Anti-aging and Wrinkle Care
Turn back the clock with our anti-aging and wrinkle care collection. Our K-Derma products are expertly formulated to smooth fine lines, firm sagging skin, and restore a more youthful and radiant look.
122 products
122 products
Sort by:
SYNERFILL Skin Booster (5mL × 1 Vial)
$66.00
Unit price perSYNERFILL Skin Booster (5mL × 1 Vial)
$66.00
Unit price perSYNERFILL Skin Booster
HA + PDRN + PN Complex
- H-HA (High molecular weight HA): 67.5mg
- L-HA (Low molecular weight HA): 67.5mg
- PDRN (Polydeoxyribonucleotide): 5mg
- PN (Polynucleotide): 5mg
H-HA & L-HA provide intense moisture, enhance skin elasticity, and maintain long-lasting volume. PDRN & PN promote cell regeneration, offer anti-inflammatory effects, enhance wound healing, and repair broken collagen and elastin fibers.
- Hydration & Volume: Intense moisturizing and long-lasting volume support.
- Rejuvenation: Wrinkle reduction, collagen & elastin regeneration.
- Healing & Tone: Anti-inflammatory wound healing, whitening, and scar/acne improvement.
| Method | Target Layer | Depth & Tool | Amount per Point |
|---|---|---|---|
| Dermis Injection | Dermis (17 points per side) | 2mm Depth (34G x 2mm needle) | 0.25cc – 0.3cc |
| BAP Point Injection | Subcutaneous fat | 4mm – 6mm Depth | 0.4cc – 0.5cc |
Cycle: 3 treatments at 2-week intervals.
Onset: Rapid onset with PDRN/PN action visible in 1-2 weeks.
Duration: Overall effect lasts 4 to 8 months.
| Product Line | Core Ingredients | Primary Focus |
|---|---|---|
| SYNERFILL Skin Booster | PDRN + PN + HA Complex | Skin texture, deep hydration, wound healing, overall cell regeneration. |
| SYNERFILL Face & Body | PLLA + HA Hybrid | Deep volume replenishment and structural lifting. |
Single-use vial. Discard any remaining solution after opening.
- Common Effects: Mild swelling, redness, bruising, tenderness, or temporary papules (bumps) at injection sites.
- Post-Care: Avoid heavy makeup for 24 hours. Avoid extreme heat (saunas, hot baths) and strenuous exercise for a few days. Apply sunscreen regularly.
It is a skin booster for deep hydration, skin texture improvement, wrinkle reduction, wound healing, and overall cell regeneration across the full face, neck, and back of hand.
A complex of H-HA and L-HA (67.5mg each) plus PDRN (5mg) and PN (5mg) per 5mL, combining HA hydration with PDRN/PN cell regeneration.
The overall effect lasts 4 to 8 months, with PDRN/PN action visible in 1-2 weeks, following a cycle of 3 treatments at 2-week intervals.
It is strictly for professional medical use and must not be injected intravascularly.
It is manufactured by Healink Korea.
REGENOVUE (FINE / DEEP / SUB-Q) (1mL × 1 Syringe)
$42.00
Unit price perREGENOVUE (FINE / DEEP / SUB-Q) (1mL × 1 Syringe)
$42.00
Unit price per
REGENOVUE Series
100% Cross-Linked Hyaluronic Acid Dermal Fillers (Without Lidocaine)
The Regenovue series features a monophasic structure manufactured with advanced BDDE cross-linking technology. It offers high viscoelasticity and cohesiveness for smooth, uniform injection. This specific line maintains an exceptionally low endotoxin level (<0.0015 IU/mg) to minimize the risk of inflammation and adverse reactions.
| Feature | Regenovue FINE | Regenovue Deep | Regenovue Sub-Q |
|---|---|---|---|
| Formulation Type | Low Viscosity Gel (Soft) | Medium Viscosity Gel (Medium) | High Viscosity Gel (Hard) |
| HA Concentration | 24mg/ml HA (No Lidocaine) | 24mg/ml HA (No Lidocaine) | 24mg/ml HA (No Lidocaine) |
| Target Depth | Superficial Dermis | Mid to Deep Dermis | Deep Dermis / Subcutaneous |
Regenovue FINE
Low Viscosity Gel
Injected into the superficial layers of the dermis to fill fine tissue depressions and physically smooth the skin surface.
Correction of fine lines and superficial wrinkles, skin texture refinement, and delicate volume restoration.
Crow's feet (periorbital lines), perioral lines, glabellar lines, and shallow forehead lines.
Supplied as a sterile, pre-filled syringe. Typically administered using a 30G needle.
- Temporary erythema
- Swelling and bruising
- Mild pain at the injection site
Regenovue Deep
Medium Viscosity Gel
Injected into the mid-to-deep dermis to elevate deeper skin depressions and restore lost volume. Features a balanced structure combining softness and elasticity with a dense cross-linking matrix.
Correction of moderate to deep wrinkles, lip augmentation, and natural volume enhancement of facial contours.
Nasolabial folds, marionette lines, deep forehead wrinkles, lips, and cheeks.
Supplied as a sterile, pre-filled syringe. Typically administered using a 27G needle.
- Temporary swelling and bruising
- Tenderness and redness at the injection site
Regenovue Sub-Q
High Viscosity Gel
Forms a sturdy support structure in the deep dermis or subcutaneous layer to induce distinct three-dimensional projection and structural lifting. Possesses the highest degree of cross-linking and viscoelasticity in the series.
Facial contouring, restoration of severe volume deficits, structural shaping, and correction of very deep folds.
Chin, nose bridge, jawline, cheekbones, and severe nasolabial folds.
Due to the high viscosity and large particle size, an appropriately sized needle or cannula (typically 25G or 27G) should be used.
- Firmness at the injection site
- Prolonged swelling and bruising
- Localized tenderness
What is REGENOVUE used for?
The REGENOVUE series is used to correct wrinkles, refine skin texture, and restore facial volume. FINE corrects fine lines and superficial wrinkles (crow's feet, perioral lines, glabellar lines); Deep corrects moderate to deep wrinkles (nasolabial folds, marionette lines) and augments lips; and Sub-Q provides facial contouring and structural shaping of the chin, nose bridge, jawline, and cheekbones.
What is REGENOVUE made of?
