours post-treatment.
✅ Quality Assurance & Manufacturing
📋 Detailed Specifications
| Specification | Details | Notes |
|---|---|---|
| Active Ingredient | Clostridium Botulinum Toxin Type A (CBFC26 strain) | - |
| Content per Vial | 200 Units | Versatile professional grade |
| Excipients | Human Serum Albumin, Sodium Chloride | Pharmaceutical grade stabilizers |
| Storage Requirements | 2-8°C, Protected from light | Must not be frozen |
| Onset of Action | 2-3 days initial, 1-2 weeks full effect | Individual variation may occur |
| Recommended Dilution | 0.9% sterile saline solution | Follow clinical reconstitution guide |
❓ Frequently Asked Questions
CORETOX 100 Units (1 Vial)
$52.00
Unit price perCORETOX 100 Units (1 Vial)
$52.00
Unit price perCORETOX
100 Units (1 Vial)
Why KSTATION
Active Ingredient Analysis
- Clostridium Botulinum Toxin Type A (Hall Strain)
-
100 Units per VialHigh-purity botulinum toxin derived from the Hall strain, providing consistent potency and predictable results. This protein-free formulation reduces the risk of immune resistance while maintaining optimal efficacy for both aesthetic and therapeutic applications.
- Lyophilized Powder Form
-
Sterile Freeze-DriedAdvanced lyophilization process ensures product stability and extended shelf life while maintaining the integrity of the active ingredient. Reconstitution with sterile saline creates a clear, colorless solution ready for injection.
- Non-Animal Derived Formula
-
Protein-FreeManufactured without animal-derived proteins, significantly reducing the risk of allergic reactions and immune system interference, making it suitable for repeated treatments.
Key Product Advantages
Dynamic Wrinkle Reduction
Facial Contouring Enhancement
Therapeutic Applications
Reduced Resistance Risk
- Visible results typically begin within 2-7 days after injection
- Effects generally last between 4 to 6 months with proper application
- Suitable for both aesthetic enhancement and therapeutic treatment
- Compatible with existing treatment protocols and procedures
Professional Usage Protocol
Preparation & Reconstitution
Dosage Determination
Injection Technique
Post-Treatment Care
Product Specifications
| Specification | Details | Requirements |
|---|---|---|
| Active Ingredient | Clostridium Botulinum Toxin Type A | Hall Strain, 100 Units |
| Physical Form | Lyophilized White Powder | Sterile, Freeze-Dried |
| Storage Temperature | 2-8°C Refrigerated | Unopened Vial |
| Reconstitution | 0.9% Sodium Chloride | Sterile, Non-Preserved |
| Solution Appearance | Colorless, Transparent | After Reconstitution |
| Usage Time | Immediate Use Recommended | Post-Reconstitution |
Important Safety Information
Professional Use Only: This product must be administered by qualified medical professionals only.
Contraindications: Do not use on pregnant or breastfeeding individuals, or those with known hypersensitivity to botulinum toxin products.
Storage Requirements: Store unopened vials in refrigerator at 2-8°C. Use reconstituted solution immediately.
Post-Treatment Care: Patients should avoid massaging treated areas and strenuous exercise for 24 hours following injection.
Primary Treatment Areas
Glabella (Frown Lines)
Forehead Lines
Crow's Feet
Masseter Muscles
Therapeutic Treatment Options
- Hyperhidrosis Treatment: Effective management of excessive sweating in palms, underarms, and feet through targeted sweat gland intervention
- Bruxism Management: Reduction of teeth grinding and jaw clenching by relaxing overactive jaw muscles
- Muscle Spasticity: Treatment of localized muscle contractions and spasms for improved comfort and function
- Migraine Prevention: Potential therapeutic benefit for chronic migraine sufferers when administered by qualified professionals
Expected Treatment Outcomes
Days: Onset of Effects
Weeks: Peak Results
Months: Duration
Manufacturing Excellence
Medytox Inc. Manufacturing
Hall Strain Consistency
Advanced Lyophilization
Sterile Production
Frequently Asked Questions
- What is CORETOX 100 Units used for?
- CORETOX 100 Units is used for dynamic wrinkle reduction of frown lines, forehead lines, and crow's feet, facial contouring including jawline slimming through masseter muscle treatment, and therapeutic applications such as hyperhidrosis (excessive sweating) and bruxism (teeth grinding).
- When does it take effect and how long does it last?
- Visible results typically begin within 2-7 days after injection, with peak results in 2-4 weeks. Effects generally last between 4 to 6 months with proper application.
- How is CORETOX 100 Units reconstituted?
