MESOTHERAPY

• 4-Type Bio-Exosomes: 14 Billion particles/mL (Lactobacillus, Panax Ginseng Callus, Cica/Centella, Camellia).
• PDRN (Salmon DNA): 30,000 ppm (3%) – High-purity, Wild Alaskan salmon-derived.

• Collagen Complex: Atelocollagen (98% bio-similarity) + Hydrolyzed Collagen.
• Peptide Complex: 8 Amino Acid Peptides including Acetyl Hexapeptide-8 and Palmitoyl Pentapeptide-4.
• Glutathione: High purity antioxidant for brightening.

Exosomes restore cell-to-cell communication to reprogram aging cells. PDRN corrects cellular memory and accelerates healing. Collagen improves density, and Peptides trigger selective repair.

• Skin Reprogramming: Restores self-healing capacity and cellular communication.
• Intense Glow & Hydration: Instantly revitalizes dry, dull skin.
• Structural Reinforcement: Improves firmness, density, and elasticity (Lifting).
• Soothing & Repair: Calms inflammation and strengthens the skin barrier.

Unlike single-ingredient boosters, ExoLume is a premium "All-in-One" regenerative solution combining Exosomes, PDRN, Collagen, and Peptides to target "Reprogramming" aging skin rather than temporary fixes.

• Unopened: Refer to package expiration.
• Reconstituted: Use within 72 hours (Keep refrigerated).

• Avoid direct sun exposure for 24–48 hours.
• Avoid aggressive exfoliation or chemical treatments for 3–5 days.
• Hydrate well and apply mild moisturizer/sunscreen.
  

What is ExoLume used for?

ExoLume is an advanced bio-exosome skin booster used for skin reprogramming, intense glow and hydration, structural reinforcement (firmness, density, elasticity), and soothing and barrier repair.

What are the key ingredients?

It contains 4-Type Bio-Exosomes (14 Billion particles/mL), PDRN (Salmon DNA) at 30,000 ppm (3%), a Collagen Complex (Atelocollagen + Hydrolyzed Collagen), an 8 Amino Acid Peptide Complex, and Glutathione.

How is the powder prepared before use?

Disinfect both vials, then slowly inject the solvent (Vial 2) into the powder (Vial 1) and swirl gently until dissolved. Use the reconstituted product within 72 hours, keeping it refrigerated.

Who should administer ExoLume?

ExoLume is for professional use only and is applied via mesotherapy (point-by-point/meso-gun) or microneedling (MTS).

Who manufactures ExoLume?

ExoLume is manufactured by Phace Global Co., Ltd.

Juveheal B utilizes "ICT Technology" (Intracellular Transduction) to deliver Botulinum Peptide and PDRN deep into skin cells. The peptide mimics botulinum toxin action to lift sagging skin and muscles without toxicity, while PDRN and 3GF repair the barrier and stimulate renewal. Lotus Flower Water replaces purified water for enhanced soothing.

• Lifting & Firming: "Double Lifting" effect targeting sagging skin and muscles via Botulinum peptide.
• Pore Reduction: Tightens pores and improves overall skin texture.
• Barrier Strengthening: PDRN recovers damaged skin barriers.
• Deep Hydration: Provides moisture and a "water glow" effect.

Full face, specifically areas with sagging pores, loss of elasticity, or weakened skin barrier.

Remove the plastic flip-off cap and aluminum seal; apply using a dropper or syringe.

Store in a cool, shaded place away from direct sunlight.

• Temporary redness or irritation may occur if used with MTS/microneedling.

• Apply a soothing mask or regenerative cream after use.

What is Juveheal B used for?

Juveheal B is a lifting and pore tightening ampoule. It provides a double lifting effect on sagging skin and muscles, reduces pores and improves texture, strengthens the skin barrier, and delivers deep hydration.

What are the key ingredients?

The primary active ingredients are Botulinum Peptide (Botulpeptide), PDRN (Salmon DNA), a 3GF Complex, and Hyaluronic Acid, with functional Niacinamide 2.0% and Adenosine 0.04%.

How is it applied?

It is applied topically and optimized for use with MTS (Microneedling), Derma Pen, or Derma Stamp to maximize peptide penetration, recommended 1 session per week.

Who should administer Juveheal B?