Every version contains 100% cross-linked Hyaluronic Acid at 24mg/ml, without lidocaine. It features a monophasic structure manufactured with advanced BDDE cross-linking technology and maintains an exceptionally low endotoxin level (less than 0.0015 IU/mg).
How long do results from REGENOVUE last?
Results from all three versions (FINE, Deep, Sub-Q) typically last approximately 8 to 12 months, varying depending on individual metabolism and injection site.
Who should administer REGENOVUE?
REGENOVUE is a professional injectable administered into the appropriate skin layer (superficial dermis, mid to deep dermis, or subcutaneous/supraperiosteal) depending on the version. Intravascular injection is strictly prohibited, and strict aspiration is required in high-risk areas like the nose and glabella. It is contraindicated in patients with HA hypersensitivity, pregnant or breastfeeding women, severe inflammatory skin conditions, bleeding disorders, or a keloid tendency.
Who manufactures REGENOVUE?
REGENOVUE is manufactured by NeoGenesis Co., Ltd.
Sunnyfill PN (2mL × 1 Syringe)
$39.00
Unit price perSunnyfill PN (2mL × 1 Syringe)
$39.00
Unit price per
SUNNYFILL PN
Polynucleotide Gel Injection
- Barrier Formation: PN forms a physical barrier on the skin to block environmental stressors and maintain optimal moisture levels.
- Fibroblast Activation: Activates fibroblasts to stimulate collagen synthesis, restoring skin structure and elasticity from within.
- Anti-inflammatory Action: Provides anti-inflammatory support to improve the overall skin environment and support tissue recovery.
- Restores oil-water balance and reduces sebum secretion for improved skin texture
- Replenishes elastic fibers including collagen, enhancing the skin's self-healing capacity
- Promotes wound and scar healing
- Effectively improves dryness, pigmentation, wrinkles, and skin sagging
Provides an extended maintenance and retention period attributed to the long DNA chain structure of the PN, which slows degradation and prolongs efficacy in the skin.
CURENEX Sculp (360mg × 1 Vial)
$96.00
Unit price perCURENEX Sculp (360mg × 1 Vial)
$96.00
Unit price perCURENEX Sculp
PLLA Collagen Biostimulator
PLLA microparticles stimulate the body's natural collagen production (neocollagenesis) by activating fibroblasts. As the PLLA is gradually absorbed and metabolized by the body, the newly formed collagen restores lost facial volume and improves overall skin elasticity.
Composed of a biodegradable and biocompatible synthetic polymer designed to act as a biostimulator rather than a traditional volumizing filler.
- Gradual and natural-looking volume restoration.
- Deep wrinkle correction.
- Long-term collagen regeneration.
- Improvement of overall skin tone and texture.
Facial contouring, deep wrinkles (e.g., nasolabial folds, marionette lines), sunken cheeks, temples, and jawline.
Results appear gradually over 4 to 6 weeks as new collagen is synthesized. The volumizing and rejuvenating effects are long-lasting, typically persisting for 18 to 24 months.
Store in a cool, dry place away from direct sunlight. Once reconstituted, the product should be used within the recommended timeframe according to standard PLLA protocols.
Patients are typically advised to massage the treated area gently for 5 minutes, 5 times a day, for 5 days to ensure even product distribution and prevent the formation of subcutaneous nodules.
Mild swelling, bruising, redness, and tenderness at the injection sites.
It is a PLLA collagen biostimulator for gradual, natural-looking volume restoration, deep wrinkle correction, and long-term collagen regeneration for facial contouring.
Poly-L-Lactic Acid (PLLA), a biodegradable, biocompatible synthetic polymer that stimulates the body's natural collagen production (neocollagenesis).
It requires proper reconstitution with Sterile Water for Injection (SWFI) prior to the procedure to ensure an even suspension of PLLA particles.
Strictly for professional medical use, via deep dermal or subcutaneous injection; do not inject intravascularly or into the superficial epidermis.
Pine Bottle OMNI (100mg x 1 Vial)
$78.00
Unit price perPine Bottle OMNI (100mg x 1 Vial)
$78.00
Unit price per
Pine Bottle OMNI
Multi-Modal Biostimulator
PLA (Poly-L-Lactic Acid), PN (Polynucleotides), NAD-(NMN), HA (Hyaluronic Acid), Niacinamide, Vitamin B2, and Succinic Acid.
| Component | Function & Action |
|---|---|
| PN | Signals via the adenosine A2A receptor to reduce inflammatory cytokines, improve microcirculation, and supply nucleotide substrates for DNA/RNA synthesis. |
| NAD (NMN) | Sustains ATP generation in mitochondria to empower collagen synthesis and repair, acting as a substrate for genomic maintenance. |
| PLA | Microparticulate PLA triggers a controlled biostimulatory response activating fibroblasts, driving neocollagenesis (Types I/III) for natural structural volume. |
| HA | Highly hydrophilic agent that binds and retains water within the dermis for immediate hydration and optical smoothness. |
| Niacinamide | Inhibits melanosome transfer for more even skin tone (brightening) and strengthens the skin barrier. |
A multi-modal biostimulator that shifts beyond simple filling by delivering instant improvements in skin quality alongside long-lasting structural remodeling and cellular repair.
- Immediate deep hydration and radiant glow.
- Long-term structural volumization and increased dermal density.
- Skin regeneration and enhanced cellular energy.
- Brightening and antioxidant protection.
- Face: Neck wrinkles, forehead lines, frown lines, crow's feet, and marionette lines.
- Eyes: Dark circles, eye wrinkles, and eye bags.
- Body: Wrinkle care, tightening, cellulite, stretch marks, and brightening for areas like hands, knees, elbows, and armpits.
Onset: Immediate hydration and optical smoothness from HA.
Duration: Gradual accumulation of new collagen and elastin over weeks to months, providing long-term volumization.
Shake the vial by hand for 1 minute to successfully reconstitute the powder. It is then ready to use.
Typically 24-36 months from the manufacturing date. Once reconstituted, the solution should be used immediately.
- Side Effects: Mild swelling, redness, bruising, or tenderness at the application sites.
- Post-Care: Apply sunscreen diligently. Avoid excessive heat exposure (e.g., saunas) and strenuous physical activity for a few days post-treatment.
