New Arrivals

A synergistic effect of Hydration (HA), Regeneration (PDRN), and Cellular Recharging (NAD+). It acts as a bio-stimulator to activate the skin's natural healing and energy production cycles.

• Deep Hydration & Glow: Provides an instant moisture boost and "water glow" radiance.
• Skin Regeneration: Repairs damaged skin barrier and improves texture.
• Cellular Energy: NAD+ boosts ATP production for enhanced cell renewal.
• Anti-Aging: Softens fine lines, improves elasticity, and tightens pores.

Rejuva Healer S is marketed as a 4th Generation Skin Booster. It eliminates the need to layer multiple products by combining the benefits of HA (1st Gen), PDRN (2nd Gen), and Exosomes (3rd Gen) with the added cellular energy boost of NAD+.

What is Rejuva Healer S used for?

Rejuva Healer S is a 4th generation NAD+ skin booster used for deep hydration and glow, skin regeneration and barrier repair, cellular energy boosting, and anti-aging (softening fine lines, improving elasticity, and tightening pores).

What are the key ingredients?

The primary active ingredients are PDRN 2% (Salmon DNA), Hyaluronic Acid 17mg/mL (non-crosslinked), and NAD+ (Nicotinamide Adenine Dinucleotide).

How long do results last?

Hydration and glow are visible immediately after the 1st session, while texture, pore, and elasticity improvements become prominent after the 3rd session. The standard cycle is 3 to 5 sessions spaced 2–3 weeks apart.

Who should administer Rejuva Healer S?

It is for external/professional use only and is administered by injection (papule or nappage technique) using a 30G × 4mm or 32G needle, and should be administered by a qualified professional.

Who manufactures Rejuva Healer S?

Rejuva Healer S is supplied by Phace Global / Esta Global.

Precise Duplex Mesh Process (PDMP) ensures high viscosity and cohesiveness for long-lasting volume. Supported by LCCP (Low Concentration Cross-linking Process) to minimize residue.

• Body Contouring: Non-surgical augmentation of breasts and buttocks.
• Volume Restoration: Effectively fills deep depressions, hip dips, and corrects asymmetry.
• Shape Correction: Enhances overall body curves and profile.

• Swelling, bruising, redness, and tenderness at the injection site are common.

A eutectic mixture where Lidocaine provides rapid onset surface anesthesia, while Prilocaine penetrates deeper for prolonged effects. The combination allows for higher concentration in oil droplets, enhancing skin penetration compared to single-agent creams.

• Local Anesthesia: Effective numbing of the skin surface to reduce pain and discomfort.
• Prolonged Effect: Provides sustained anesthesia duration sufficient for various procedures.

• Mild paleness (blanching) or redness (erythema) at the site.
• Swelling at the application site.
• Rarely, allergic contact dermatitis.

High-efficiency Nano Mesh (HENM) technology creates a highly cohesive and viscoelastic gel structure. It is optimized to resist migration and maintain shape for long periods.

Optimized for large-area body contouring to provide significant volume and lift.

• Body Contouring: Non-surgical augmentation of buttocks and breasts.
• Volume Restoration: Effectively fills hip dips, corrects asymmetry, and adds projection to flat areas.
• Skin Smoothing: Improves the appearance of skin surface irregularities.

Discard any unused portion after the procedure.

Swelling, bruising, redness, and tenderness are common and may last longer than facial fillers due to the volume injected.

• Wear compression garments if recommended.
• Avoid high heat (sauna) and strenuous exercise for 1–2 weeks.

High-efficiency Nano Mesh (HENM) cross-linking technology creates a strong, cohesive gel structure that resists migration and maintains shape.

Optimized for body contouring to provide substantial volume and lift.

• Body Contouring: Non-surgical augmentation of breast and buttocks.
• Volume Restoration: Fills hollows (e.g., hip dips) and corrects asymmetry.
• Shape Correction: Improves the contour of legs and other body areas.
• Skin Smoothing: Helps correct soft tissue irregularities.

Swelling, bruising, redness, or tenderness at the injection site are common due to the large volume injected.

• Wear compression garments if advised by the practitioner.
• Avoid strenuous exercise and heat (sauna) for at least 1–2 weeks.