Juveheal B is for external (topical) use only. For maximum penetration it is used with professional devices such as MTS, Derma Pen, or Derma Stamp under professional guidance.

Who manufactures Juveheal B?

Juveheal B is manufactured by J MEDICAL Inter Co., Ltd.

Tranexamoyl Dipeptide-23, Glutathione, Vitamin C, Arbutin, Niacinamide, and Sodium DNA.

Peptides (Tetrapeptide, Oligopeptide-2/IGF-1, Polypeptide-1/bFGF), N-Acetyl Glucosamine, and Pantothenic Acid (Vitamin B5).

The active components block the action of tyrosinase (the enzyme responsible for melanin formation) to effectively reduce melanin production. The formula actively integrates with cellular metabolism to deliver progressive multi-step whitening from the surface to the deeper epidermal layer, while peptides and vitamins stimulate skin regeneration and elasticity.

Exceptional biocompatibility that is free from cytotoxic effects. It features a stable formulation that minimizes irritation and provides powerful antioxidant defense against environmental damage.

• Intensive skin whitening and brightening.
• Reduction of deep-rooted pigmentation and dark spots.
• Improvement of skin elasticity and texture.
• Pore size reduction and overall anti-aging rejuvenation.

• Face: 1.5–2.0mL
• Neck: 1.0–1.5mL
• Décolletage: 2.0–2.5mL
• Hands: 2.0–3.0mL

Cycle: Standard mesotherapy protocols generally recommend 3–5 sessions at 1–2 week intervals.
Duration: Progressively achieves deeper, more pronounced lightening over time. The anti-aging and brightening benefits are long-lasting, with effects persisting for up to 9 months.

Keep away from direct sunlight and excessive heat. Intended for professional use; strictly discard any remaining solution after opening a vial.

Mild redness, swelling, or pinpoint bruising associated with the injection or microneedling procedure.

• Apply sunscreen diligently to protect the treated areas and prevent UV-induced pigmentation.
• Avoid direct sunlight, saunas, and harsh environments for a few days post-treatment.

It is a whitening and pigmentation mesotherapy solution for intensive skin brightening, reducing deep-rooted pigmentation and dark spots, and improving skin elasticity and texture.

Tranexamoyl Dipeptide-23, Glutathione, Vitamin C, Arbutin, Niacinamide, and Sodium DNA, which inhibit tyrosinase to reduce melanin production.

Over a course of 3–5 sessions at 1–2 week intervals, the anti-aging and brightening benefits are long-lasting, with effects persisting for up to 9 months.

Intended for use by certified cosmetologists and medical professionals only, via mesotherapy injection or MTS; intravascular injection is strictly prohibited.

It is manufactured by Cosmoderma Inc.

The minimal cross-linking technology creates a structure that remains in the dermis longer than non-cross-linked HA. This provides sustained deep hydration, structural renewal of the skin matrix, and bio-stimulation of endogenous collagen.

• Long-lasting Deep Hydration: Improved moisture retention compared to non-cross-linked boosters.
• Skin Lifting & Tightening: Improves skin elasticity and firmness.
• Wrinkle Reduction: Smoothes fine lines, crow's feet, and micro-wrinkles.
• Skin Tone Improvement: Brightens complexion and reduces dullness.
• Pore Refinement: Helps to narrow enlarged pores.

Supplied as ready-to-use pre-filled syringes. Ensure strict aseptic technique during administration.

Store away from direct sunlight and avoid extreme heat. Do not freeze. Single-use only.

• Erythema (redness) or swelling at injection site
• Pain, itching, or bruising
• Symptoms usually resolve within a few days

• Avoid makeup for 12–24 hours.
• Avoid saunas, steam rooms, and intense exercise for 1 week.
• Apply sun protection diligently.

It is used for long-lasting deep hydration, skin lifting and tightening, wrinkle reduction, skin tone improvement, and pore refinement.

Its primary active ingredient is Hyaluronic Acid (HA) 15mg/mL (minimally cross-linked), buffered with Phosphate Buffered Saline (PBS) pH 7.0.

Visible results appear in 1–2 weeks and effects last 6–8 months. A course of 3–4 sessions spaced 3–4 weeks apart is recommended.

It is intended for professional use by licensed medical practitioners only.

REGENOVUE Aqua Shine Plus is manufactured by NeoGenesis Co., Ltd.