It is a multi-modal biostimulator for immediate hydration and glow, long-term structural volumization, skin regeneration, and brightening across the face, eyes, and body.
PLA (Poly-L-Lactic Acid), PN (Polynucleotides), NAD-(NMN), HA (Hyaluronic Acid), Niacinamide, Vitamin B2, and Succinic Acid.
Shake the vial by hand for 1 minute to reconstitute the lyophilized powder; once reconstituted, the solution should be used immediately.
Strictly for professional medical and aesthetic use, administered into the dermal/subcutaneous layer; do not inject intravascularly.
Lipotocin Inj (12mL x 10 Amps)
$52.00
Unit price perLipotocin Inj (12mL x 10 Amps)
$52.00
Unit price per
Lipotocin Inj.
High Dose Cinderella Injection
Thioctic Acid acts as an antioxidant master, regenerating Vitamin C, E, and Glutathione while scavenging free radicals. It also increases mitochondrial energy expenditure to aid in lipolysis (fat breakdown) and prevents protein glycation to reduce tissue aging.
- Intensive Anti-Aging: Powerful antioxidant protection against cellular damage.
- Skin Brightening: Reduces dullness and improves skin texture ("Baby Face Injection").
- Body Slimming: Boosts metabolism to aid in weight loss and reduce edema.
- Fatigue Recovery: Improves energy levels and exhaustion.
- Diabetic Neuropathy Relief: Relieves sensory abnormalities.
| Product Version | Thioctic Acid Content | Primary Strategy |
|---|---|---|
| Lipotocin (High Dose) | 300mg / 12mL | Intensive Slimming & Metabolic Boost |
| Standard Cindella (Low Dose) | 25mg / 5mL | Cocktail Maintenance (Mixed with Vit C/Glutathione) |
- Nausea, vomiting, or gastrointestinal discomfort (rare with slow drip).
- Skin rash or itching at the injection site.
Avoid heavy alcohol consumption as it interferes with metabolic effects.
HYALDEW (FINE / MID / ALL)
$36.00
Unit price perHYALDEW (FINE / MID / ALL)
$36.00
Unit price perHYALDEW
FINE • MID • ALL
Why KSTATION
Advanced Formulation Technology
- Cross-Linked Hyaluronic Acid (HA)
-
20mg/mlPremium quality hyaluronic acid sourced from non-animal biofermentation, processed through patented Multi-staged Cross-Linking (MCL) technology creating ultrafine HA microbeads within a stable gel structure for enhanced viscosity and extended duration
- Lidocaine HCl
-
0.3%Integrated local anesthetic for enhanced patient comfort during injection procedures, ensuring a more pleasant treatment experience
- Multi-staged Cross-Linking (MCL) Technology
-
Patented ProcessUnique 3-staged processing technique that creates highly cohesive microbead gel structure, providing superior viscosity control and extended aesthetic effect duration up to 12 months
Patented MCL Technology Advantage
HYALDEW Series Comparison
| Product Name | Viscosity | Treatment Area | Injection Layer | Needle Gauge |
|---|---|---|---|---|
| HyalDew Fine | Low | Fine wrinkles, crow's feet, perioral lines | Upper Dermis | 30G 13mm |
| HyalDew Mid | Medium | Moderate wrinkles, lips, oral commissures | Middle Dermis | 27G 13mm |
| HyalDew All | High | Deep folds, facial contouring | Deep Dermis/Subcutis | 25G 13mm |
Individual Product Profiles
HyalDew Fine Superficial
Areas: Periorbital (crow's feet), perioral lines, glabellar region, forehead lines
Duration: Up to 12 months aesthetic effect
Key Feature: Smallest particle size for delicate areas and subtle corrections
HyalDew Mid Versatile
Areas: Glabellar lines, oral commissures, nasolabial folds, lip augmentation
Duration: Up to 12 months aesthetic effect
Key Feature: Medium particle size and viscosity for natural-looking results across various facial areas
HyalDew All Volume
Areas: Forehead, cheeks, nose bridge, chin, deep nasolabial folds
Duration: Up to 12 months aesthetic effect
Key Feature: High viscosity and larger particle size for excellent volume and moldability
Key Therapeutic Advantages
Comprehensive Facial Rejuvenation
Enhanced Comfort Experience
Extended Duration Results
Superior Moldability & Cohesion
- Improved skin hydration, elasticity, and firmness across all treatment areas
- Volumetric enhancement and precise facial contouring capabilities
- Biocompatible formulation with non-animal hyaluronic acid source
- Professional-grade 1.0ml prefilled syringe with included needles
Storage Requirements: Store at temperature between 1°C to 30°C. Do not freeze or expose to excessive heat.
Usage Guidelines: Single-use only. Discard immediately after use. Do not reuse or resterilize.
Safety Precautions: Do not apply force or pressure to the product. Keep away from direct sunlight. Do not inject into blood vessels.
Professional Use Only: This product is intended for use by qualified medical professionals only.
Product Specifications
Manufacturing Standards
Volume: 1.0ml prefilled syringe per pack
Formulation: Syringe type with sterile packaging
Cross-linking Method: Patented Multi-staged Cross-Linking (MCL) technology
Product Characteristics
HA Source: Non-animal biofermentation
Needle Inclusion: Two needles included (gauge varies by version)
Shelf Life: Check individual product labeling for expiration dates
Treatment Recommendations
Patient Assessment
Product Selection
Injection Technique
Post-Treatment Care
Recommended Treatment Zones
Fine Lines & Surface Corrections
• Periorbital area (crow's feet around eyes)
• Perioral lines (smoker's lines around mouth)
• Glabellar region (between eyebrows)
• Forehead horizontal lines
• Skin texture improvement
Moderate Enhancement
• Glabellar lines (frown lines)
• Oral commissures (corner of mouth)
• Moderate nasolabial folds
• Lip augmentation and definition
• Marionette lines
Volume & Contouring
• Forehead volume enhancement
• Cheek augmentation and lifting
• Nose bridge contouring
• Chin projection and definition
• Deep nasolabial folds correction
Which HYALDEW is Right for Your Patient?