• c-PDRN (Cosmetic Polydeoxyribonucleotide): Hydrolyzed DNA from salmon, optimized for skin absorption to repair damaged cells.
• Sodium Hyaluronate (HA): High-quality European hyaluronic acid for intense hydration.

A Double Effect system where HA provides immediate deep hydration and volume support, while c-PDRN penetrates the barrier to stimulate biological regeneration and collagen synthesis.

• Deep Hydration (Hydro-Lifting): Relieves inner skin dryness and provides a radiant "water glow."
• Skin Regeneration: Repairs skin barrier damaged by external irritation or aesthetic procedures (e.g., lasers).
• Texture Improvement: Softens rough skin texture and improves elasticity.
• Soothing: Calms sensitive and tired skin.

Apply to cleansed skin. Highly recommended for use with aesthetic devices such as MTS (Microneedling), Electroporation, or Iontophoresis to enhance penetration.

• Intensive Care: 3–5 sessions at 1–2 week intervals.
• Maintenance: 1 session every 1–2 months.

Mild redness or irritation may occur if used with aggressive MTS, usually subsiding within 24 hours.

What is Rejuvenex Hydro Essence used for?

Rejuvenex Hydro Essence is a hydro-lifting skin booster used for deep hydration and a radiant water glow, skin barrier regeneration (including post-procedure repair), texture improvement, and soothing sensitive or tired skin.

What are the key ingredients?

The primary active ingredients are c-PDRN (Cosmetic Polydeoxyribonucleotide, hydrolyzed salmon DNA) and Sodium Hyaluronate (Hyaluronic Acid).

How is it applied?

It comes in a ready-to-use pre-filled syringe and is applied to cleansed skin. It is highly recommended for use with aesthetic devices such as MTS (Microneedling), Electroporation, or Iontophoresis. Intensive care is 3–5 sessions at 1–2 week intervals.

Who should administer Rejuvenex Hydro Essence?

It is for external (topical) use only. When combined with aesthetic devices such as MTS, Electroporation, or Iontophoresis, it should be used under professional guidance.

Who manufactures Rejuvenex Hydro Essence?

Rejuvenex Hydro Essence is manufactured by PharmaResearch Co., Ltd.

• A2A Receptor Activation: PDRN binds to adenosine A2A receptors to exert anti-inflammatory effects and repair damaged tissues.
• Salvage Pathway: Provides nucleosides (DNA precursors) via the salvage pathway to promote rapid DNA synthesis and cell proliferation.
• Growth Factor Stimulation: Promotes the secretion of VEGF and other growth factors to aid angiogenesis and wound healing.

• Tissue Regeneration: Repairs damaged skin barrier, improves skin thickness, and treats ligament/tendon injuries.
• Pore & Scar Reduction: Diminishes acne scars and tightens pores.
• Rapid Healing: Accelerates wound healing and provides anti-inflammatory support.
• Texture Improvement: Enhances overall skin texture and hydration.

• Medical (Systemic/Local): Intramuscular (IM) or Subcutaneous (SC) injection.
• Aesthetic (Off-label): Intradermal (ID) injection (Mesotherapy) or MTS (Microneedling) application to the face.

• Mild pain, redness, or swelling at the injection site.
• Bruising from the needle insertion.

What is Rejuvenex Forte used for?

Rejuvenex Forte is a high-concentration PDRN solution used for tissue regeneration, pore and scar reduction, rapid wound healing with anti-inflammatory support, and overall skin texture improvement.

What is the key ingredient?

The primary active ingredient is Polydeoxyribonucleotide Sodium (PDRN) at 14.06mg per 2.5mL, derived from salmon DNA.

How long do results last?

Visible skin improvements are often noted after 3–4 sessions, and tissue regeneration effects are cumulative. The typical course is 1 session per week for 3–5 weeks.

Who should administer Rejuvenex Forte?

It is an ethical drug (ETC) administered by injection, including intramuscular or subcutaneous injection and aesthetic intradermal (mesotherapy) or MTS application, and should be administered by a qualified medical professional.

Who manufactures Rejuvenex Forte?

Rejuvenex Forte is manufactured by PharmaResearch Co., Ltd.