• c-PDRN (Cosmetic Polydeoxyribonucleotide): Hydrolyzed DNA from salmon, optimized for skin absorption to repair damaged cells.
• Sodium Hyaluronate (HA): High-quality European hyaluronic acid for intense hydration.

A Double Effect system where HA provides immediate deep hydration and volume support, while c-PDRN penetrates the barrier to stimulate biological regeneration and collagen synthesis.

• Deep Hydration (Hydro-Lifting): Relieves inner skin dryness and provides a radiant "water glow."
• Skin Regeneration: Repairs skin barrier damaged by external irritation or aesthetic procedures (e.g., lasers).
• Texture Improvement: Softens rough skin texture and improves elasticity.
• Soothing: Calms sensitive and tired skin.

Apply to cleansed skin. Highly recommended for use with aesthetic devices such as MTS (Microneedling), Electroporation, or Iontophoresis to enhance penetration.

• Intensive Care: 3–5 sessions at 1–2 week intervals.
• Maintenance: 1 session every 1–2 months.

Mild redness or irritation may occur if used with aggressive MTS, usually subsiding within 24 hours.

What is Rejuvenex Hydro Essence used for?

Rejuvenex Hydro Essence is a hydro-lifting skin booster used for deep hydration and a radiant water glow, skin barrier regeneration (including post-procedure repair), texture improvement, and soothing sensitive or tired skin.

What are the key ingredients?

The primary active ingredients are c-PDRN (Cosmetic Polydeoxyribonucleotide, hydrolyzed salmon DNA) and Sodium Hyaluronate (Hyaluronic Acid).

How is it applied?

It comes in a ready-to-use pre-filled syringe and is applied to cleansed skin. It is highly recommended for use with aesthetic devices such as MTS (Microneedling), Electroporation, or Iontophoresis. Intensive care is 3–5 sessions at 1–2 week intervals.

Who should administer Rejuvenex Hydro Essence?

It is for external (topical) use only. When combined with aesthetic devices such as MTS, Electroporation, or Iontophoresis, it should be used under professional guidance.

Who manufactures Rejuvenex Hydro Essence?

Rejuvenex Hydro Essence is manufactured by PharmaResearch Co., Ltd.

• A2A Receptor Activation: PDRN binds to adenosine A2A receptors to exert anti-inflammatory effects and repair damaged tissues.
• Salvage Pathway: Provides nucleosides (DNA precursors) via the salvage pathway to promote rapid DNA synthesis and cell proliferation.
• Growth Factor Stimulation: Promotes the secretion of VEGF and other growth factors to aid angiogenesis and wound healing.

• Tissue Regeneration: Repairs damaged skin barrier, improves skin thickness, and treats ligament/tendon injuries.
• Pore & Scar Reduction: Diminishes acne scars and tightens pores.
• Rapid Healing: Accelerates wound healing and provides anti-inflammatory support.
• Texture Improvement: Enhances overall skin texture and hydration.

• Medical (Systemic/Local): Intramuscular (IM) or Subcutaneous (SC) injection.
• Aesthetic (Off-label): Intradermal (ID) injection (Mesotherapy) or MTS (Microneedling) application to the face.

• Mild pain, redness, or swelling at the injection site.
• Bruising from the needle insertion.

What is Rejuvenex Forte used for?

Rejuvenex Forte is a high-concentration PDRN solution used for tissue regeneration, pore and scar reduction, rapid wound healing with anti-inflammatory support, and overall skin texture improvement.

What is the key ingredient?

The primary active ingredient is Polydeoxyribonucleotide Sodium (PDRN) at 14.06mg per 2.5mL, derived from salmon DNA.

How long do results last?

Visible skin improvements are often noted after 3–4 sessions, and tissue regeneration effects are cumulative. The typical course is 1 session per week for 3–5 weeks.

Who should administer Rejuvenex Forte?

It is an ethical drug (ETC) administered by injection, including intramuscular or subcutaneous injection and aesthetic intradermal (mesotherapy) or MTS application, and should be administered by a qualified medical professional.

Who manufactures Rejuvenex Forte?

Rejuvenex Forte is manufactured by PharmaResearch Co., Ltd.

• Ultra-Pure Plant Exosome: 500 Million nano-sized particles/ml for deep cellular absorption.
• Premium PDRN: Derived from Alaskan salmon to boost cellular repair and circulation.

