Shop All K-Derma Products

The Regenovue series features a monophasic structure manufactured with advanced BDDE cross-linking technology. It offers high viscoelasticity and cohesiveness for smooth, uniform injection. This specific line maintains an exceptionally low endotoxin level (<0.0015 IU/mg) to minimize the risk of inflammation and adverse reactions.

High-purity HA attracts water molecules to the dermis, restoring moisture balance immediately while stimulating fibroblasts to promote endogenous collagen synthesis.

• Intensive Moisturizing: Restores dry and dehydrated skin (Hydro-lifting).
• Skin Rejuvenation: Improves overall skin radiance and brightness (Glow effect).
• Texture Improvement: Tightens pores and smoothes fine lines/wrinkles.
• Elasticity Restoration: Enhances skin firmness through collagen stimulation.

Supplied as ready-to-use pre-filled syringes. No mixing required.

Store away from direct sunlight. Do not freeze. Do not use if the package is damaged.

• Mild redness (erythema) or swelling
• Bruising or tenderness at the injection site
• Symptoms usually resolve within 1–3 days

• Avoid heavy makeup for at least 24 hours.
• Avoid saunas, steam rooms, and excessive heat for 1 week.
• Apply sunscreen diligently.

It is used for intensive moisturizing (hydro-lifting), skin rejuvenation and radiance, texture improvement with pore tightening and fine-line smoothing, and elasticity restoration through collagen stimulation.

Its primary active ingredient is Hyaluronic Acid (HA) 15mg/mL (1.5%), buffered with Phosphate Buffered Saline (PBS) pH 7.0.

Visible improvement appears in 1–2 weeks and effects last 3–6 months. A course of 3–4 sessions at 2–3 week intervals is recommended.

It is a medical device for use by licensed practitioners only and should be administered by a qualified professional.

REGENOVUE Aqua Shine is manufactured by NeoGenesis Co., Ltd.

The minimal cross-linking technology creates a structure that remains in the dermis longer than non-cross-linked HA. This provides sustained deep hydration, structural renewal of the skin matrix, and bio-stimulation of endogenous collagen.

• Long-lasting Deep Hydration: Improved moisture retention compared to non-cross-linked boosters.
• Skin Lifting & Tightening: Improves skin elasticity and firmness.
• Wrinkle Reduction: Smoothes fine lines, crow's feet, and micro-wrinkles.
• Skin Tone Improvement: Brightens complexion and reduces dullness.
• Pore Refinement: Helps to narrow enlarged pores.

Supplied as ready-to-use pre-filled syringes. Ensure strict aseptic technique during administration.

Store away from direct sunlight and avoid extreme heat. Do not freeze. Single-use only.

• Erythema (redness) or swelling at injection site
• Pain, itching, or bruising
• Symptoms usually resolve within a few days

• Avoid makeup for 12–24 hours.
• Avoid saunas, steam rooms, and intense exercise for 1 week.
• Apply sun protection diligently.

It is used for long-lasting deep hydration, skin lifting and tightening, wrinkle reduction, skin tone improvement, and pore refinement.

Its primary active ingredient is Hyaluronic Acid (HA) 15mg/mL (minimally cross-linked), buffered with Phosphate Buffered Saline (PBS) pH 7.0.

Visible results appear in 1–2 weeks and effects last 6–8 months. A course of 3–4 sessions spaced 3–4 weeks apart is recommended.

It is intended for professional use by licensed medical practitioners only.

REGENOVUE Aqua Shine Plus is manufactured by NeoGenesis Co., Ltd.

• Sodium Hyaluronate (HA): 1.0% (10mg/mL) – Non-crosslinked, high-purity.
• Polynucleotide (PN): 0.5% – DNA-derived agent for tissue regeneration.

• Glutathione: Brightening and antioxidant protection.
• Peptide Complex: Acetyl Hexapeptide-8 (Botox-like), Palmitoyl Tripeptide-5, 4, 7, Collagen Peptides.
• Adenosine: Functional ingredient for wrinkle improvement.

This product combines intense hydration with tissue regeneration. HA draws moisture into the dermis to restore volume, while PN (Salmon DNA) activates self-regeneration power. Simultaneously, Glutathione inhibits melanin for brightening, and the Peptide complex relaxes micro-muscles to smooth fine lines.