Collagenesis-Enabled Solubilized Active and Biodegradable Polymer technology enables PCL to be fully solubilized in water without microparticles, unlike traditional PCL fillers.

GOURI spreads naturally into the surrounding tissue due to its liquid nature and acts as a "Fundamental Anti-Aging" treatment. It biodegrades slowly while stimulating fibroblasts to synthesize new collagen (Neocollagenesis).

• Intense Collagenesis: Stimulation of the skin's natural collagen production.
• Skin Rejuvenation & Lifting: Improvements in skin elasticity, texture, and firmness.
• Wrinkle Reduction: Softens fine lines and deep wrinkles (e.g., crow's feet, marionette lines).
• Natural Volume: Restores volume loss gradually through natural collagen buildup.

Typically requires 2mL (2 syringes) per session for full-face coverage (1mL per side).

Can be safely used for the eye area due to its liquid spreadability.

Mild swelling (edema) is common for 2–3 days post-injection due to the collagenesis inflammatory response. Redness, bruising, or tenderness may occur.

• Avoid heavy makeup for 24 hours.
• Avoid sauna, alcohol, and strenuous exercise for 1 week.

What is GOURI used for?

GOURI is a liquid-type PCL injectable used as a fundamental anti-aging treatment. It stimulates natural collagen production, rejuvenates and lifts skin, softens fine lines and deep wrinkles, and restores natural volume gradually.

What is the key ingredient?

The key ingredient is Polycaprolactone (PCL) at 210mg/mL (21%), delivered as a fully solubilized, microparticle-free liquid using CESABP technology.

How long do results last?

Visual improvements often start within 1–2 weeks, and results typically last 6–12 months as the PCL degrades naturally. The standard cycle is 3 sessions spaced 4 weeks apart, with maintenance of 1–2 sessions every 6–12 months.

Who should administer GOURI?

GOURI is a Class III medical device administered by injection into the deep dermis to subcutaneous layer using a 30G to 35G needle, and should be administered by a qualified medical professional.

Who manufactures GOURI?

GOURI is manufactured by Dexlevo Inc.

Formulated with 95% high-purity HA using advanced BDDE cross-linking technology. The particle size is specifically optimized for large-area body contouring to ensure smooth injection and long-lasting volume.

• Body Contouring: Provides significant volume enhancement for body areas lacking fullness.
• Shape Correction: Effective for correcting body asymmetry or filling hollows such as hip dips.
• Skin Firming: Fills loose skin to improve overall body profile and firmness.

Breast augmentation (non-surgical), Buttock augmentation (hip dips), and other large body depressions.

Ready-to-use 20mL pre-filled syringe. Comes with a Luer-to-Luer connector for ease of use. No mixing required.

Protect from direct sunlight and freezing. Single-use only; do not reuse.

• Swelling, bruising, redness, or tenderness at the injection site are common with large volume injections.

• Wear compression garments if recommended by the practitioner.
• Avoid strenuous exercise and heat (sauna) for 1–2 weeks.
• Massage may be required to smooth the area.

Juveheal W utilizes ICT (Intracellular Transduction) Technology to deliver whitening agents deeply. Niacinamide and Arbutin work synergistically to inhibit melanin production and treat pigmentation, while fermented extracts and Rice Bran Water reinforce the barrier and brighten overall skin tone.

• Whitening & Tone-Up: Improves dark skin tone and restores a bright complexion.
• Pigmentation Treatment: Helps control melanin to prevent and treat dark spots and melasma.
• Sebum Control: Regulates excessive oil production.
• Barrier Reinforcement: Strengthens skin immunity against external irritants.

Full face, specifically for hyperpigmentation, uneven skin tone, and dullness.

Remove the plastic flip-off cap and aluminum seal; apply using a dropper or syringe.

Avoid direct sunlight (Crucial for whitening products).

• Mild irritation or redness may occur, particularly if used with microneedling.

• Strict sun protection (Sunscreen) is required after treatment to prevent repigmentation.

What is Juveheal W used for?

Juveheal W is a whitening and tone-up ampoule. It improves dark and uneven skin tone, helps treat dark spots and melasma by controlling melanin, regulates sebum, and reinforces the skin barrier.

What are the key ingredients?