Exosomes stimulate follicle regeneration and reduce inflammation, while PDRN boosts scalp recovery. The added Peptide & Enzyme complex strengthens roots and balances the scalp environment.

• Hair Growth & Density: Reactivates dormant follicles; 89% of users noticed denser, stronger hair.
• Reduced Shedding: 93% reported visibly less hair shedding.
• Scalp Health: Calms inflammation and strengthens the moisture barrier for improved comfort.

• 1. Prepare: Cleanse and disinfect scalp. Apply 1/2 vial to create a moist glide.
• 2. MTS Procedure: Glide sterile cartridge (depth 0.5-1.2mm) in straight/overlapping passes.
• 3. Absorb: Apply remaining 1/2 vial and lightly massage for 1-2 minutes.
• 4. Soothe: Finish by applying 'Exosome Nurturing Solution' (Tube) to lock in actives.

Store away from direct sunlight. Vials are for single use; do not store open vials due to lack of preservatives.

• Mild redness, heating sensation, or slight swelling (subsides within hours).

• Avoid washing hair for at least 4-6 hours post-treatment.
• Avoid saunas, heavy sweating, or swimming for 24 hours.

A synergistic effect of Hydration (HA), Regeneration (PDRN), and Cellular Recharging (NAD+). It acts as a bio-stimulator to activate the skin's natural healing and energy production cycles.

• Deep Hydration & Glow: Provides an instant moisture boost and "water glow" radiance.
• Skin Regeneration: Repairs damaged skin barrier and improves texture.
• Cellular Energy: NAD+ boosts ATP production for enhanced cell renewal.
• Anti-Aging: Softens fine lines, improves elasticity, and tightens pores.

Rejuva Healer S is marketed as a 4th Generation Skin Booster. It eliminates the need to layer multiple products by combining the benefits of HA (1st Gen), PDRN (2nd Gen), and Exosomes (3rd Gen) with the added cellular energy boost of NAD+.

What is Rejuva Healer S used for?

Rejuva Healer S is a 4th generation NAD+ skin booster used for deep hydration and glow, skin regeneration and barrier repair, cellular energy boosting, and anti-aging (softening fine lines, improving elasticity, and tightening pores).

What are the key ingredients?

The primary active ingredients are PDRN 2% (Salmon DNA), Hyaluronic Acid 17mg/mL (non-crosslinked), and NAD+ (Nicotinamide Adenine Dinucleotide).

How long do results last?

Hydration and glow are visible immediately after the 1st session, while texture, pore, and elasticity improvements become prominent after the 3rd session. The standard cycle is 3 to 5 sessions spaced 2–3 weeks apart.

Who should administer Rejuva Healer S?

It is for external/professional use only and is administered by injection (papule or nappage technique) using a 30G × 4mm or 32G needle, and should be administered by a qualified professional.

Who manufactures Rejuva Healer S?

Rejuva Healer S is supplied by Phace Global / Esta Global.

Juveheal V uses ICT (Intracellular Transduction) Technology to enhance the penetration of its complex formula into skin cells. It creates an ideal environment for fibroblast activation, regenerating skin components and providing intense hydration for a "Water Glow" effect.

• Radiance & Glow: Instantly improves skin tone and luminosity (Gwangchae).
• Deep Hydration: Restores moisture balance and treats inner dryness with high-dose HA.
• Vitality & Rejuvenation: Revitalizes tired, dull skin and improves overall skin health.
• Barrier Reinforcement: Strengthens the skin's natural defense system.

Full face, specifically for dull, dehydrated, or tired-looking skin.

Remove the flip-off cap and aluminum seal; apply using a dropper or syringe.

Store in a cool, shaded place away from direct sunlight.

• Mild redness or irritation may occur immediately after MTS application but typically subsides within 24 hours.

• Apply a soothing mask and sunscreen.
• Avoid heavy makeup for 24 hours.

What is Juveheal V used for?

Juveheal V is a vitality and radiance ampoule. It improves skin tone and luminosity, provides deep hydration with high-dose HA, revitalizes tired and dull skin, and reinforces the skin barrier for a Water Glow effect.

What are the key ingredients?

The primary active ingredients are High Concentration HA (3,500ppm), Multi-Growth Factors (EGF, FGF, VEGF, IGF), and a Multi-Ingredient Complex of 60+ active ingredients including PDRN.

