Nutritional and Antioxidant Wellness

• HA (H-HA & L-HA): 100.00mg Total. Deep hydration and metabolic stimulation.
• Sodium Succinate: 80.50mg. Synergizes with HA for intense moisture.
• PDRN & PN: 6.00mg Total (Increased concentration). Accelerates cell renewal and collagen generation.
• RH Collagen: 1.50mg. Directly supplements structural proteins for immediate firming.
• NAD+: Boosts cellular energy (ATP) and repairs DNA.
• Glutathione & Tranexamic Acid: Inhibits melanin synthesis and provides overall skin brightening.

Acts as a complete "Skin Vitalizer". It delivers a comprehensive anti-aging, whitening, and regenerating effect in a single, ready-to-use syringe without leaving any residues in the body.

• Brightening & Lightening: Significantly fades dark spots, pigmentation, and brightens skin tone.
• Anti-Aging & Firming: Stimulates collagen generation, reduces fine wrinkles, and improves skin elasticity.
• Hydration & Volume: Replenishes volume, provides a lifting effect, and enhances skin compliance.
• Rejuvenation & Repair: Rejuvenates under-eye areas, reinforces the skin barrier, and accelerates wound healing.

Cycle: 2-3 treatments at 1-month intervals.
Duration: Volume replenishment and skin rejuvenation effects maintain for 4 to 8 months.

Typically 24–36 months from the manufacturing date (unopened). Single-use only; strictly discard any remaining product after use.

• Side Effects: Mild swelling, redness, bruising, tenderness, or temporary papules at the injection sites.
• Post-Care: Apply sunscreen regularly. Avoid heavy makeup immediately after the procedure, and refrain from exposure to extreme heat (saunas) or strenuous exercise during the initial recovery period.

It is a multi-functional skin booster ("Skin Vitalizer") for brightening, anti-aging and firming, hydration and volume, and skin rejuvenation and repair.

HA (H-HA & L-HA, 100.00mg), Sodium Succinate (80.50mg), PDRN & PN (6.00mg), RH Collagen (1.50mg), NAD+, and Glutathione & Tranexamic Acid.

It is a ready-to-use pre-filled syringe requiring no mixing with saline. A cycle of 2-3 treatments at 1-month intervals gives effects lasting 4 to 8 months.

Strictly for professional medical use; injected subcutaneously or into the deep dermis by a trained medical professional, never intravascularly.

It is manufactured by Healink Korea.

• HA (H-HA & L-HA): 192.00mg Total. Provides deep/surface hydration and blocks free radicals.
• Sodium Succinate: 96.00mg. Reinforces the skin barrier and stimulates metabolic processes.
• PDRN & PN: 5.00mg Total. Stimulates fibroblasts, accelerates cell renewal, and boosts wound healing.
• NAD+: Boosts cellular energy (ATP), promotes DNA repair, and targets senescent cells.
• Glutathione & Tranexamic Acid: Inhibits melanin, fades dark spots, and provides strong brightening effects.

A next-generation multi-functional skin booster combining highly effective ingredients for total anti-aging, whitening, and hydration, designed to leave no residues in the body with FDA proven safety.

• Brightening & Clarity: Reduction of hyperpigmentation, dark spots, and patches.
• Anti-Aging: Reduction of fine wrinkles, smoothing of skin texture, and stimulation of collagen.
• Hydration & Firmness: Volume replenishment and improvement in elasticity.
• Healing & Calm: Reduction of inflammation, calming of redness, and under-eye rejuvenation.

Cycle: 2-3 treatments at 1-month intervals.
Duration: Skin improvement and volume restoration effects are long-lasting, maintaining for 4 to 8 months.

Typically 24-36 months from the manufacturing date (unopened). Use immediately after mixing with saline. Discard any remaining solution after opening (single-use vial).

• Side Effects: Mild swelling, bruising, redness, and tenderness at the injection sites.
• Post-Care: Apply sunscreen regularly. Avoid heavy makeup immediately after the procedure, and refrain from exposure to extreme heat (saunas) or strenuous exercise during the initial recovery period.

It is a next-generation multi-functional skin booster for total anti-aging, brightening (reducing hyperpigmentation and dark spots), hydration, firmness, and skin healing.

HA (H-HA & L-HA, 192.00mg), Sodium Succinate (96.00mg), PDRN & PN (5.00mg), NAD+, and Glutathione & Tranexamic Acid for brightening.

Reconstitute by injecting 1mL of normal saline into the vial and shaking well before use. A cycle of 2-3 treatments at 1-month intervals gives effects lasting 4 to 8 months.

Strictly for professional medical use; deep dermis injections must only be performed by professionals and must not be intravascular.

It is manufactured by Healink Korea.