- Reconstitute with sterile, non-preserved saline (0.9% Sodium Chloride). Gently swirl the vial to dissolve the powder, avoiding vigorous shaking. Use the reconstituted solution immediately.
- Who should administer CORETOX 100 Units?
- CORETOX 100 Units must be administered by qualified medical professionals only, via precise intramuscular injections using proper aseptic techniques.
- Who manufactures CORETOX 100 Units?
- CORETOX 100 Units is manufactured by Medytox Inc.
METOX 100 Units (1 Vial)
$37.00
Unit price perMETOX 100 Units (1 Vial)
$37.00
Unit price per
Clostridium Botulinum Toxin Type A
Why KSTATION
Product Overview
Advanced Botulinum Toxin Formula
- Improvement of frown lines, crow's feet, and forehead wrinkles
- Treatment for hyperhidrosis (excessive sweating)
- Enhancement of lip contouring and neck wrinkle reduction
- Professional-grade formula with minimized resistance risk
Ingredients & Composition
- Clostridium Botulinum Toxin Type A
- 100 Units Primary active ingredient for muscle relaxation and wrinkle reduction
- Human Serum Albumin
- Stabilizer Protein stabilizer to maintain toxin integrity during storage
- Sodium Chloride
- Excipient Maintains osmotic balance and ensures safe injection
Vacuum Dehydration Technology
Treatment Effects & Benefits
- Relaxation of moderate to severe facial lines caused by muscle contractions
- Significant improvement in glabellar wrinkles with quick, noticeable results
- Extended duration of aesthetic effects for patient satisfaction
- Proven efficacy in clinical studies with outstanding cosmetic outcomes
Long-term Treatment Value
Usage Protocol & Administration
Recommended Dosage Guidelines
Storage & Handling Specifications
| Storage Condition | Temperature | Duration |
|---|---|---|
| Unopened Vial | 2-8°C (Refrigerated) | Until Expiration Date |
| Reconstituted Solution | 2-8°C (Refrigerated) | Within 24 Hours |
| Room Temperature | Not Recommended | Avoid |
Professional Use Requirements
Safety Precautions & Warnings
Important Safety Information
- Do not use on pregnant or breastfeeding individuals
- Avoid use in patients with known hypersensitivity to ingredients
- Minimum 3-month interval between treatments required
- Discard any unused portion after 24 hours of reconstitution
Contraindications
Professional Administration Only
Frequently Asked Questions
- What is METOX 100U used for?
- METOX 100U is used to improve frown lines, crow's feet, and forehead wrinkles. It is also applied for hyperhidrosis (excessive sweating), lip contouring, and neck wrinkle reduction.
- How soon does METOX 100U work and how long do results last?
- Onset of effect is typically seen within 3-7 days, with maximum effect at 1-2 weeks. Results generally last 6-9 months, varying by patient and treatment area.
- What is the standard dilution for METOX 100U?
- Reconstitute with 2.5 mL of sterile, preservative-free 0.9% normal saline to achieve a concentration of 4 units per 0.1 mL.
- Who should administer METOX 100U?
- METOX must be administered by certified medical professionals trained in injection technique and facial anatomy. It is contraindicated in pregnancy or breastfeeding, neuromuscular disorders, active skin infection at the injection site, and known hypersensitivity to botulinum toxin.
WONDERTOX 200 Units (1 Vial)
$49.00
Unit price perWONDERTOX 200 Units (1 Vial)
$49.00
Unit price perWONDERTOX
200 Units / 1 Vial
Why KSTATION
Product Overview
WONDERTOX Inj. 200 units is a premium botulinum toxin type A injection designed for comprehensive aesthetic and therapeutic treatments. This higher-volume formulation enables treatment of multiple areas in a single session, making it ideal for extensive facial treatments and body contouring applications.