How is it applied?

It is applied topically and optimized for use with MTS, Derma Pen, or Derma Stamp to facilitate deep absorption. The recommended course is 3 to 5 sessions total, 1 session every 1–2 weeks.

Who should administer Juveheal V?

Juveheal V is for external/cosmetic microneedling use only. For deep absorption it is used with professional devices such as MTS, Derma Pen, or Derma Stamp under professional guidance.

Who manufactures Juveheal V?

Juveheal V is manufactured by J MEDICAL Inter Co., Ltd.

Juveheal A features a dual growth factor action where EGF repairs the epidermis and FGF2 stimulates the dermis for improved skin density. Adenosine actively encourages collagen production to correct fine lines, while the Lotus water base provides deep hydration and soothing effects.

• Anti-Aging & Wrinkle Improvement: Specifically targets fine lines and deep wrinkles.
• Skin Vitality & Radiance: Restores a healthy glow to tired or aging skin.
• Elasticity Boost: Improves skin firmness and lifting effect.
• Deep Nutrition: Delivers concentrated nutrients to the skin layers.

Full face (especially areas with fine lines like eyes, forehead, nasolabial folds), Neck.

Ready-to-use liquid ampoule (tear off the plastic cap and aluminum seal to open).

Avoid direct sunlight, high temperature, and high humidity.

• Mild redness or irritation may occur, especially if used with MTS/microneedling (subsides within 1-2 days).

• Use a soothing mask (e.g., cooling sheet mask) after application.
• Apply sun protection.

What is Juveheal A used for?

Juveheal A is an anti-aging and wrinkle care ampoule. It targets fine lines and deep wrinkles, restores skin vitality and radiance, boosts elasticity and firmness, and delivers deep nutrition to the skin.

What are the key ingredients?

The primary active ingredients are Adenosine 0.04%, EGF (Rh-Oligopeptide-1), FGF2 (Rh-Polypeptide-1), and Hydrolyzed Collagen, with a Lotus Flower Water base.

How is it applied?

It is a ready-to-use liquid ampoule applied topically after cleansing. It is highly recommended for use with professional devices such as MTS, Derma Pen, or Electroporation to enhance absorption, typically 1 session per week.

Who should administer Juveheal A?

Juveheal A is for external (topical) use only. For enhanced absorption it is used with professional devices such as MTS, Derma Pen, or Electroporation under professional guidance.

Who manufactures Juveheal A?

Juveheal A is manufactured by J MEDICAL Inter Co., Ltd.

• NAD+ (25%): Boosts cellular energy (ATP) and promotes DNA repair for intense skin renewal and vitality.
• PDRN (3%) & PN (1%): Accelerates tissue repair, healing, and skin renewal.
• Plant-derived Exosomes (3 Types): Delivers powerful regenerative signals to support structural repair.
• Atelocollagen (Hydrolyzed): Provides structural support and enhances skin elasticity.

Acts as an advanced multi-booster that reprograms the skin at the cellular level. By enhancing cellular energy (ATP production), it supports faster skin turnover, maximizes collagen synthesis, and delivers deep revitalization.

• Radiance & Glow: Reveals a fresh glow and enhances natural luminosity for a brighter complexion.
• Texture Refinement: Creates a smoother, more refined, and even-looking skin surface.
• Revitalization & Hydration: Provides deep hydration and healthier-looking skin with long-lasting regeneration.

Standard Cycle: 3–5 sessions spaced 1–2 weeks apart.
Onset of Effect: Initial hydration and glow appear within days. Optimal cellular repair and collagen effects become visible after 2–4 weeks.

Because it contains lyophilized exosomes and NAD+, the reconstituted solution must be used immediately and should not be saved or reused.

• Common Effects: Mild redness, swelling, or pinpoint bruising associated with the MTS or injection procedure.
• Post-Care: Apply soothing cream or masks. Strictly avoid direct sun exposure, saunas, and strenuous exercise for at least 24-48 hours. Apply sunscreen diligently.

It is a cellular renewal multi-booster for radiance and glow, texture refinement, and deep revitalization and hydration across the face, neck/décolleté, and hands.

NAD+ (25%), PDRN (3%) & PN (1%), plant-derived exosomes (3 types), and hydrolyzed atelocollagen.