Decision Framework
- For Natural Fine Line Improvement: Choose HyalDew Fine for subtle, natural-looking corrections in delicate areas
- For Moderate Wrinkle Correction: Select HyalDew Mid for versatile treatment of moderate lines and lip enhancement
- For Deep Fold Correction & Contouring: Use HyalDew All for significant volume enhancement and structural improvements
- For Combination Treatments: Multiple variants can be used in the same patient for comprehensive facial rejuvenation
Manufacturing Excellence
BioPlus Quality Commitment
Patented MCL Technology
Frequently Asked Questions
- What is HYALDEW used for?
- HYALDEW is a cross-linked hyaluronic acid dermal filler used for comprehensive facial rejuvenation, from fine lines and superficial wrinkles (Fine) to moderate wrinkles and lip enhancement (Mid) to deep folds, volume enhancement, and facial contouring (All), across areas such as crow's feet, perioral and glabellar lines, nasolabial folds, lips, cheeks, nose bridge, and chin.
- What is HYALDEW made of?
- HYALDEW is made of cross-linked hyaluronic acid at 20mg/ml sourced from non-animal biofermentation with 0.3% lidocaine HCl, produced using patented Multi-staged Cross-Linking (MCL) technology that creates a cohesive microbead gel structure.
- How long do results from HYALDEW last?
- Results from HYALDEW last up to 12 months of aesthetic effect across all variants (Fine, Mid, and All), depending on the treatment area and individual factors.
- Who should administer HYALDEW?
- HYALDEW is intended for use by qualified medical professionals only. It is a single-use product, must not be injected into blood vessels, and should not be reused or resterilized.
- Who manufactures HYALDEW?
- HYALDEW is manufactured by BioPlus Co., Ltd., South Korea.
HYALMASS 50mg (2mL × 1 Syringe)
$34.00
Unit price perHYALMASS 50mg (2mL × 1 Syringe)
$34.00
Unit price perHYALMASS 50mg
2mL x 1 Pre-filled Syringe
- Professional medical qualification required for administration
- Follow local regulatory guidelines and requirements
- Maintain sterile injection protocols throughout procedure
- Assess patient suitability before treatment
- Monitor for adverse reactions during and after treatment
- Store product according to specified temperature conditions
- Use single-use syringe for each patient
- Provide appropriate post-treatment care instructions
Concentration: 50mg high molecular hyaluronic acid
Packaging: Single pre-filled sterile syringe
Storage Temperature: 1°C to 30°C
Application Method: Professional injection
Treatment Areas: Face, neck, hands
Sunnyfill PLA (200mg × 1 Vial)
$68.00
Unit price perSunnyfill PLA (200mg × 1 Vial)
$68.00
Unit price per
SUNNYFILL PLA
Poly D,L-Lactide Acid Collagen Stimulator
-
1 Immediate (CMC Phase): Immediately after injection, the dermis layer is filled with CMC gel, providing instant volume and supporting the surrounding tissue.
-
2 Long-term (PLA Phase): As the CMC gel is gradually absorbed and dissolved, the PLA microspheres remain in place and stimulate cells to produce new collagen — delivering natural wrinkle improvement from the inside out.
- HMT (Homologous Microsphere Technology): Creates perfectly spherical and uniform PLA particles precisely sized at 30–50 µm for consistent, predictable results.
- High Molecular Weight: 190,000–250,000 Da — ensures structural integrity and sustained collagen stimulation over time.
- Eco-Friendly & Biodegradable: No BDDE residue. PLA material fully degrades within 1–2 years.
- Acts as a natural collagen stimulator to dramatically restore volume
- Improves deep wrinkles and gradually rejuvenates overall skin texture
- Delivers dual-phase action: immediate volumizing followed by sustained collagen regeneration
-
1 Add 1.4 mL of WFI (Water For Injection) to the vial.
-
2 Allow to dissolve at room temperature. Standard dissolution time is approximately 1 hour (full dissolution confirmed within 60–90 minutes).
-
3 Confirm beads are completely dissolved before proceeding to injection to ensure even particle suspension.
- Do not freeze.
- Must be properly reconstituted prior to injection to ensure even particle suspension.
Sunnyfill PN Booster (3mL × 10 Vials)
$158.00
Unit price perSunnyfill PN Booster (3mL × 10 Vials)
$158.00
Unit price per
SUNNYFILL PN BOOSTER
Premium Polynucleotide Boosting Solution
- PN (Polynucleotide): Fills in and strengthens thin, stretched skin while actively regenerating the skin barrier at a cellular level.
- HA (Hyaluronic Acid, 1.4M Da): Protects the skin barrier and provides intensive, long-lasting moisture retention.
- MGF Multi Growth Factor Complex: A biomimetic blend of 40 active ingredients optimized for skin cell regeneration, tissue repair, and metabolic support.
- Skin moisturization and deep hydration
- Texture improvement and pore tightening
- Elasticity improvement and anti-aging effects
- Skin regeneration and wound healing support
- Sebum reduction for balanced skin condition
| Phase | Frequency |
|---|---|
| Initial Phase | Twice a month (Every 15 days) |
| Recovery Phase | Twice a month |
| Maintenance Phase | Once every 2 – 6 months |
-
1 Prepare the skin for absorption using the appropriate aesthetic device (Fraxel Laser / EL / Sonophor).
-
2 Apply PN BOOSTER evenly to the treatment area.
-
3 Apply REVS Gel Mask and leave on for 10–15 minutes.
-
4 Finish by applying REVS Repairing Serum to lock in active ingredients.
- Protect from direct sunlight.
- Do not freeze.
-
1 Apply REVS Hydrating Gel Mask for 10–15 minutes to provide immediate soothing relief to irritated skin.
-
2 Follow with REVS Repairing Serum to hold active ingredients onto the skin and support recovery.
Wellsfill (Fine / Deep / Volume)
$27.00
Unit price perWellsfill (Fine / Deep / Volume)
$27.00
Unit price per
Wellsfil Series
South Korean Hyaluronic Acid Dermal Fillers utilizing BDDE cross-linking technology.