Key Components
Key Benefits & Applications
Long-lasting results with average duration of 3-6 months depending on treatment area and individual metabolism
Administration Protocol
Product Specifications
| Specification | Value | Notes |
|---|---|---|
| Product Volume | 200 units / 1 vial | Lyophilized powder form |
| Storage Temperature | 2-8°C | Refrigerated storage required |
| Reconstitution Volume | 5.0 mL sterile saline | 0.9% preservative-free |
| Final Concentration | 4U/0.1 mL | After proper dilution |
| Shelf Life After Reconstitution | Use immediately / Max 24 hours | Store at 2-8°C, do not freeze |
| Manufacturer | Huons BioPharma Co., Ltd. | One vial per box packaging |
Storage & Handling Requirements
- Store unopened vials in refrigerator at 2-8°C
- Use reconstituted solution immediately or within 24 hours maximum
- Do not freeze reconstituted product
- One vial should be used for one patient only
- Do not use if packaging is damaged or product appears discolored
Safety Information & Precautions
Important Precautions
- Must be administered by qualified medical professionals only
- Proper patient assessment and medical history review required
- Use aseptic technique during reconstitution and injection
- Monitor for allergic reactions or adverse responses
- Ensure proper dosage calculation based on treatment area
- One vial per patient policy must be strictly followed
Quality Control
- Inspect vial for damage or discoloration before use
- Verify expiration date and storage conditions
- Check reconstituted solution for clarity and particle-free appearance
- Maintain cold chain throughout handling and storage
Technical Advantages
The 200-unit formulation of WONDERTOX is specifically designed for comprehensive treatment plans that require higher unit volumes. This version allows for efficient treatment of multiple areas in a single session, making it particularly suitable for:
Frequently Asked Questions
METOX 200 Units (1 Vial)
$58.00
Unit price perMETOX 200 Units (1 Vial)
$58.00
Unit price per
Clostridium Botulinum Toxin Type A
Why KSTATION
Product Overview
Advanced Botulinum Toxin Formula
- Improvement of frown lines, crow's feet, and forehead wrinkles
- Treatment for hyperhidrosis (excessive sweating)
- Enhancement of lip contouring and neck wrinkle reduction
- Professional-grade formula with minimized resistance risk
Ingredients & Composition
- Clostridium Botulinum Toxin Type A
- 200 Units Primary active ingredient for muscle relaxation and wrinkle reduction
- Human Serum Albumin
- Stabilizer Protein stabilizer to maintain toxin integrity during storage
- Sodium Chloride
- Excipient Maintains osmotic balance and ensures safe injection
Vacuum Dehydration Technology
Treatment Effects & Benefits
- Temporarily relaxes specific facial muscles to smooth dynamic wrinkles and improve facial symmetry
- Precision Delivery : Engineered for accurate, targeted administration
- Long-Lasting Effects : Provides smooth, natural-looking results that endure
- Clinically Proven : Backed by scientific research and extensive clinical trials
Long-term Treatment Value
Usage Protocol & Administration
Recommended Dosage Guidelines
Storage & Handling Specifications
| Storage Condition | Temperature | Duration |
|---|---|---|
| Unopened Vial | 2-8°C (Refrigerated) | Until Expiration Date |
| Reconstituted Solution | 2-8°C (Refrigerated) | Within 24 Hours |
| Room Temperature | Not Recommended | Avoid |
Professional Use Requirements
Safety Precautions & Warnings
Important Safety Information
- Do not use on pregnant or breastfeeding individuals
- Avoid use in patients with known hypersensitivity to ingredients
- Minimum 3-month interval between treatments required
- Discard any unused portion after 24 hours of reconstitution
Contraindications
Professional Administration Only
Frequently Asked Questions
- What is METOX 200U used for?
- METOX 200U is used to improve frown lines, crow's feet, and forehead wrinkles. Its higher unit count also supports hyperhidrosis (excessive sweating), lip contouring, and neck wrinkle reduction, as well as larger treatment areas.
- How soon does METOX 200U work and how long do results last?
- Onset of effect is typically seen within 3-7 days, with maximum effect at 1-2 weeks. Results generally last 6-9 months, varying by patient and treatment area.
- What is the standard dilution for METOX 200U?
- Reconstitute with 5 mL of sterile, preservative-free 0.9% normal saline to achieve a concentration of 4 units per 0.1 mL — the same concentration as a 2.5 mL dilution of a 100-unit vial.
- Who should administer METOX 200U?
- METOX must be administered by certified medical professionals trained in injection technique and facial anatomy. It is contraindicated in pregnancy or breastfeeding, neuromuscular disorders, active skin infection at the injection site, and known hypersensitivity to botulinum toxin.
INNOTOX 100 Units (1 Vial)
$46.00
Unit price perINNOTOX 100 Units (1 Vial)
$46.00
Unit price perINNOTOX
100 Units per Vial
Why KSTATION
Product Overview
Advanced Liquid Botulinum Toxin
- Ready-to-use liquid formulation - no reconstitution required
- Albumin, gelatin, and animal protein-free composition
- Low diffusion rate for precise application
- Quick onset of action within 2-3 days
Key Ingredients & Composition
- Clostridium Botulinum Toxin Type A
- Hall Strain The primary active ingredient derived from Hall strain, ensuring consistent and reliable muscle relaxation effects for both cosmetic and therapeutic applications.
- L-Methionine
- Stabilizer Essential amino acid that serves as a stabilizing agent, maintaining the integrity and potency of the botulinum toxin in liquid form.
- Polysorbate 20
- Surfactant Non-ionic surfactant that enhances the stability and prevents aggregation of the active ingredient in the liquid formulation.