• Intense and deep skin hydration (Hydro-lifting effect)
• Skin barrier strengthening and tissue regeneration
• Skin tone improvement and brightening (Radiance/Glow)
• Reduction of fine lines and wrinkles (Anti-aging)
• Pore tightening and texture refinement

The product comes in a ready-to-use pre-filled syringe; no dilution is required.

• Keep away from direct sunlight and heat sources.
• Do not freeze.
• Single-use only; discard any remaining solution after opening.

• Temporary redness or swelling
• Bruising or needle marks at injection sites
• Symptoms usually subside within 1–3 days

• Avoid heavy makeup for 24 hours.
• Avoid saunas, steam rooms, and strenuous exercise for a few days after treatment.

It is used for intense deep skin hydration (hydro-lifting), skin barrier strengthening and tissue regeneration, brightening, reduction of fine lines and wrinkles, and pore tightening with texture refinement.

Its primary active ingredients are Sodium Hyaluronate (HA) 1.0% (10mg/mL, non-crosslinked) and Polynucleotide (PN) 0.5% (salmon DNA-derived).

A course of 3–5 sessions spaced 3–4 weeks apart is recommended, with maintenance every 3–6 months.

It is a medical device intended for professional use only and should be administered by a qualified practitioner.

REJUBEAU Aqua Bomb is manufactured by TRACLE Inc.

Polynucleotide (derived from salmon DNA) regenerates tissue and improves skin density in the dermis, while Hyaluronic Acid provides deep hydration. Glutathione acts as an antioxidant to brighten the skin, and Collagen Peptides stimulate elasticity.

Targeted eye rejuvenation including dark circle reduction and brightening. It provides fine wrinkle correction (Crow's feet), strengthens the skin barrier, and offers deep hydration with improved elasticity.

Under-eye area (Tear troughs), Crow's feet, Neckline, Back of hands, and thin wrinkles on the face.

Ready-to-use pre-filled syringe (No reconstitution required).

Store away from direct sunlight. The product is for single-use only.

• Temporary redness at the injection site
• Swelling or bruising
• Tenderness

• Avoid heavy makeup for a few hours post-injection
• Avoid touching the treated area

It is used for targeted eye rejuvenation, including dark circle reduction, brightening, fine wrinkle correction (Crow's feet), skin barrier strengthening, and deep hydration with improved elasticity.

Its primary active ingredients are Polynucleotide (PN) 1% (derived from salmon DNA) and Sodium Hyaluronate (HA) 0.5%.

It is administered by injection (mesotherapy / intradermal injection) using a 32G or 33G (4mm length) needle, with 3 sessions recommended at 20–30 day intervals.

It is for professional use only and should be administered by a qualified practitioner.

REJUBEAU Eye Deal is manufactured by TRACLE INC.

Polynucleotide (PN), derived from salmon DNA, acts as a tissue regeneration activator. It stimulates the synthesis of collagen and elastin in the dermis (Extra Cellular Matrix restoration) and promotes angiogenesis (formation of new blood vessels) to improve skin density and thickness.

Provides comprehensive skin regeneration and wound healing by accelerating the repair of damaged skin. It improves elasticity and reduces fine lines for anti-aging, smooths skin texture while reducing pore size, and strengthens the skin barrier against environmental stress.

Full Face (General skin rejuvenation), Neck wrinkles, areas with acne scars or enlarged pores, and thin/damaged skin requiring regeneration.

Ready-to-use pre-filled syringe. No dilution required.

Store away from direct sunlight. Do not freeze. Single-use only; discard any remaining solution.

• "Embossing" (small raised bumps) - typically subsides within 24–48 hours
• Mild redness (Erythema), swelling, or bruising
• Mild pain or tenderness

• Avoid makeup for at least 6–12 hours
• Avoid saunas, steam rooms, heavy exercise, and alcohol for 3–7 days
• Apply sunscreen and moisturizer regularly

It provides comprehensive skin regeneration and wound healing, improving elasticity, reducing fine lines for anti-aging, smoothing skin texture while reducing pore size, and strengthening the skin barrier.