The Wellsfil series features a monophasic gel structure designed to provide smooth injection, uniform tissue integration, and structural stability. The series includes 0.3% lidocaine to minimize patient discomfort during the procedure. It is available in three viscoelastic variants to target different depths of the skin and address various aesthetic concerns, from superficial wrinkles to deep facial contouring.
| Feature | Wellsfil Fine | Wellsfil Deep | Wellsfil Volume |
|---|---|---|---|
| Formulation Type | Low Viscosity Gel (Soft) | Medium Viscosity Gel | High Viscosity Gel (Hard) |
| Target Depth | Superficial Dermis | Mid to Deep Dermis | Deep Dermis / Subcutaneous |
| Best For | Fine lines, subtle volume | Moderate-to-deep wrinkles, lips | Facial contouring, severe volume loss |
Wellsfil Fine
Low Viscosity Gel (Soft and highly flowable)
Fills superficial tissue depressions by physically expanding the extracellular matrix in the upper dermis.
Monophasic structure with a low degree of cross-linking, ensuring smooth extrusion and minimal lump formation in delicate tissues.
Correction of fine lines, subtle volume restoration, and skin surface smoothing.
Crow's feet (periorbital lines), perioral lines (smoker's lines), fine forehead lines, and superficial neck wrinkles. The softest filler in the lineup, tailored for thin-skinned areas where highly viscous gels could cause visible irregularities or the Tyndall effect.
Supplied as a pre-filled syringe. Typically administered with a fine gauge needle (e.g., 30G).
- Temporary redness
- Swelling
- Bruising and mild tenderness at the injection site
Wellsfil Deep
Medium Viscosity Gel (Balanced elasticity)
Acts as a volumizing implant in the mid-to-deep dermis to lift moderate to deep skin folds and restore structural support.
A balanced monophasic gel that provides a combination of cohesive strength and moldability.
Correction of moderate-to-deep wrinkles, natural volume enhancement, and lip augmentation.
Nasolabial folds, marionette lines, deep forehead lines, lips, and cheeks. The standard, multipurpose variant within the series, ideal for treating the most common facial wrinkles and providing soft volume.
Supplied as a pre-filled syringe. Typically administered with a 27G needle.
- Swelling
- Bruising
- Localized pain and erythema post-injection
Wellsfil Volume
High Viscosity Gel (Thick and highly cohesive)
Injected into deep tissue planes to provide strong structural scaffolding, lifting heavy tissues and projecting facial contours.
High degree of cross-linking resulting in a firm, dense gel that resists degradation and deformation under tissue pressure.
Facial contouring, restoration of severe volume loss, and augmentation of hard tissues.
Chin augmentation, jawline contouring, nose bridge enhancement, cheekbones, and severe nasolabial folds. The most robust filler in the lineup, exclusively used for deep structural support and facial sculpting where maximum lift is required.
Supplied as a pre-filled syringe. Requires an appropriately sized needle or cannula (e.g., 25G or 27G) due to its high viscosity.
- Prolonged firmness at the injection site
- Swelling
- Bruising and tenderness
SOONSU Ultra Reju (3mL x 5 Vials)
$112.00
Unit price perSOONSU Ultra Reju (3mL x 5 Vials)
$112.00
Unit price perSOONSU Ultra Reju
PN & PDRN Cellular Skin Booster
- Polynucleotide (PN) 1%: Deeply hydrates the skin, regulates sebum secretion, and softens and brightens skin texture.
- Polydeoxyribonucleotide (PDRN) 1%: Promotes blood circulation, stimulates fibroblast growth to activate collagen and elastin synthesis, and repairs damaged tissues through strong anti-inflammatory effects.
Multi-molecular weight Hyaluronic Acid, Peptide complex, Amino acid blend, and Antioxidants.
Formulated with natural ingredients that have a 97% match to human DNA, effectively preventing allergic and toxic reactions while promoting profound cellular regeneration.
- Intensive Hydration: Restores deep moisture balance.
- Skin Regeneration: Overall skin regeneration, elasticity restoration, and tone enhancement.
- Texture & Clarity: Reduction of fine wrinkles, pore reduction, and alleviation of acne scars.
- Pigmentation: Improvement of melasma and hyperpigmentation.
Microneedling Therapy System (MTS), Mesotherapy (dermal injection), micro-deposit, or grid injection techniques. Efficacy is significantly enhanced when combined with laser treatments or sonophoresis.
Single-use vials. Open and use immediately.
Mild swelling, redness, bruising, and tenderness at the injection site.
- Apply sunscreen diligently.
- Avoid direct sunlight, excessive heat (e.g., saunas), and harsh environments for a few days post-treatment.
It is a cellular skin booster for intensive hydration, skin regeneration and elasticity, fine wrinkle and pore reduction, acne scar improvement, and pigmentation correction.
Polynucleotide (PN) 1% and Polydeoxyribonucleotide (PDRN) 1%, supported by multi-molecular weight Hyaluronic Acid, a peptide complex, amino acids, and antioxidants.
There is immediate hydration and improvement upon administration, with deep cellular regeneration effects lasting up to 12 months, over a course of 3 to 6 sessions at 2 to 4-week intervals.
Strictly for professional medical and aesthetic use via MTS, mesotherapy, micro-deposit, or grid injection; intravascular injection is strictly prohibited.
It is manufactured by Cosmoderma, Inc.
E.P.T.Q. Dermal Fillers (S100 / S300 / S500)
$45.00
Unit price perE.P.T.Q. Dermal Fillers (S100 / S300 / S500)
$45.00
Unit price per
E.P.T.Q. Dermal Fillers
S100 / S300 / S500
Advanced hyaluronic acid dermal fillers with lidocaine for comprehensive facial rejuvenation and contouring solutions.
Why KSTATION
🧬 [Key Ingredients]
E.P.T.Q. filler is made of highly purified, non-animal cross-linked hyaluronic acid and includes 0.3% lidocaine to reduce discomfort during treatment.
It is designed for smooth injection, natural volume, and long-lasting aesthetic results.
A form of hyaluronic acid at a concentration of 24mg/ml. The cross-linking process makes it more durable and long-lasting
An anesthetic included to improve patient comfort during the injection
[Treatment Applications]
💡 [Benefits and Functions]
e.p.t.q. prides itself on its low MoD. MoD is one of the essential requirements of a filler’s safety. e.p.t.q. fillers have an MoD of ~1%, signifying the total amount of BDDE residue combined with HA molecules, which are compliant with the safety standards.
e.p.t.q. is one of the finest dermal fillers in the market with 100% crosslinked hydrogel allowing optimum rheological properties with a minimum usage of BDDE. This is possible through an exquisite manufacturing technology developed for e.p.t.q. fillers.