- Buffered Saline pH 7.0
- pH Buffer Maintains optimal pH level for maximum stability and bioavailability, ensuring consistent performance across different storage conditions.
Albumin-Free Advantage
Treatment Benefits & Results
- Effective for moderate to severe glabellar wrinkles and crow's feet
- Excellent results for forehead lines and perioral lines
- Proven efficacy for treating blepharospasm
- Highly effective for hyperhidrosis (excessive sweating) treatment
Long-Term Treatment Value
Application Guidelines
Dosage Guidelines by Treatment Area
Crow's Feet: 15-20 units per side
Forehead Lines: 15-25 units across treatment area
Axillary Hyperhidrosis: Up to 50 units per armpit
Comprehensive Facial Treatment: 100U vial ideal for multiple areas
Professional Administration Only
Storage & Handling Specifications
| Specification | Requirement | Details |
|---|---|---|
| Storage Temperature | 2-8°C | Refrigerated storage required |
| Shelf Life (Unopened) | 36 months | From manufacturing date |
| Usage After Opening | 4 weeks | Must remain refrigerated |
| Formulation Type | Liquid | Ready-to-use, no reconstitution |
| Volume per Vial | 100 Units | Single vial packaging |
Optimal Storage Conditions
Safety Information & Precautions
- Avoid rubbing or applying pressure to treated areas for 24 hours
- Remain upright for 4 hours following treatment
- Avoid strenuous exercise for several days post-treatment
- Discontinue alcohol and blood-thinning medications as advised
Potential Side Effects
Rare but serious: Allergic reactions including itching, hives, or swelling of face and throat. Seek immediate medical attention if severe reactions occur.
Contraindications
Clinical Applications
Comprehensive Treatment Capability
Product Advantages
Ready-to-Use Innovation
Enhanced Safety Profile
Precision Application
Extended Shelf Life
Professional Specifications
| Parameter | Specification | Clinical Relevance |
|---|---|---|
| Active Ingredient | Botulinum Toxin Type A | Hall strain for consistency |
| Formulation | Liquid (Ready-to-Use) | No reconstitution required |
| Protein Content | Albumin-free | Reduced allergic risk |
| Diffusion Rate | Low | Precise application control |
| pH Level | 7.0 (Buffered) | Optimal stability |
Quality Assurance
Frequently Asked Questions
- What is INNOTOX used for?
- INNOTOX is used for moderate to severe glabellar wrinkles, crow's feet, forehead lines, and perioral lines, as well as blepharospasm and hyperhidrosis (excessive sweating).
- How soon does INNOTOX work and how long do results last?
- Onset of action is typically within 2-3 days, with full effect achieved in 7-14 days. Results typically maintain for 3-8 months, with some patients experiencing benefits up to 10 months depending on individual metabolism, dosage, and treatment area.
- Does INNOTOX require reconstitution?
- No. INNOTOX is a ready-to-use, albumin-free liquid botulinum toxin formulation that requires no reconstitution, allowing it to be drawn directly from the vial for immediate use.
- Who should administer INNOTOX?
- INNOTOX is strictly for professional use and must be administered by qualified medical professionals trained in botulinum toxin injection techniques and facial anatomy. It is contraindicated in patients with known hypersensitivity to botulinum toxin or any component, and should be avoided during pregnancy, breastfeeding, or in patients with neuromuscular disorders.
- Who manufactures INNOTOX?
- INNOTOX is manufactured by Medytox Inc. under strict quality control standards, with each batch tested for potency, purity, and safety.
Kamomis 100 Units (1 Vial)
$30.00
Unit price perKamomis 100 Units (1 Vial)
$30.00
Unit price perAdvanced Cosmetic Injectable
Kamomis
100 Units / 1 Vial
Professional-grade Botulinum Toxin Type A for temporary improvement of moderate to severe glabellar lines
Why KSTATION
🧬 Active Ingredients and Composition
Highly purified and stable Botulinum Toxin Type A formulation in lyophilized powder form for optimal stability and efficacy.
Primary active ingredient derived from Clostridium Botulinum
100 UnitsEnsures long-term stability when stored correctly
Stabilized💡 Benefits and Functions
Temporary improvement of moderate to severe frown lines
Relaxation of corrugator and procerus muscles
Effects begin within 2-3 days of treatment
Results last approximately 3 to 4 months
Key Benefits
- Temporary improvement of moderate to severe glabellar lines
- Precise muscle relaxation for natural-looking results
- Refreshed and more youthful appearance
- Professional-grade formulation for optimal efficacy
Kamomis 100U works by temporarily blocking nerve signals to the injected muscles, leading to their relaxation and the smoothing of associated wrinkles for a natural, refreshed appearance.