Its primary active ingredient is Polynucleotide (PN) 2% (20mg/ml), derived from salmon DNA.

Visible improvements typically appear 1–2 weeks after the first session, with effects lasting 6–12 months. A course of 3 to 4 sessions at 2–3 week intervals is recommended.

It is for professional use only and should be administered by licensed medical practitioners.

REJUBEAU PN Healer is manufactured by TRACLE INC.

Advanced Cross-linked HA creates a stable 3D matrix to lock in moisture and restore elasticity, while Glutathione acts as a powerful antioxidant to brighten skin tone, fade pigmentation, and detoxify tired skin.

• Deep & Long-Lasting Hydration: Locks in moisture for months.
• Radiance & Tone: Brightens skin tone and fades pigmentation (Whitening effect).
• Elasticity & Plumping: Restores firmness and smooths fine lines.
• Detox & Protection: Fights oxidative stress and revitalizes congested skin.

Single-use vials. Discard any remaining solution after opening.

It is a whitening and hydration skin booster that brightens skin tone, fades pigmentation, and delivers deep long-lasting hydration for the face and body.

Cross-linked Hyaluronic Acid (10 mg/mL) and Glutathione (1 mg/mL), combining a moisture-locking HA matrix with antioxidant brightening.

A standard course is 5 sessions total, spaced 2–3 weeks apart.

For external/professional use only, injected by a qualified practitioner using micropapular, nappage, or linear/retrograde techniques.

It is manufactured by Phace Global Co., Ltd.

• High molecular weight HA: 67.5mg
• Low molecular weight HA: 67.5mg
• Polydeoxyribonucleotide (PDRN): 5.0mg
• Polynucleotide (PN): 5.0mg

Cellular Rejuvenation: PDRN and PN (derived from salmon DNA) repair broken collagen and elastin fibers, stimulate fibroblasts to generate new tissue, normalize fibroblast size, and provide anti-inflammatory and wound-healing effects. Dual Hydration: H-HA and L-HA synergistically provide deep and surface hydration, enhance elasticity, and maintain volume.

• Intense Under-Eye Rejuvenation: Specifically targeted treatment for the delicate eye area.
• Deep Hydration & Volume: Replenishes moisture and restores sagging, hollow areas.
• Fine Lines & Wrinkles: Softens and reduces the appearance of wrinkles, including crow's feet.
• Regeneration & Calming: Repairs damaged tissue, improves elasticity, and provides anti-inflammatory healing.

Typically 24–36 months from the manufacturing date (Unopened). Single-use only. Discard any remaining product.

Mild swelling, bruising, redness, tenderness, or temporary papules (small bumps) at the injection sites.

It is a skin booster for intense under-eye rejuvenation, treating tear troughs, crow's feet, under-eye hollows, and eyelids with deep hydration and wrinkle reduction.

High and low molecular weight HA (67.5mg each) plus PDRN (5.0mg) and PN (5.0mg) derived from salmon DNA.

Significant visible improvements, including deep hydration and wrinkle reduction, are typically noted prominently around 9 weeks post-treatment.

Strictly for professional medical use, via direct intradermal injection into the eye area by a trained medical professional; do not inject intravascularly.

A synergistic effect of Hydration (HA), Regeneration (PDRN), and Cellular Recharging (NAD+). It acts as a bio-stimulator to activate the skin's natural healing and energy production cycles.

• Deep Hydration & Glow: Provides an instant moisture boost and "water glow" radiance.
• Skin Regeneration: Repairs damaged skin barrier and improves texture.
• Cellular Energy: NAD+ boosts ATP production for enhanced cell renewal.
• Anti-Aging: Softens fine lines, improves elasticity, and tightens pores.

Rejuva Healer S is marketed as a 4th Generation Skin Booster. It eliminates the need to layer multiple products by combining the benefits of HA (1st Gen), PDRN (2nd Gen), and Exosomes (3rd Gen) with the added cellular energy boost of NAD+.

What is Rejuva Healer S used for?

Rejuva Healer S is a 4th generation NAD+ skin booster used for deep hydration and glow, skin regeneration and barrier repair, cellular energy boosting, and anti-aging (softening fine lines, improving elasticity, and tightening pores).