Clinical data are essential to demonstrate a dermal filler’s safety and effectiveness. e.p.t.q. has undergone extensive quality control testing and consistently performs at a high level. Compared to other brands, it shows excellent results in WSRS, GAIS, and overall safety evaluations. These findings confirm that e.p.t.q. fillers are effective, safe, and capable of delivering high patient satisfaction.
[Treatment Benefits]
- Immediate volume restoration with natural-looking results
- Enhanced patient comfort with integrated lidocaine
- Long-lasting effects from 6 to 18 months depending on product variant
- Minimal downtime and side effects
🧪 [Usage Guide and Application]
✔️ E.P.T.Q. fillers should be administered only by licensed medical professionals trained in dermal filler procedures.
✔️ All equipment and treatment surfaces must be disinfected to maintain a sterile environment.
✔️ The practitioner checks the packaging integrity, expiration date, and product lot number before opening.
✔️ The needle provided in the package is attached following aseptic guidelines.
✔️The filler is injected slowly and evenly to ensure smooth distribution.
✔️ The practitioner may gently massage the area to achieve a natural contour.
✔️ Patients are usually advised to avoid:
- Extreme heat (sauna, tanning)
- Strenuous exercise
- Alcohol intake for 24–48 hours after the procedure.
The effects of E.P.T.Q. fillers typically last between 12 to 24 months, depending on the treated area, product version, and individual metabolism.
📊 [Product Specifications and Comparison]
| Product | Viscosity | Treatment Area | Injection Layer | Needle | Duration |
|---|---|---|---|---|---|
| S100 | 100 (Low) | Fine lines, Crow's feet, Forehead | Upper / Mid dermis | 30G | 6~12 Months |
| S300 | 300 (Medium) | Nasolabial folds, Lips, Cheeks | Mid / Deep dermis | 27G | 6~12 Months |
| S500 | 500 (High) | Jawline, Chin, Cheekbones | Deep dermis / Sub-Q | 25G / 27G | 12~18 Months |
✅ [Certifications and Compliance]
E.P.T.Q. fillers are produced under globally recognized quality and safety systems. They hold the CE 2292 certification, confirming compliance with rigorous European medical device standards. The product is also approved by the Korean MFDS, ensuring safety and reliability in clinical use. In addition, E.P.T.Q. is manufactured in ISO 13485–certified and GMP–certified facilities, guaranteeing consistent quality control throughout the production process. These certifications collectively demonstrate E.P.T.Q.’s commitment to delivering premium, trustworthy dermal filler solutions.
⚠️ [Safety Information]
Professional Use Only — This product must be administered by licensed medical professionals with appropriate training in dermal filler injection techniques.
- Mild swelling, redness, or tenderness may occur temporarily after treatment. These symptoms usually resolve within a few days.
- Patients should avoid excessive heat, sauna, tanning beds, strenuous exercise, and alcohol consumption for 24–48 hours post-treatment.
- To ensure product integrity, practitioners should verify packaging, expiration date, and lot number before use.
- Each syringe is single-use and must not be reused under any circumstances.
- Follow proper injection techniques
- If any unexpected reactions or concerns occur after using E.P.T.Q. fillers, patients should immediately consult a qualified medical professional for proper evaluation and care.
- Do not inject into blood vessels
- Do not use E.P.T.Q. fillers in patients with known hypersensitivity to hyaluronic acid or lidocaine (for lidocaine-containing versions).
- Contraindicated for individuals who are pregnant or breastfeeding.
- Should not be administered on areas with active inflammation, infection, or skin disease.
- Not recommended for patients with autoimmune disorders or those taking immunosuppressive medication, unless cleared by a medical professional.
- Avoid use in areas previously treated with incompatible fillers or where permanent filler materials exist.
❓ Frequently Asked Questions
E.P.T.Q. dermal fillers are used for comprehensive facial rejuvenation and contouring. The S100 variant corrects fine lines, crow's feet, and forehead lines; S300 enhances volume in nasolabial folds, lips, and cheeks; and S500 is used for facial contouring of the jawline, chin, and cheekbones. E.P.T.Q. is made of highly purified, non-animal cross-linked hyaluronic acid at a concentration of 24mg/ml, and includes 0.3% lidocaine to reduce discomfort during treatment. The effects of E.P.T.Q. fillers typically last between 12 to 24 months, depending on the treated area, product version, and individual metabolism. E.P.T.Q. fillers should be administered only by licensed medical professionals trained in dermal filler procedures. They are contraindicated for patients with known hypersensitivity to hyaluronic acid or lidocaine, individuals who are pregnant or breastfeeding, and areas with active inflammation, infection, or skin disease.What is E.P.T.Q. used for?
What is E.P.T.Q. made of?
How long do results from E.P.T.Q. last?
Who should administer E.P.T.Q.?
MENNUS PLUS (PLA 360mg × 1 Vial)
$88.00
Unit price perMENNUS PLUS (PLA 360mg × 1 Vial)
$88.00
Unit price perMENNUS PLUS
PLA 360mg x 1 Vial
Advanced poly-L-lactic acid (PLLA) based filler designed for long-lasting collagen synthesis and volume restoration
Single vial containing 360mg of poly-L-lactic acid powder for professional use
- Primary Active Component
- Poly-L-lactic Acid (PLLA) - A biodegradable and biocompatible polymer that stimulates the body's natural collagen production.
- Reconstitution Components
- For preparation, mix with 8-10ml of sterile distilled water and 1-2ml of 2% Lidocaine for optimal injection experience.
-
Collagen Stimulation
PLLA particles encourage the body to produce its own collagen, leading to natural and gradual improvement over time. -
Spherical Design
Specially designed spherical PLA particles allow for easy injection without needle blockage and create even, stable volume. -
Fast Dilution
Freeze-drying technology enables faster reconstitution and smoother injection experience.
- Long-lasting collagen regeneration and volume restoration
- Improvement of deep wrinkles and fine lines
- Overall skin rejuvenation and increased elasticity
- Natural and gradual improvement over 18-24 months
Initial volume effect lasts 3-9 months, while collagen regeneration provides lasting results for 18-24 months.