🧪 Usage Protocol and Application
Reconstitute with sterile saline: 2.5ml for 4U/0.1ml concentration or 1.25ml for 8U/0.1ml concentration
Prepare total dose of 20U for glabellar lines treatment
Administer as five 4U injections into corrugator and procerus muscles
Ensure precise injection into target muscles for optimal results
Monitor patient and provide appropriate aftercare instructions
Use immediately after reconstitution. Any remaining solution should be discarded. For professional use only by qualified medical practitioners.
📊 Product Specifications
⚠️ Important Safety Information
For professional use only. Must be administered by qualified medical practitioners with appropriate training in cosmetic injection procedures.
- Store in refrigerator at 2-8°C
- Do not freeze the product
- Use immediately after reconstitution
- Discard any remaining solution after use
- Do not use if vial appears damaged
- Not for use in patients with known hypersensitivity to botulinum toxin
- Avoid use in presence of infection at injection site
- Use with caution in patients with neuromuscular disorders
- Proper injection technique essential to avoid complications
- Refrigerated storage required at 2-8°C
- Protect from light and moisture
- Check expiration date before use
- Follow proper sterile technique during preparation
❓ Frequently Asked Questions
A. Standard dilution varies based on patient needs and treatment area. Typically 2.5ml of 0.9% sterile saline to achieve 4U/0.1ml concentration, or 1.25ml for 8U/0.1ml concentration. A. Effects generally last for approximately 3 to 4 months. Onset of action is typically observed within 2-3 days, with maximum effect reached at 1-2 weeks. A. For glabellar lines, the recommended total dose is 20U, administered as five 4U injections into the corrugator and procerus muscles. A. Store in a refrigerator at 2-8°C. Do not freeze the product. Do not use if the vial appears damaged. The product should be used immediately after reconstitution. A. Kamomis 100U is for professional use only and should be administered by a qualified medical practitioner with appropriate training in cosmetic injection procedures.Q. What is the recommended dilution for Kamomis 100U?
Q. How long do the effects of Kamomis 100U last?
Q. What is the recommended dose for glabellar lines?
Q. How should Kamomis 100U be stored?
Q. Who can administer Kamomis 100U?
WONDERTOX 100 Units (1 Vial)
$35.00
Unit price perWONDERTOX 100 Units (1 Vial)
$35.00
Unit price perWONDERTOX
100 Units / 1 Vial
Why KSTATION
Product Overview
WONDERTOX Inj. 100 units is a premium botulinum toxin type A injection designed for facial aesthetic treatments. This precisely formulated product delivers temporary improvement of moderate to severe glabellar lines (frown lines) associated with corrugator and/or procerus muscle activity, as well as forehead lines and crow's feet.
Key Components
Key Benefits & Applications
Long-lasting results with average duration of 3-4 months for face-centric treatments
Administration Protocol
Product Specifications
| Specification | Value | Notes |
|---|---|---|
| Product Volume | 100 units / 1 vial | Lyophilized powder form |
| Storage Temperature | 2-8°C | Refrigerated storage required |
| Reconstitution Volume | 2.5 mL sterile saline | 0.9% preservative-free |
| Final Concentration | 4U/0.1 mL | After proper dilution |
| Shelf Life After Reconstitution | Use immediately / Max 24 hours | Store at 2-8°C, do not freeze |
| Treatment Area Focus | Face-centric procedures | Glabella, forehead, crow's feet |
Storage & Handling Requirements
- Store unopened vials in refrigerator at 2-8°C (36-46°F)
- Protect from light during storage
- Use reconstituted solution immediately or within 24 hours maximum under refrigerated conditions
- One vial should be used for one patient only
- Do not use if packaging is damaged or product appears discolored
- Solution should be clear and transparent after reconstitution
Safety Information & Precautions
Important Precautions
- Must be administered by licensed healthcare professionals only
- Proper patient assessment and medical history review required
- Use aseptic technique during reconstitution and injection
- Monitor for allergic reactions or adverse responses
- Ensure proper dosage calculation based on treatment area
- One vial per patient policy must be strictly followed
Contraindications
- Do not use if packaging is damaged or expiration date has passed
- Discard if particles or discoloration are observed after reconstitution
- Highly purified to remove any impurities for enhanced safety
- Maintain cold chain throughout handling and storage
Technical Advantages
The 100-unit formulation of WONDERTOX is specifically designed for face-centric cosmetic procedures, making it ideal for targeted facial aesthetic treatments. This optimized dosage provides:
Frequently Asked Questions
INNOTOX 50 Units (1 Vial)
$29.00
Unit price perINNOTOX 50 Units (1 Vial)
$29.00
Unit price perINNOTOX
50 Units per Vial
Why KSTATION
Product Overview
Compact Liquid Botulinum Toxin
- Ready-to-use liquid formulation - no reconstitution required
- Albumin, gelatin, and animal protein-free composition
- Ideal for single-session facial aesthetic procedures
- Quick onset of action within 1-2 days
Key Ingredients & Composition
- Clostridium Botulinum Toxin Type A
- Hall Strain The primary active ingredient derived from Hall strain, ensuring consistent and reliable muscle relaxation effects for cosmetic applications.