What are the key ingredients?

The primary active ingredients are PDRN 2% (Salmon DNA), Hyaluronic Acid 17mg/mL (non-crosslinked), and NAD+ (Nicotinamide Adenine Dinucleotide).

How long do results last?

Hydration and glow are visible immediately after the 1st session, while texture, pore, and elasticity improvements become prominent after the 3rd session. The standard cycle is 3 to 5 sessions spaced 2–3 weeks apart.

Who should administer Rejuva Healer S?

It is for external/professional use only and is administered by injection (papule or nappage technique) using a 30G × 4mm or 32G needle, and should be administered by a qualified professional.

Who manufactures Rejuva Healer S?

Rejuva Healer S is supplied by Phace Global / Esta Global.

A Dual-Action system where HA provides immediate deep hydration and plumping, while PDRN enhances cellular regeneration, DNA synthesis, and tissue repair (anti-inflammatory).

• Deep Hydration & Glow: Instantly hydrated skin with a natural radiant glow.
• Skin Regeneration: Repairs damaged skin barrier and improves overall skin health.
• Texture & Pores: Smoothes skin texture and tightens enlarged pores.
• Anti-Aging: Improves elasticity and firmness while softening fine lines.
• Tone Correction: Brighter, more even skin tone with reduced redness.

Single-use vials. Discard any remaining solution immediately after opening.

Mild swelling, redness, or papules (bumps) at injection sites are common and typically resolve within 24–48 hours.

It is a skin booster for deep hydration, skin regeneration, texture and pore improvement, and anti-aging on the full face, especially dry, dull, or sensitive skin.

PDRN 2% (Salmon DNA) and non-crosslinked Hyaluronic Acid 17mg/mL, working as a dual-action system for hydration and cellular repair.

Instant glow after Session 1, visible pore tightening and elasticity boost by Session 3, and full rejuvenation effects by Session 5 (5 sessions, 2 weeks apart).

For external/professional use only, applied via papule injection or microneedling (MTS) by a qualified practitioner.

It is manufactured by Phace Global Co., Ltd.

• PLLA (Poly-L-Lactic Acid): Derived from Alpha Hydroxy Acid, specifically sourced from plant-based materials like corn and sugarcane.
• CMC (Carboxymethylcellulose): Provides immediate volume upon injection.

Dual-Action Formula: CMC provides instant volume and smoothing upon injection. Over time, PLLA gradually breaks down to stimulate natural collagen regeneration (neocollagenesis). PLLA is completely metabolized by the body into carbon dioxide, water, and simple sugars, leaving no residue behind.

• Immediate plumping and smoothing of the skin via CMC.
• Long-term skin rejuvenation and progressive collagen regeneration via PLLA.
• Restoration of facial and body structure with improved skin elasticity and firmness.

Immediate visible volume from CMC. Natural collagen generation develops over several months, with results lasting up to 2 years.

Typically 24-36 months from the manufacturing date. Single-use vial only; discard any remaining product immediately after use.

• Avoid using the sauna, swimming pool, or gym for at least 7 days after treatment.
• Avoid vigorous facial treatments or massages for 2 weeks post-injection (except for the prescribed 5-5-5 gentle massage).
• Maintain a healthy lifestyle to support optimal collagen production.

It is a collagen biostimulator for immediate plumping and long-term skin rejuvenation, restoring facial and body structure with improved elasticity and firmness.

PLLA (Poly-L-Lactic Acid), a plant-based collagen stimulator sourced from corn and sugarcane, combined with CMC (Carboxymethylcellulose) for immediate volume.

Rejuva Lume is a lyophilized powder and must be reconstituted before use: add Sterile Water for Injection and agitate until a uniform, lump-free suspension forms, following the dilution volume and hydration time in the manufacturer's Instructions for Use.

There is immediate visible volume from CMC, while natural collagen generation develops over several months, with results lasting up to 2 years.

Strictly for professional medical use, injected subcutaneously or into the deep dermis with an 18G cannula or 25-27G needle; do not inject intravascularly.

It is manufactured by Phace Global Co., Ltd.