• Lecithin: Natural emulsifier that disrupts fat cell membranes.
• Riboflavin (Vitamin B2): Activates fat metabolism (turns fat into energy) and provides anti-inflammatory benefits.
• Bromelain: Pineapple-derived enzyme for protein breakdown, reducing swelling and inflammation.

• Peptides: Acetyl Hexapeptide-8, Palmitoyl Pentapeptide-4, Palmitoyl Tetrapeptide-7 (Skin firming).
• Antioxidants: Glutathione, Ascorbic Acid, Carnitine, Adenosine.
• Natural Extracts: Centella Asiatica, Chamomilla, Salvia, Scutellaria.

Step 1: Lecithin disrupts fat cells. Step 2: Riboflavin boosts metabolism of released fat. Step 3: Bromelain supports drainage and reduces swelling.

• Dual Action: Fat reduction combined with skin firming to prevent sagging.
• Contouring: Defines facial and body lines by removing stubborn fat.
• Reduced Downtime: Formulated to cause minimal pain and swelling compared to traditional PPC.
• Brightening: Improves skin tone via Riboflavin.

Ready-to-use solution. Can be mixed with small amounts of Lidocaine if needed for comfort.

LipoLume is positioned as a painless, no-swelling alternative to traditional PPC lipolytics. It is ideal for patients who require effective fat reduction but are concerned about downtime or inflammation.

LipoLume is an advanced lipolytic solution for fat reduction and facial and body contouring, targeting areas such as the double chin, jawline, abdomen, love handles, arms, and thighs.

The primary active ingredients are Lecithin (which disrupts fat cell membranes), Riboflavin / Vitamin B2 (which activates fat metabolism), and Bromelain (a pineapple-derived enzyme that reduces swelling and inflammation).

LipoLume is administered by subcutaneous injection, with a treatment cycle of 3–5 sessions spaced 7–10 days apart. It is a ready-to-use solution that can be mixed with small amounts of Lidocaine if needed for comfort.

LipoLume is manufactured by Phace Global Co., Ltd.

Juveheal V uses ICT (Intracellular Transduction) Technology to enhance the penetration of its complex formula into skin cells. It creates an ideal environment for fibroblast activation, regenerating skin components and providing intense hydration for a "Water Glow" effect.

• Radiance & Glow: Instantly improves skin tone and luminosity (Gwangchae).
• Deep Hydration: Restores moisture balance and treats inner dryness with high-dose HA.
• Vitality & Rejuvenation: Revitalizes tired, dull skin and improves overall skin health.
• Barrier Reinforcement: Strengthens the skin's natural defense system.

Full face, specifically for dull, dehydrated, or tired-looking skin.

Remove the flip-off cap and aluminum seal; apply using a dropper or syringe.

Store in a cool, shaded place away from direct sunlight.

• Mild redness or irritation may occur immediately after MTS application but typically subsides within 24 hours.

• Apply a soothing mask and sunscreen.
• Avoid heavy makeup for 24 hours.

What is Juveheal V used for?

Juveheal V is a vitality and radiance ampoule. It improves skin tone and luminosity, provides deep hydration with high-dose HA, revitalizes tired and dull skin, and reinforces the skin barrier for a Water Glow effect.

What are the key ingredients?

The primary active ingredients are High Concentration HA (3,500ppm), Multi-Growth Factors (EGF, FGF, VEGF, IGF), and a Multi-Ingredient Complex of 60+ active ingredients including PDRN.

How is it applied?

It is applied topically and optimized for use with MTS, Derma Pen, or Derma Stamp to facilitate deep absorption. The recommended course is 3 to 5 sessions total, 1 session every 1–2 weeks.

Who should administer Juveheal V?

Juveheal V is for external/cosmetic microneedling use only. For deep absorption it is used with professional devices such as MTS, Derma Pen, or Derma Stamp under professional guidance.

Who manufactures Juveheal V?

Juveheal V is manufactured by J MEDICAL Inter Co., Ltd.

• Polynucleotide (PN) 1%: Deeply hydrates the skin, regulates sebum secretion, and softens and brightens skin texture.
• Polydeoxyribonucleotide (PDRN) 1%: Promotes blood circulation, stimulates fibroblast growth to activate collagen and elastin synthesis, and repairs damaged tissues through strong anti-inflammatory effects.

Multi-molecular weight Hyaluronic Acid, Peptide complex, Amino acid blend, and Antioxidants.

Formulated with natural ingredients that have a 97% match to human DNA, effectively preventing allergic and toxic reactions while promoting profound cellular regeneration.

• Intensive Hydration: Restores deep moisture balance.
• Skin Regeneration: Overall skin regeneration, elasticity restoration, and tone enhancement.
• Texture & Clarity: Reduction of fine wrinkles, pore reduction, and alleviation of acne scars.
• Pigmentation: Improvement of melasma and hyperpigmentation.

Microneedling Therapy System (MTS), Mesotherapy (dermal injection), micro-deposit, or grid injection techniques. Efficacy is significantly enhanced when combined with laser treatments or sonophoresis.