The primary active ingredients are Niacinamide 2.0% (a K-FDA functional ingredient) and Arbutin, supported by Lactobacillus/Soybean Ferment Extract, Morus Alba Bark Extract, and Rice Bran Water.

How is it applied?

It is applied topically and can be used with MTS (Microneedling), Derma Pen, or Derma Stamp to improve absorption, typically 1 session per week or daily as a topical serum.

Who should administer Juveheal W?

Juveheal W is for external use only. When combined with microneedling devices such as MTS, Derma Pen, or Derma Stamp, it should be used as a professional practice under professional guidance.

Who manufactures Juveheal W?

Juveheal W is manufactured by J MEDICAL Inter Co., Ltd.

Juveheal V uses ICT (Intracellular Transduction) Technology to enhance the penetration of its complex formula into skin cells. It creates an ideal environment for fibroblast activation, regenerating skin components and providing intense hydration for a "Water Glow" effect.

• Radiance & Glow: Instantly improves skin tone and luminosity (Gwangchae).
• Deep Hydration: Restores moisture balance and treats inner dryness with high-dose HA.
• Vitality & Rejuvenation: Revitalizes tired, dull skin and improves overall skin health.
• Barrier Reinforcement: Strengthens the skin's natural defense system.

Full face, specifically for dull, dehydrated, or tired-looking skin.

Remove the flip-off cap and aluminum seal; apply using a dropper or syringe.

Store in a cool, shaded place away from direct sunlight.

• Mild redness or irritation may occur immediately after MTS application but typically subsides within 24 hours.

• Apply a soothing mask and sunscreen.
• Avoid heavy makeup for 24 hours.

What is Juveheal V used for?

Juveheal V is a vitality and radiance ampoule. It improves skin tone and luminosity, provides deep hydration with high-dose HA, revitalizes tired and dull skin, and reinforces the skin barrier for a Water Glow effect.

What are the key ingredients?

The primary active ingredients are High Concentration HA (3,500ppm), Multi-Growth Factors (EGF, FGF, VEGF, IGF), and a Multi-Ingredient Complex of 60+ active ingredients including PDRN.

How is it applied?

It is applied topically and optimized for use with MTS, Derma Pen, or Derma Stamp to facilitate deep absorption. The recommended course is 3 to 5 sessions total, 1 session every 1–2 weeks.

Who should administer Juveheal V?

Juveheal V is for external/cosmetic microneedling use only. For deep absorption it is used with professional devices such as MTS, Derma Pen, or Derma Stamp under professional guidance.

Who manufactures Juveheal V?

Juveheal V is manufactured by J MEDICAL Inter Co., Ltd.

Juveheal B utilizes "ICT Technology" (Intracellular Transduction) to deliver Botulinum Peptide and PDRN deep into skin cells. The peptide mimics botulinum toxin action to lift sagging skin and muscles without toxicity, while PDRN and 3GF repair the barrier and stimulate renewal. Lotus Flower Water replaces purified water for enhanced soothing.

• Lifting & Firming: "Double Lifting" effect targeting sagging skin and muscles via Botulinum peptide.
• Pore Reduction: Tightens pores and improves overall skin texture.
• Barrier Strengthening: PDRN recovers damaged skin barriers.
• Deep Hydration: Provides moisture and a "water glow" effect.

Full face, specifically areas with sagging pores, loss of elasticity, or weakened skin barrier.

Remove the plastic flip-off cap and aluminum seal; apply using a dropper or syringe.

Store in a cool, shaded place away from direct sunlight.

• Temporary redness or irritation may occur if used with MTS/microneedling.

• Apply a soothing mask or regenerative cream after use.

What is Juveheal B used for?

Juveheal B is a lifting and pore tightening ampoule. It provides a double lifting effect on sagging skin and muscles, reduces pores and improves texture, strengthens the skin barrier, and delivers deep hydration.

What are the key ingredients?

The primary active ingredients are Botulinum Peptide (Botulpeptide), PDRN (Salmon DNA), a 3GF Complex, and Hyaluronic Acid, with functional Niacinamide 2.0% and Adenosine 0.04%.

How is it applied?

It is applied topically and optimized for use with MTS (Microneedling), Derma Pen, or Derma Stamp to maximize peptide penetration, recommended 1 session per week.