- L-Methionine
- Stabilizer Essential amino acid that serves as a stabilizing agent, maintaining the integrity and potency of the botulinum toxin in liquid form.
- Polysorbate 20
- Surfactant Non-ionic surfactant that enhances the stability and prevents aggregation of the active ingredient in the liquid formulation.
- Buffered Saline pH 7.0
- pH Buffer Maintains optimal pH level for maximum stability and bioavailability, ensuring consistent performance across different storage conditions.
Albumin-Free Advantage
Treatment Benefits & Results
- Effective for moderate to severe glabellar (frown) lines
- Excellent results for crow's feet and forehead wrinkles
- Ideal for chin and masseter reduction treatments
- Proven efficacy for treating blepharospasm
- Effective for hyperhidrosis (excessive sweating) treatment
Extended Treatment Value
Application Guidelines
Recommended Dosage by Treatment Area
Forehead Lines: 10-20 units across treatment area
Crow's Feet: 10-15 units per side
Targeted Treatments: 50U vial ideal for focused aesthetic procedures
Professional Administration Only
Storage & Handling Specifications
| Specification | Requirement | Details |
|---|---|---|
| Storage Temperature | 2-8°C | Refrigerated storage required |
| Shelf Life (Unopened) | 24-36 months | From manufacturing date |
| Usage After Opening | Use immediately | Can store up to 4 weeks refrigerated |
| Formulation Type | Liquid | Ready-to-use, no reconstitution |
| Volume per Vial | 50 Units | Single vial packaging |
Optimal Storage Conditions
Safety Information & Precautions
- Avoid rubbing or applying pressure to treated areas
- Follow post-treatment care instructions carefully
- Avoid strenuous exercise immediately after treatment
- Discontinue blood-thinning medications as advised by practitioner
Potential Side Effects
Rare but serious: Allergic reactions including itching, hives, or swelling. Seek immediate medical attention if severe reactions occur.
Contraindications
Clinical Applications
Targeted Treatment Capability
Product Advantages
Ready-to-Use Innovation
Enhanced Safety Profile
Precision Application
Optimal Sizing
Professional Specifications
| Parameter | Specification | Clinical Relevance |
|---|---|---|
| Active Ingredient | Botulinum Toxin Type A | Hall strain for consistency |
| Formulation | Liquid (Ready-to-Use) | No reconstitution required |
| Protein Content | Albumin-free | Reduced allergic risk |
| Onset Time | 1-2 days | Faster results |
| pH Level | 7.0 (Buffered) | Optimal stability |
Quality Assurance
Frequently Asked Questions
- What is INNOTOX used for?
- INNOTOX is used for moderate to severe glabellar (frown) lines, crow's feet, and forehead wrinkles, as well as chin and masseter reduction treatments, blepharospasm, and hyperhidrosis (excessive sweating).
- How soon does INNOTOX work and how long do results last?
- Onset of action is typically within 1-2 days, with peak effect around 7 days. Results typically maintain for 3-6 months, with some patients experiencing benefits up to 10 months depending on individual metabolism, dosage, and treatment area.
- Does INNOTOX require reconstitution?
- No. INNOTOX is a ready-to-use, albumin-free liquid botulinum toxin formulation that requires no reconstitution, allowing it to be drawn directly from the vial for immediate use.
- Who should administer INNOTOX?
- INNOTOX is strictly for professional use and must be administered by qualified medical professionals trained in botulinum toxin injection techniques and facial anatomy. It is contraindicated in patients with known hypersensitivity to botulinum toxin or any component, and should be avoided during pregnancy, breastfeeding, or in patients with neuromuscular disorders.
- Who manufactures INNOTOX?
- INNOTOX is manufactured by Medytox Inc. under strict quality control standards, with each batch tested for potency, purity, and safety.
LIZTOX 100 Units (1 Vial)
$36.00
Unit price perLIZTOX 100 Units (1 Vial)
$36.00
Unit price perLIZTOX™ Injection
100 Units per Vial
Why KSTATION
Product Overview
LIZTOX™ (Clostridium Botulinum Toxin Type A) 100 Units is a premium botulinum toxin solution designed for professional medical and aesthetic applications. This high-purity formulation (99.8% purity) provides exceptional results for treating moderate to severe facial wrinkles and various therapeutic conditions with minimal risk of resistance.