Reconstitute 360mg PLA powder with 8-10ml sterile distilled water and 1-2ml of 2% Lidocaine
Use 18G needle to withdraw the reconstituted solution from the vial
Inject using 26G needle or 25G cannula into superficial dermal to subcutaneous layer
Perform recommended massage and provide proper aftercare instructions to patients
| Treatment Strategy | Viscosity | Treatment Area | Injection Layer | Needle Gauge |
|---|---|---|---|---|
| Facial Volume & Contouring | Medium | Cheeks, temporal area, nasolabial folds, chin | Dermal to subcutaneous | 25G cannula or 26G needle |
| Skin Rejuvenation | Low (after dilution) | Face, neck & decollete, hands | Superficial dermal | 26G needle |
Suitable Treatment Areas
- Face: cheeks, chin, temporal area, nasolabial folds
- Neck and decollete area for skin quality improvement
- Hands for volume restoration and skin rejuvenation
- Any area requiring long-term collagen stimulation
Storage Requirements
- Store at 2°C ~ 25°C in a cool, dry environment
- Protect from direct sunlight and extreme temperatures
- Use reconstituted product within 72 hours
- Keep vial tightly sealed when not in use
How does MENNUS PLUS differ from traditional fillers?
What is the reconstitution process?
How many treatment sessions are typically needed?
What are the expected results timeline?
- What is MENNUS PLUS used for?
- MENNUS PLUS is a PLLA biostimulator filler used for long-lasting collagen regeneration and volume restoration, improvement of deep wrinkles and fine lines, and overall skin rejuvenation with increased elasticity. It is suitable for the cheeks, chin, temporal area, nasolabial folds, neck, decollete, and hands.
- What is MENNUS PLUS's key ingredient?
- The primary active component is Poly-L-lactic Acid (PLLA) at 360mg per vial, a biodegradable and biocompatible polymer in spherical particle form that encourages the body to produce its own collagen for natural, gradual improvement.
- How is MENNUS PLUS prepared?
- The 360mg PLA powder is reconstituted with 8-10ml of sterile distilled water and 1-2ml of 2% Lidocaine. The solution is withdrawn with an 18G needle and injected using a 26G needle or 25G cannula into the superficial dermal to subcutaneous layer. Freeze-drying technology enables faster dilution.
- How long do results last?
- The initial volume effect lasts 3-9 months, while collagen regeneration provides lasting results for 18-24 months. A course of 1-3 sessions is recommended depending on individual needs.
- Who should administer MENNUS PLUS?
- MENNUS PLUS is for professional use and should be administered with proper technique and aftercare. It should be avoided in patients with a history of keloid formation or hypertrophic scarring, and common injection-related reactions may include swelling, pain, or hemorrhage.
POLYDIO - Polydioxanone (PDO 300mg × 1 Vial)
$77.00
Unit price perPOLYDIO - Polydioxanone (PDO 300mg × 1 Vial)
$77.00
Unit price perPOLYDIO
PDO 300mg x 1 Vial
Advanced polydioxanone-based collagen stimulator for long-lasting skin rejuvenation and natural volume restoration.
Why KSTATION
Product Overview
POLYDIO is a revolutionary PDO-based dermal filler that stimulates natural collagen production for sustained aesthetic improvements.
Product Packaging
Single vial containing 300mg powder for reconstitution
Mechanism of Action
Visual demonstration of PDO microsphere collagen stimulation
Treatment Applications
Facial areas suitable for POLYDIO application
Composition & Components
Expected Benefits & Functions
Collagen Stimulation
Promotes natural collagen regeneration and skin tissue renewal
Skin Improvement
Enhanced skin elasticity, firmness, and overall texture quality
Anti-Aging Effects
Reduction of fine lines, wrinkles, and improvement in skin tone
Long-term aesthetic benefits are achieved through gradual biodegradation of PDO microspheres over approximately 1 year, during which continuous collagen and elastin production occurs.
Key Benefits Summary
- Collagen regeneration and stimulation for natural skin renewal
- Improvement of fine lines and wrinkles through tissue remodeling
- Enhanced skin elasticity and firmness with lasting results
- Pore reduction and overall skin tone improvement
- Natural volume restoration without synthetic fillers
- Long-lasting effects maintained for 1-2 years post-treatment
Application Protocol
Injection Parameters
- Target Layer: Between dermis and subcutaneous area
- Recommended Needle: 26G Cannula for injection
- Reconstitution: 18G needle for preparation
- Application: Single-use vial, immediate use after preparation
Treatment Areas
- All facial areas including fine lines and wrinkles
- Pore refinement and skin texture improvement
- Skin hydration and elasticity enhancement
- Overall facial skin tone and volume restoration
Treatment cycle provides long-lasting effects with results maintained for 1-2 years due to gradual biodegradation and continuous neocollagenesis.
Technical Specifications
| Component | Concentration | Function | Properties |
|---|---|---|---|
| Polydioxanone (PDO) | 150mg | Collagen Stimulator | Biocompatible, Absorbable |
| Carboxymethyl Cellulose (CMC) | 150mg | Carrier Gel | Injectable Suspension |
| Total Content | 300mg | Biostimulator | Powder for Reconstitution |
Mechanism of Action
Biostimulation Process
- PDO microspheres activate fibroblasts upon injection
- Gradual biodegradation stimulates collagen synthesis
- Continuous neocollagenesis over 12-month period
- Enhanced elastin production for improved skin elasticity
The spherical PDO particles integrate with dermal tissue, providing sustained collagen stimulation as they naturally biodegrade.