Who should administer Juveheal B?

Juveheal B is for external (topical) use only. For maximum penetration it is used with professional devices such as MTS, Derma Pen, or Derma Stamp under professional guidance.

Who manufactures Juveheal B?

Juveheal B is manufactured by J MEDICAL Inter Co., Ltd.

Juveheal A features a dual growth factor action where EGF repairs the epidermis and FGF2 stimulates the dermis for improved skin density. Adenosine actively encourages collagen production to correct fine lines, while the Lotus water base provides deep hydration and soothing effects.

• Anti-Aging & Wrinkle Improvement: Specifically targets fine lines and deep wrinkles.
• Skin Vitality & Radiance: Restores a healthy glow to tired or aging skin.
• Elasticity Boost: Improves skin firmness and lifting effect.
• Deep Nutrition: Delivers concentrated nutrients to the skin layers.

Full face (especially areas with fine lines like eyes, forehead, nasolabial folds), Neck.

Ready-to-use liquid ampoule (tear off the plastic cap and aluminum seal to open).

Avoid direct sunlight, high temperature, and high humidity.

• Mild redness or irritation may occur, especially if used with MTS/microneedling (subsides within 1-2 days).

• Use a soothing mask (e.g., cooling sheet mask) after application.
• Apply sun protection.

What is Juveheal A used for?

Juveheal A is an anti-aging and wrinkle care ampoule. It targets fine lines and deep wrinkles, restores skin vitality and radiance, boosts elasticity and firmness, and delivers deep nutrition to the skin.

What are the key ingredients?

The primary active ingredients are Adenosine 0.04%, EGF (Rh-Oligopeptide-1), FGF2 (Rh-Polypeptide-1), and Hydrolyzed Collagen, with a Lotus Flower Water base.

How is it applied?

It is a ready-to-use liquid ampoule applied topically after cleansing. It is highly recommended for use with professional devices such as MTS, Derma Pen, or Electroporation to enhance absorption, typically 1 session per week.

Who should administer Juveheal A?

Juveheal A is for external (topical) use only. For enhanced absorption it is used with professional devices such as MTS, Derma Pen, or Electroporation under professional guidance.

Who manufactures Juveheal A?

Juveheal A is manufactured by J MEDICAL Inter Co., Ltd.

Contains 0.3% Lidocaine for pain reduction. PNET technology enhances elasticity and minimizes BDDE residue.

Glutathione acts as a potent antioxidant, neutralizing free radicals to protect cells from oxidative stress. It conjugates with toxins in the liver for detoxification and inhibits tyrosinase enzymes to shift pigment production from eumelanin to pheomelanin.

• Neuropathy Relief: Prevention and treatment of neurological diseases caused by chemotherapy (e.g., Cisplatin).
• Skin Whitening: Brightens skin tone and reduces pigmentation such as melasma and age spots.
• Anti-Aging: Improves skin elasticity and reduces fine lines via antioxidant action.
• Liver Support: Supports liver detoxification and improves liver function parameters.

Systemic (IV/IM) for whole-body detox and whitening; Liver support.

• Severe Medical Cases: 600–1200mg per day.
• Mild Cases/Maintenance: 300–600mg per day.
• Aesthetic Protocol: Typically 600mg (1 vial) to 1200mg (2 vials) per session, often mixed in 100mL saline.

Dissolve the lyophilized powder with 5mL of Water for Injection (WFI) or Normal Saline (0.9% NaCl). Use immediately after reconstitution as potency degrades rapidly.

Store in a hermetic container to prevent moisture absorption. Keep vials in the original package to protect from light exposure (Light Sensitive).

• Nausea, vomiting, loss of appetite.
• Transient rash.

• 4-Type Bio-Exosomes: 14 Billion particles/mL (Lactobacillus, Panax Ginseng Callus, Cica/Centella, Camellia).
• PDRN (Salmon DNA): 30,000 ppm (3%) – High-purity, Wild Alaskan salmon-derived.

• Collagen Complex: Atelocollagen (98% bio-similarity) + Hydrolyzed Collagen.
• Peptide Complex: 8 Amino Acid Peptides including Acetyl Hexapeptide-8 and Palmitoyl Pentapeptide-4.
• Glutathione: High purity antioxidant for brightening.