Key Components
Key Benefits & Applications
Professional results with minimal downtime and high patient satisfaction rates
Professional Usage Protocol
Treatment Timeline
Onset is typically observed around 3 days, with peak effects occurring within 1-2 weeks post-treatment. Results generally last 3-4 months, with some cases extending up to 8 months.
Product Specification Guide
| Volume | Main Use | Risk of Resistance | Duration | Treatment Area |
|---|---|---|---|---|
| 100U | Facial aesthetic procedures | Low (due to high purity) | 3-4 months | Glabella, crow's feet, forehead lines, minor areas |
The 100U vial is ideal for face-centric treatments, generally sufficient for procedures involving facial muscles with precise formulation for controlled injections.
Storage & Handling Specifications
| Parameter | Requirement | Notes |
|---|---|---|
| Storage Temperature | 2-8°C | Refrigerated storage required |
| Reconstitution | 2.5ml 0.9% Saline | Gently swirl, do not shake |
| Use After Reconstitution | Within 24 hours | Keep refrigerated after mixing |
| Package Contents | 1 Vial - 100 Units | Lyophilized powder |
| Purity Level | 99.8% | High purity formulation |
Important Handling Notes
- Do not use if vacuum seal on the vial is compromised upon opening
- The product comes as a lyophilized powder in a colorless, transparent vial
- Avoid vigorous shaking during reconstitution to prevent protein denaturation
- Use sterile technique throughout preparation and administration
- Intended for professional use only by trained medical professionals
Safety Information & Precautions
General Precautions
- Only for use by qualified medical professionals
- Proper patient assessment required before treatment
- Sterile injection technique must be maintained
- Monitor patients for adverse reactions
- Maintain proper cold chain storage at 2-8°C
Contraindications
- Pregnancy and breastfeeding
- Known allergies to botulinum toxin or albumin
- Neuromuscular disorders
- Active infection at injection site
- Avoid concurrent use of other botulinum toxin products
Manufacturer Information
Huons Biopharma Co., Ltd.
Leading manufacturer of premium botulinum toxin products with advanced manufacturing facilities and strict quality control standards.
Quality Assurance
Each batch undergoes rigorous testing and quality control measures to ensure consistent potency, purity, and safety. The high-purity formulation (99.8%) helps minimize the risk of developing resistance or neutralizing antibodies.
Frequently Asked Questions
LIZTOX 200 Units (1 Vial)
$52.00
Unit price perLIZTOX 200 Units (1 Vial)
$52.00
Unit price perLIZTOX Injection
200 Units per Vial
Why KSTATION
Product Overview
LIZTOX Injection 200 Units is a premium botulinum toxin type A solution designed for professional medical and aesthetic applications. This high-purity formulation provides exceptional results for treating moderate to severe facial wrinkles, hyperhidrosis, and various muscular conditions.
Key Components
Key Benefits & Applications
Professional results with minimal downtime and high patient satisfaction rates
Professional Usage Protocol
Treatment Timeline
Effects typically become visible within 3-7 days post-treatment, with maximum effect appearing within 1-2 weeks. Results generally last 3-4 months, with some cases extending up to 6 months.
Product Comparison Guide
| Volume | Main Use | Risk of Resistance | Duration | Treatment Area |
|---|---|---|---|---|
| 100U | Facial cosmetic procedures | Low | 3-4 months | Glabellar lines, crow's feet, forehead |
| 200U | Combined facial + body treatments | Low | 3-5 months | Glabellar lines, forehead, hyperhidrosis, calves |
The 200U version offers greater versatility for comprehensive treatment plans and multiple application areas in a single session.
Storage & Handling Specifications
| Parameter | Requirement | Notes |
|---|---|---|
| Storage Temperature | 2-8°C | Refrigerated storage required |
| Reconstitution | 5ml 0.9% Saline | Gently swirl, do not shake |
| Use After Reconstitution | Immediately | Do not store after mixing |
| Package Contents | 1 Vial - 200 Units | Single use vial |
| Shelf Life | As per package labeling | Check expiration date |
Important Handling Notes
- The vial may appear empty but contains lyophilized powder under pressure
- Avoid vigorous shaking during reconstitution to prevent protein denaturation
- Use sterile technique throughout preparation and administration
- Intended for professional use only by trained medical professionals
Safety Information & Precautions
General Precautions
- Only for use by qualified medical professionals
- Proper patient assessment required before treatment
- Sterile injection technique must be maintained
- Monitor patients for adverse reactions
- Maintain proper cold chain storage
Contraindications
- Pregnancy and breastfeeding
- Known allergies to botulinum toxin or albumin
- Neuromuscular disorders
- Active infection at injection site
- Certain medications that affect neuromuscular transmission
Manufacturer Information
Huons Biopharma Co., Ltd.