Single-use vials. Open and use immediately.

Mild swelling, redness, bruising, and tenderness at the injection site.

• Apply sunscreen diligently.
• Avoid direct sunlight, excessive heat (e.g., saunas), and harsh environments for a few days post-treatment.

It is a cellular skin booster for intensive hydration, skin regeneration and elasticity, fine wrinkle and pore reduction, acne scar improvement, and pigmentation correction.

Polynucleotide (PN) 1% and Polydeoxyribonucleotide (PDRN) 1%, supported by multi-molecular weight Hyaluronic Acid, a peptide complex, amino acids, and antioxidants.

There is immediate hydration and improvement upon administration, with deep cellular regeneration effects lasting up to 12 months, over a course of 3 to 6 sessions at 2 to 4-week intervals.

Strictly for professional medical and aesthetic use via MTS, mesotherapy, micro-deposit, or grid injection; intravascular injection is strictly prohibited.

It is manufactured by Cosmoderma, Inc.

• PDRN (Sodium DNA): Extracted from salmon sperm. Highly compatible with human DNA for cell regeneration.
• Human Adipose-derived Stem Cell Extract: Contains nutrients and growth factors (EGF, FGF, HGF) to produce collagen.
• Hyaluronic Acid: Provides deep moisturization.

Functions as a "New Cell Repairing Factor." The ingredients optimize fibroblastic functions in the dermis, creating an ideal ecosystem to boost core cellular functions and activate tissue regeneration.

• Hydration: +132% improvement in moisture levels.
• Skin Elasticity: +103% improvement in firmness.
• Wrinkle Reduction: +72% reduction in wrinkles and fine lines.
• Tone & Texture: Enhances oil/water balance, softens skin, and provides a whitening effect.

1 Session = 5 Procedures over 3 months.
1st to 3rd Procedure: Spaced 1–2 weeks apart.
4th and 5th Procedure: Spaced 1 month apart (for maintenance).

Discard any remaining product within 7 days after opening due to the lack of preservatives. Keep away from direct sunlight.

• Mild redness, swelling, or pinpoint bleeding temporarily associated with the MTS/injection method. (PDRN is highly compatible with human DNA, minimizing immunological side effects).
• Apply soothing masks or regenerative creams post-procedure.
• Strict sun protection is required to prevent pigmentation during the healing phase.

It is a skin booster for total anti-aging and regeneration, improving hydration, elasticity, wrinkles, and tone on dull, sagging, and wrinkled facial skin.

PDRN (Sodium DNA from salmon sperm), Human Adipose-derived Stem Cell Extract with growth factors, and Hyaluronic Acid, within a composite of 43 active ingredients.

One session is 5 procedures over 3 months: the 1st to 3rd spaced 1–2 weeks apart, and the 4th and 5th spaced 1 month apart for maintenance.

For professional use only, applied via Mesotherapy injection or MTS under strict aseptic conditions since the formula is preservative-free.

PLA (Poly-L-Lactic Acid), PN (Polynucleotides), NAD-(NMN), HA (Hyaluronic Acid), Niacinamide, Vitamin B2, and Succinic Acid.

A multi-modal biostimulator that shifts beyond simple filling by delivering instant improvements in skin quality alongside long-lasting structural remodeling and cellular repair.

• Immediate deep hydration and radiant glow.
• Long-term structural volumization and increased dermal density.
• Skin regeneration and enhanced cellular energy.
• Brightening and antioxidant protection.

• Face: Neck wrinkles, forehead lines, frown lines, crow's feet, and marionette lines.
• Eyes: Dark circles, eye wrinkles, and eye bags.
• Body: Wrinkle care, tightening, cellulite, stretch marks, and brightening for areas like hands, knees, elbows, and armpits.

Onset: Immediate hydration and optical smoothness from HA.
Duration: Gradual accumulation of new collagen and elastin over weeks to months, providing long-term volumization.

Typically 24-36 months from the manufacturing date. Once reconstituted, the solution should be used immediately.

• Side Effects: Mild swelling, redness, bruising, or tenderness at the application sites.
• Post-Care: Apply sunscreen diligently. Avoid excessive heat exposure (e.g., saunas) and strenuous physical activity for a few days post-treatment.

It is a multi-modal biostimulator for immediate hydration and glow, long-term structural volumization, skin regeneration, and brightening across the face, eyes, and body.

PLA (Poly-L-Lactic Acid), PN (Polynucleotides), NAD-(NMN), HA (Hyaluronic Acid), Niacinamide, Vitamin B2, and Succinic Acid.

Shake the vial by hand for 1 minute to reconstitute the lyophilized powder; once reconstituted, the solution should be used immediately.

Strictly for professional medical and aesthetic use, administered into the dermal/subcutaneous layer; do not inject intravascularly.