Reconstitute the lyophilized exosome/NAD powder with the provided 6mL solvent, mixing thoroughly until fully dissolved before application; use the reconstituted solution immediately.

Strictly for professional medical/aesthetic use via MTS or intradermal micro-injections; do not inject intravascularly.

• HA (H-HA & L-HA): 192.00mg Total. Provides deep/surface hydration and blocks free radicals.
• Sodium Succinate: 96.00mg. Reinforces the skin barrier and stimulates metabolic processes.
• PDRN & PN: 5.00mg Total. Stimulates fibroblasts, accelerates cell renewal, and boosts wound healing.
• NAD+: Boosts cellular energy (ATP), promotes DNA repair, and targets senescent cells.
• Glutathione & Tranexamic Acid: Inhibits melanin, fades dark spots, and provides strong brightening effects.

A next-generation multi-functional skin booster combining highly effective ingredients for total anti-aging, whitening, and hydration, designed to leave no residues in the body with FDA proven safety.

• Brightening & Clarity: Reduction of hyperpigmentation, dark spots, and patches.
• Anti-Aging: Reduction of fine wrinkles, smoothing of skin texture, and stimulation of collagen.
• Hydration & Firmness: Volume replenishment and improvement in elasticity.
• Healing & Calm: Reduction of inflammation, calming of redness, and under-eye rejuvenation.

Cycle: 2-3 treatments at 1-month intervals.
Duration: Skin improvement and volume restoration effects are long-lasting, maintaining for 4 to 8 months.

Typically 24-36 months from the manufacturing date (unopened). Use immediately after mixing with saline. Discard any remaining solution after opening (single-use vial).

• Side Effects: Mild swelling, bruising, redness, and tenderness at the injection sites.
• Post-Care: Apply sunscreen regularly. Avoid heavy makeup immediately after the procedure, and refrain from exposure to extreme heat (saunas) or strenuous exercise during the initial recovery period.

It is a next-generation multi-functional skin booster for total anti-aging, brightening (reducing hyperpigmentation and dark spots), hydration, firmness, and skin healing.

HA (H-HA & L-HA, 192.00mg), Sodium Succinate (96.00mg), PDRN & PN (5.00mg), NAD+, and Glutathione & Tranexamic Acid for brightening.

Reconstitute by injecting 1mL of normal saline into the vial and shaking well before use. A cycle of 2-3 treatments at 1-month intervals gives effects lasting 4 to 8 months.

Strictly for professional medical use; deep dermis injections must only be performed by professionals and must not be intravascular.

It is manufactured by Healink Korea.

Advanced Cross-linked HA creates a stable 3D matrix to lock in moisture and restore elasticity, while Glutathione acts as a powerful antioxidant to brighten skin tone, fade pigmentation, and detoxify tired skin.

• Deep & Long-Lasting Hydration: Locks in moisture for months.
• Radiance & Tone: Brightens skin tone and fades pigmentation (Whitening effect).
• Elasticity & Plumping: Restores firmness and smooths fine lines.
• Detox & Protection: Fights oxidative stress and revitalizes congested skin.

Single-use vials. Discard any remaining solution after opening.

It is a whitening and hydration skin booster that brightens skin tone, fades pigmentation, and delivers deep long-lasting hydration for the face and body.

Cross-linked Hyaluronic Acid (10 mg/mL) and Glutathione (1 mg/mL), combining a moisture-locking HA matrix with antioxidant brightening.

A standard course is 5 sessions total, spaced 2–3 weeks apart.

For external/professional use only, injected by a qualified practitioner using micropapular, nappage, or linear/retrograde techniques.

It is manufactured by Phace Global Co., Ltd.

• HA (H-HA & L-HA): 100.00mg Total. Deep hydration and metabolic stimulation.
• Sodium Succinate: 80.50mg. Synergizes with HA for intense moisture.
• PDRN & PN: 6.00mg Total (Increased concentration). Accelerates cell renewal and collagen generation.
• RH Collagen: 1.50mg. Directly supplements structural proteins for immediate firming.
• NAD+: Boosts cellular energy (ATP) and repairs DNA.
• Glutathione & Tranexamic Acid: Inhibits melanin synthesis and provides overall skin brightening.