Leading manufacturer of premium botulinum toxin products with advanced manufacturing facilities and strict quality control standards.
Quality Assurance
Each batch undergoes rigorous testing and quality control measures to ensure consistent potency, purity, and safety. Complete batch tracking and documentation available for regulatory compliance.
Frequently Asked Questions
FINETOX 100 Units (1 Vial)
$28.00
Unit price perFINETOX 100 Units (1 Vial)
$28.00
Unit price perFINETOX 100 Units
Clostridium Botulinum Toxin Type A
Temporarily blocks the release of neurotransmitters in the muscles, inhibiting muscle contraction and reducing muscle volume.
Manufactured using a vacuum-drying process. Pre-clinical studies (MRI and EMG on rat models) demonstrate high muscle relaxation activity and volume reduction efficacy comparable to leading global brands.
Temporary improvement of moderate to severe wrinkles and reduction of targeted muscle volume.
Glabellar wrinkles associated with the activity of the corrugator and/or procerus muscles in adults between the ages of 19 and 65.
Pre-clinical studies indicate significant muscle reduction from 4 weeks post-injection, sustained up to 24 weeks.
Use immediately or within 24 hours after reconstitution.
Localized pain, swelling, redness, bruising, or mild headaches.
- Avoid rubbing or massaging the treated area.
- Refrain from strenuous exercise or saunas for a few days post-treatment.
FINETOX 100 Units is used for temporary improvement of moderate to severe wrinkles and reduction of targeted muscle volume, specifically glabellar wrinkles associated with the activity of the corrugator and/or procerus muscles in adults between the ages of 19 and 65.
Pre-clinical studies indicate significant muscle reduction from 4 weeks post-injection, sustained up to 24 weeks.
It is administered by intramuscular injection. Dissolve in sterile normal saline to form a transparent solution prior to administration.
FINETOX 100 Units is for professional medical use only and should be administered by a qualified medical professional.
FINETOX 100 Units is manufactured by Daejong Meditec Co., Ltd.
TOXTA 100 Units (1 Vial)
$40.00
Unit price perTOXTA 100 Units (1 Vial)
$40.00
Unit price perTOXTA 100unit
Premium Botulinum Toxin Type A (1 Vial)
High-purity botulinum toxin formulation for cosmetic procedures and muscle relaxation treatments
Professional-grade botulinum toxin for precise cosmetic applications
- Primary Active Component
- Clostridium Botulinum Toxin Type A - high-purity formulation with exceptional potency and consistency.
- Manufacturing Standards
- Manufactured using European National Institute botulinum toxin strain, complying with cGMP standards for pharmaceutical excellence.
-
Wrinkle Improvement
Effective reduction of mimic wrinkles and fine lines including forehead, glabella, and crow's feet -
Muscle Relaxation
Relaxation of excessive muscle contractions for smoother, more youthful appearance -
Facial Contouring
Correction of facial contours including V-line lifting through masseter muscle treatment -
Low Resistance Risk
High purity and low protein content contribute to minimal risk of developing immune resistance
Results typically visible within 5-14 days with maximum effect appearing in 1-2 weeks.
Treatment Areas
- Forehead lines and wrinkles
- Glabella (frown lines between eyebrows)
- Crow's feet (periorbital lines)
- Lip contour refinement
- Masseter muscle for jawline contouring
| Volume | Main Use | Risk of Resistance | Duration | Treatment Area |
|---|---|---|---|---|
| 100U | Facial cosmetic procedures, fine lines, small muscle treatment | Low | Up to 4 months | Forehead, glabella, crow's feet, lip contour |
| 200U | Combined facial and larger muscle treatments | Low | Up to 4 months | Masseter muscles, trapezius, calves |
Post-Treatment Precautions
- Do not press or rub the injection area to prevent toxin spreading
- Avoid smoking, drinking, sauna, and strenuous exercise for at least two weeks
- After masseter muscle treatment, avoid chewing hard foods
- Follow all post-care instructions provided by your practitioner
Which Product is Right for Me?
Choose by considering the number of units needed for your treatment area and purpose.
TOXTA 100unit: Ideal for face-centric treatments such as fine lines, forehead wrinkles, glabella, and crow's feet. Perfect for patients seeking targeted facial rejuvenation.
TOXTA 200unit: More appropriate for combined facial and body treatments or larger muscle areas including masseter muscles, trapezius, and calves.