Exosomes restore cell-to-cell communication to reprogram aging cells. PDRN corrects cellular memory and accelerates healing. Collagen improves density, and Peptides trigger selective repair.

• Skin Reprogramming: Restores self-healing capacity and cellular communication.
• Intense Glow & Hydration: Instantly revitalizes dry, dull skin.
• Structural Reinforcement: Improves firmness, density, and elasticity (Lifting).
• Soothing & Repair: Calms inflammation and strengthens the skin barrier.

Unlike single-ingredient boosters, ExoLume is a premium "All-in-One" regenerative solution combining Exosomes, PDRN, Collagen, and Peptides to target "Reprogramming" aging skin rather than temporary fixes.

• Unopened: Refer to package expiration.
• Reconstituted: Use within 72 hours (Keep refrigerated).

• Avoid direct sun exposure for 24–48 hours.
• Avoid aggressive exfoliation or chemical treatments for 3–5 days.
• Hydrate well and apply mild moisturizer/sunscreen.
  

What is ExoLume used for?

ExoLume is an advanced bio-exosome skin booster used for skin reprogramming, intense glow and hydration, structural reinforcement (firmness, density, elasticity), and soothing and barrier repair.

What are the key ingredients?

It contains 4-Type Bio-Exosomes (14 Billion particles/mL), PDRN (Salmon DNA) at 30,000 ppm (3%), a Collagen Complex (Atelocollagen + Hydrolyzed Collagen), an 8 Amino Acid Peptide Complex, and Glutathione.

How is the powder prepared before use?

Disinfect both vials, then slowly inject the solvent (Vial 2) into the powder (Vial 1) and swirl gently until dissolved. Use the reconstituted product within 72 hours, keeping it refrigerated.

Who should administer ExoLume?

ExoLume is for professional use only and is applied via mesotherapy (point-by-point/meso-gun) or microneedling (MTS).

Who manufactures ExoLume?

ExoLume is manufactured by Phace Global Co., Ltd.

• Lecithin: Natural emulsifier that disrupts fat cell membranes.
• Riboflavin (Vitamin B2): Activates fat metabolism (turns fat into energy) and provides anti-inflammatory benefits.
• Bromelain: Pineapple-derived enzyme for protein breakdown, reducing swelling and inflammation.

• Peptides: Acetyl Hexapeptide-8, Palmitoyl Pentapeptide-4, Palmitoyl Tetrapeptide-7 (Skin firming).
• Antioxidants: Glutathione, Ascorbic Acid, Carnitine, Adenosine.
• Natural Extracts: Centella Asiatica, Chamomilla, Salvia, Scutellaria.

Step 1: Lecithin disrupts fat cells. Step 2: Riboflavin boosts metabolism of released fat. Step 3: Bromelain supports drainage and reduces swelling.

• Dual Action: Fat reduction combined with skin firming to prevent sagging.
• Contouring: Defines facial and body lines by removing stubborn fat.
• Reduced Downtime: Formulated to cause minimal pain and swelling compared to traditional PPC.
• Brightening: Improves skin tone via Riboflavin.

Ready-to-use solution. Can be mixed with small amounts of Lidocaine if needed for comfort.

LipoLume is positioned as a painless, no-swelling alternative to traditional PPC lipolytics. It is ideal for patients who require effective fat reduction but are concerned about downtime or inflammation.

LipoLume is an advanced lipolytic solution for fat reduction and facial and body contouring, targeting areas such as the double chin, jawline, abdomen, love handles, arms, and thighs.

The primary active ingredients are Lecithin (which disrupts fat cell membranes), Riboflavin / Vitamin B2 (which activates fat metabolism), and Bromelain (a pineapple-derived enzyme that reduces swelling and inflammation).

LipoLume is administered by subcutaneous injection, with a treatment cycle of 3–5 sessions spaced 7–10 days apart. It is a ready-to-use solution that can be mixed with small amounts of Lidocaine if needed for comfort.

LipoLume is manufactured by Phace Global Co., Ltd.

The series creates natural, balanced results with high viscosity and moldability, ensuring the filler holds its shape well within the tissue.