Acts as a complete "Skin Vitalizer". It delivers a comprehensive anti-aging, whitening, and regenerating effect in a single, ready-to-use syringe without leaving any residues in the body.

• Brightening & Lightening: Significantly fades dark spots, pigmentation, and brightens skin tone.
• Anti-Aging & Firming: Stimulates collagen generation, reduces fine wrinkles, and improves skin elasticity.
• Hydration & Volume: Replenishes volume, provides a lifting effect, and enhances skin compliance.
• Rejuvenation & Repair: Rejuvenates under-eye areas, reinforces the skin barrier, and accelerates wound healing.

Cycle: 2-3 treatments at 1-month intervals.
Duration: Volume replenishment and skin rejuvenation effects maintain for 4 to 8 months.

Typically 24–36 months from the manufacturing date (unopened). Single-use only; strictly discard any remaining product after use.

• Side Effects: Mild swelling, redness, bruising, tenderness, or temporary papules at the injection sites.
• Post-Care: Apply sunscreen regularly. Avoid heavy makeup immediately after the procedure, and refrain from exposure to extreme heat (saunas) or strenuous exercise during the initial recovery period.

It is a multi-functional skin booster ("Skin Vitalizer") for brightening, anti-aging and firming, hydration and volume, and skin rejuvenation and repair.

HA (H-HA & L-HA, 100.00mg), Sodium Succinate (80.50mg), PDRN & PN (6.00mg), RH Collagen (1.50mg), NAD+, and Glutathione & Tranexamic Acid.

It is a ready-to-use pre-filled syringe requiring no mixing with saline. A cycle of 2-3 treatments at 1-month intervals gives effects lasting 4 to 8 months.

Strictly for professional medical use; injected subcutaneously or into the deep dermis by a trained medical professional, never intravascularly.

It is manufactured by Healink Korea.

Juveheal W utilizes ICT (Intracellular Transduction) Technology to deliver whitening agents deeply. Niacinamide and Arbutin work synergistically to inhibit melanin production and treat pigmentation, while fermented extracts and Rice Bran Water reinforce the barrier and brighten overall skin tone.

• Whitening & Tone-Up: Improves dark skin tone and restores a bright complexion.
• Pigmentation Treatment: Helps control melanin to prevent and treat dark spots and melasma.
• Sebum Control: Regulates excessive oil production.
• Barrier Reinforcement: Strengthens skin immunity against external irritants.

Full face, specifically for hyperpigmentation, uneven skin tone, and dullness.

Remove the plastic flip-off cap and aluminum seal; apply using a dropper or syringe.

Avoid direct sunlight (Crucial for whitening products).

• Mild irritation or redness may occur, particularly if used with microneedling.

• Strict sun protection (Sunscreen) is required after treatment to prevent repigmentation.

What is Juveheal W used for?

Juveheal W is a whitening and tone-up ampoule. It improves dark and uneven skin tone, helps treat dark spots and melasma by controlling melanin, regulates sebum, and reinforces the skin barrier.

What are the key ingredients?

The primary active ingredients are Niacinamide 2.0% (a K-FDA functional ingredient) and Arbutin, supported by Lactobacillus/Soybean Ferment Extract, Morus Alba Bark Extract, and Rice Bran Water.

How is it applied?

It is applied topically and can be used with MTS (Microneedling), Derma Pen, or Derma Stamp to improve absorption, typically 1 session per week or daily as a topical serum.

Who should administer Juveheal W?

Juveheal W is for external use only. When combined with microneedling devices such as MTS, Derma Pen, or Derma Stamp, it should be used as a professional practice under professional guidance.

Who manufactures Juveheal W?

Juveheal W is manufactured by J MEDICAL Inter Co., Ltd.

• Lecithin: Natural emulsifier that disrupts fat cell membranes.
• Riboflavin (Vitamin B2): Activates fat metabolism (turns fat into energy) and provides anti-inflammatory benefits.
• Bromelain: Pineapple-derived enzyme for protein breakdown, reducing swelling and inflammation.

• Peptides: Acetyl Hexapeptide-8, Palmitoyl Pentapeptide-4, Palmitoyl Tetrapeptide-7 (Skin firming).
• Antioxidants: Glutathione, Ascorbic Acid, Carnitine, Adenosine.
• Natural Extracts: Centella Asiatica, Chamomilla, Salvia, Scutellaria.