• A2A Receptor Activation: PDRN binds to adenosine A2A receptors to exert anti-inflammatory effects and repair damaged tissues.
• Salvage Pathway: Provides nucleosides (DNA precursors) via the salvage pathway to promote rapid DNA synthesis and cell proliferation.
• Growth Factor Stimulation: Promotes the secretion of VEGF and other growth factors to aid angiogenesis and wound healing.

• Tissue Regeneration: Repairs damaged skin barrier, improves skin thickness, and treats ligament/tendon injuries.
• Pore & Scar Reduction: Diminishes acne scars and tightens pores.
• Rapid Healing: Accelerates wound healing and provides anti-inflammatory support.
• Texture Improvement: Enhances overall skin texture and hydration.

• Medical (Systemic/Local): Intramuscular (IM) or Subcutaneous (SC) injection.
• Aesthetic (Off-label): Intradermal (ID) injection (Mesotherapy) or MTS (Microneedling) application to the face.

• Mild pain, redness, or swelling at the injection site.
• Bruising from the needle insertion.

What is Rejuvenex Forte used for?

Rejuvenex Forte is a high-concentration PDRN solution used for tissue regeneration, pore and scar reduction, rapid wound healing with anti-inflammatory support, and overall skin texture improvement.

What is the key ingredient?

The primary active ingredient is Polydeoxyribonucleotide Sodium (PDRN) at 14.06mg per 2.5mL, derived from salmon DNA.

How long do results last?

Visible skin improvements are often noted after 3–4 sessions, and tissue regeneration effects are cumulative. The typical course is 1 session per week for 3–5 weeks.

Who should administer Rejuvenex Forte?

It is an ethical drug (ETC) administered by injection, including intramuscular or subcutaneous injection and aesthetic intradermal (mesotherapy) or MTS application, and should be administered by a qualified medical professional.

Who manufactures Rejuvenex Forte?

Rejuvenex Forte is manufactured by PharmaResearch Co., Ltd.

• c-PDRN (Cosmetic Polydeoxyribonucleotide): Hydrolyzed DNA from salmon, optimized for skin absorption to repair damaged cells.
• Sodium Hyaluronate (HA): High-quality European hyaluronic acid for intense hydration.

A Double Effect system where HA provides immediate deep hydration and volume support, while c-PDRN penetrates the barrier to stimulate biological regeneration and collagen synthesis.

• Deep Hydration (Hydro-Lifting): Relieves inner skin dryness and provides a radiant "water glow."
• Skin Regeneration: Repairs skin barrier damaged by external irritation or aesthetic procedures (e.g., lasers).
• Texture Improvement: Softens rough skin texture and improves elasticity.
• Soothing: Calms sensitive and tired skin.

Apply to cleansed skin. Highly recommended for use with aesthetic devices such as MTS (Microneedling), Electroporation, or Iontophoresis to enhance penetration.

• Intensive Care: 3–5 sessions at 1–2 week intervals.
• Maintenance: 1 session every 1–2 months.

Mild redness or irritation may occur if used with aggressive MTS, usually subsiding within 24 hours.

What is Rejuvenex Hydro Essence used for?

Rejuvenex Hydro Essence is a hydro-lifting skin booster used for deep hydration and a radiant water glow, skin barrier regeneration (including post-procedure repair), texture improvement, and soothing sensitive or tired skin.

What are the key ingredients?

The primary active ingredients are c-PDRN (Cosmetic Polydeoxyribonucleotide, hydrolyzed salmon DNA) and Sodium Hyaluronate (Hyaluronic Acid).

How is it applied?

It comes in a ready-to-use pre-filled syringe and is applied to cleansed skin. It is highly recommended for use with aesthetic devices such as MTS (Microneedling), Electroporation, or Iontophoresis. Intensive care is 3–5 sessions at 1–2 week intervals.

Who should administer Rejuvenex Hydro Essence?

It is for external (topical) use only. When combined with aesthetic devices such as MTS, Electroporation, or Iontophoresis, it should be used under professional guidance.

Who manufactures Rejuvenex Hydro Essence?

Rejuvenex Hydro Essence is manufactured by PharmaResearch Co., Ltd.