Step 1: Lecithin disrupts fat cells. Step 2: Riboflavin boosts metabolism of released fat. Step 3: Bromelain supports drainage and reduces swelling.

• Dual Action: Fat reduction combined with skin firming to prevent sagging.
• Contouring: Defines facial and body lines by removing stubborn fat.
• Reduced Downtime: Formulated to cause minimal pain and swelling compared to traditional PPC.
• Brightening: Improves skin tone via Riboflavin.

Ready-to-use solution. Can be mixed with small amounts of Lidocaine if needed for comfort.

LipoLume is positioned as a painless, no-swelling alternative to traditional PPC lipolytics. It is ideal for patients who require effective fat reduction but are concerned about downtime or inflammation.

LipoLume is an advanced lipolytic solution for fat reduction and facial and body contouring, targeting areas such as the double chin, jawline, abdomen, love handles, arms, and thighs.

The primary active ingredients are Lecithin (which disrupts fat cell membranes), Riboflavin / Vitamin B2 (which activates fat metabolism), and Bromelain (a pineapple-derived enzyme that reduces swelling and inflammation).

LipoLume is administered by subcutaneous injection, with a treatment cycle of 3–5 sessions spaced 7–10 days apart. It is a ready-to-use solution that can be mixed with small amounts of Lidocaine if needed for comfort.

LipoLume is manufactured by Phace Global Co., Ltd.

A Dual-Action system where HA provides immediate deep hydration and plumping, while PDRN enhances cellular regeneration, DNA synthesis, and tissue repair (anti-inflammatory).

• Deep Hydration & Glow: Instantly hydrated skin with a natural radiant glow.
• Skin Regeneration: Repairs damaged skin barrier and improves overall skin health.
• Texture & Pores: Smoothes skin texture and tightens enlarged pores.
• Anti-Aging: Improves elasticity and firmness while softening fine lines.
• Tone Correction: Brighter, more even skin tone with reduced redness.

Single-use vials. Discard any remaining solution immediately after opening.

Mild swelling, redness, or papules (bumps) at injection sites are common and typically resolve within 24–48 hours.

It is a skin booster for deep hydration, skin regeneration, texture and pore improvement, and anti-aging on the full face, especially dry, dull, or sensitive skin.

PDRN 2% (Salmon DNA) and non-crosslinked Hyaluronic Acid 17mg/mL, working as a dual-action system for hydration and cellular repair.

Instant glow after Session 1, visible pore tightening and elasticity boost by Session 3, and full rejuvenation effects by Session 5 (5 sessions, 2 weeks apart).

For external/professional use only, applied via papule injection or microneedling (MTS) by a qualified practitioner.

It is manufactured by Phace Global Co., Ltd.

High-purity HA attracts water molecules to the dermis, restoring moisture balance immediately while stimulating fibroblasts to promote endogenous collagen synthesis.

• Intensive Moisturizing: Restores dry and dehydrated skin (Hydro-lifting).
• Skin Rejuvenation: Improves overall skin radiance and brightness (Glow effect).
• Texture Improvement: Tightens pores and smoothes fine lines/wrinkles.
• Elasticity Restoration: Enhances skin firmness through collagen stimulation.

Supplied as ready-to-use pre-filled syringes. No mixing required.

Store away from direct sunlight. Do not freeze. Do not use if the package is damaged.

• Mild redness (erythema) or swelling
• Bruising or tenderness at the injection site
• Symptoms usually resolve within 1–3 days

• Avoid heavy makeup for at least 24 hours.
• Avoid saunas, steam rooms, and excessive heat for 1 week.
• Apply sunscreen diligently.

It is used for intensive moisturizing (hydro-lifting), skin rejuvenation and radiance, texture improvement with pore tightening and fine-line smoothing, and elasticity restoration through collagen stimulation.

Its primary active ingredient is Hyaluronic Acid (HA) 15mg/mL (1.5%), buffered with Phosphate Buffered Saline (PBS) pH 7.0.

Visible improvement appears in 1–2 weeks and effects last 3–6 months. A course of 3–4 sessions at 2–3 week intervals is recommended.

It is a medical device for use by licensed practitioners only and should be administered by a qualified professional.

REGENOVUE Aqua Shine is manufactured by NeoGenesis Co., Ltd.