Safety Information
Contraindications & Precautions
- Do not use on inflamed or infected areas
- Ensure proper reconstitution before injection
- Single-use vial - do not reuse or store after opening
- Follow aseptic technique throughout procedure
Post-Treatment Guidelines
- Monitor injection sites for normal healing response
- Advise patients on appropriate post-care protocols
- Schedule follow-up appointments as clinically indicated
Frequently Asked Questions
Technical Documentation
Clinical Guidelines
Comprehensive injection protocols and safety guidelines
Quality Assurance
Manufacturing standards and quality control documentation
Clinical Studies
Scientific evidence supporting efficacy and safety profile
Frequently Asked Questions
REJEUNESS Dermal Fillers (FINE / DEEP / SHAPE)
$36.00
Unit price perREJEUNESS Dermal Fillers (FINE / DEEP / SHAPE)
$36.00
Unit price perREJEUNESS
FINE / DEEP / SHAPE
Highly purified hyaluronic acid dermal fillers with lidocaine for comfortable and effective facial aesthetic treatments
Why KSTATION
Product Overview
Professional-grade hyaluronic acid fillers with specialized formulations for comprehensive facial treatments
Package Contents
- 1.1ml x 1 pre-filled syringe
- 2 sterile needles included
- Cross-linked Hyaluronic Acid 24mg/ml
- 0.3% Lidocaine for pain reduction
Key Features
Composition & Technical Specifications
Product Variants Comparison
| Product Name | Viscosity | Treatment Area | Injection Layer | Needle Gauge |
|---|---|---|---|---|
| FINE | Low | Superficial lines, periorbital lines, forehead, crow's feet | Superficial to mid dermis | 30G |
| DEEP | Medium | Moderate to deep wrinkles, nasolabial folds, lip volume, face contouring | Mid to deep dermis | 27G |
| SHAPE | High | Deep folds, extensive volume, cheeks, chin, facial contouring | Deep dermis to subcutaneous layer | 26G |
REJEUNESS FINE
Primary Applications
Designed for the prevention and correction of fine lines, superficial wrinkles, and skin texture improvement with the smallest particles for natural-looking results.
Key Benefits
- Smallest particles for delicate areas
- Low viscosity for natural integration
- Perfect for superficial wrinkle correction
- Ideal for thin, superficial lines
REJEUNESS DEEP
Primary Applications
Effective for correcting medium to deep wrinkles and folds, as well as enhancing lip shape and volume. Medium particle size with optimized viscoelasticity.
Key Benefits
- Medium viscosity for versatile applications
- Optimized for areas with muscle movement
- Excellent for lip enhancement procedures
- Balanced texture offering structure and softness
REJEUNESS SHAPE
Primary Applications
Formulated to correct deep folds, create extensive volume, and shape facial contours. Higher viscosity and larger particles for high-impact projection and lift.
Key Benefits
- High viscosity for structural support
- Superior projection and lift capabilities
- Long-lasting volume enhancement
- Perfect for significant facial contouring
Treatment Guidelines
Treatment Areas
Fine lines, moderate to deep wrinkles, folds, lip enhancement, cheeks, chin, jawline, and various facial contouring applications
Application Method
Direct syringe injection into the dermis or subcutaneous layer, varying by product version from superficial dermis to deep subcutaneous injection
Safety Information & Storage
Storage Requirements
- Store at 2-25°C room temperature
- Keep away from direct sunlight
- Do not freeze
- 24 months shelf life from manufacturing date
- Use immediately after opening
Safety Guidelines
- Medical professional use only
- Check for hypersensitivity before treatment
- Do not use if package is damaged
- Follow proper injection techniques
Which Product Is Right for Me?
Choose a product with different viscosity and injection layers depending on the treatment area and soft tissue volume
For Fine Lines & Texture Improvement
Choose FINE for prevention and correction of superficial lines, periorbital areas, and delicate facial regions requiring natural improvement
For Moderate to Deep Wrinkles
Choose DEEP for nasolabial folds, lip enhancement, and areas requiring balanced structure with natural movement
For Structural Volume Enhancement
Choose SHAPE for extensive volume creation, deep folds correction, and significant facial contouring applications
Expected Efficacy
Fine Lines & Wrinkle Correction
Improvement and correction of fine lines, moderate to deep wrinkles, and facial folds
Volume Restoration
Restores facial volume and improves skin elasticity for a more youthful appearance
Facial Contouring & Enhancement
Enhances lip fullness and shapes facial contours for improved facial harmony
Advanced Technology Features
UPHEC Technology
Unique cross-linking process that optimizes viscoelasticity while maintaining gel integrity
HCCL Process
High Concentration Cross-Linking technology minimizes BDDE residue for enhanced safety
100% Cross-linked
Complete cross-linking using BDDE ensures optimal durability and longevity of results
Frequently Asked Questions
REVITRANE (PREMIUM-Q / PREMIUM SUB-Q)
$41.00
Unit price perREVITRANE (PREMIUM-Q / PREMIUM SUB-Q)
$41.00
Unit price perREVITRANE
PREMIUM-Q / PREMIUM SUB-Q
Advanced hyaluronic acid fillers for precision facial contouring and non-surgical rhinoplasty
Why KSTATION
Product Overview
Professional-grade hyaluronic acid fillers with specialized formulations
Package Contents
- 1ml x 1 syringe
- 2 x 25G needles
- No Lidocaine included
Key Features
Composition & Technical Specifications
Product Variants
| Product Name | Viscosity | Treatment Area | Injection Layer | Needle Gauge |
|---|---|---|---|---|
| PREMIUM-Q | High cohesivity | Non-surgical Rhinoplasty | Specific to rhinoplasty | 25G |
| PREMIUM SUB-Q | Very high viscosity | Facial Contouring | Deep dermis to Sub-Q | 25G |
Treatment Protocol
Safety Information & Storage
Storage Conditions
- Storage Temperature: 2-25°C
- Store away from direct sunlight
- Avoid extreme temperatures
- Must be used immediately after opening
Precautions
- Professional use only
- Single-use sterile product
- Check for hypersensitivity before treatment
- Follow proper injection techniques
Product Selection Guide
Choose the appropriate product based on treatment area and desired outcome
For Natural Nose Reshaping
Choose PREMIUM-Q for non-surgical rhinoplasty with precision control and minimal migration risk
For Structural Facial Contouring
Choose PREMIUM SUB-Q for comprehensive facial volume enhancement and deep structural support
Frequently Asked Questions
- What is REVITRANE used for?
- REVITRANE is a cross-linked hyaluronic acid filler used for non-surgical rhinoplasty to reshape the nose bridge and tip (PREMIUM-Q) and for advanced facial contouring and volume restoration of the cheeks, chin, jawline, and nasolabial folds (PREMIUM SUB-Q).
- What is REVITRANE made of?
- REVITRANE is made of cross-linked hyaluronic acid at 20mg/ml in a biphasic, particle-type gel produced with BDDE double cross-linking technology for a uniform structure with enhanced safety and stability. It does not include lidocaine.
- Who manufactures REVITRANE?
- REVITRANE is manufactured by BR Pharm Co., Ltd. in South Korea.
- How long do results from REVITRANE last?
- Results from REVITRANE typically last approximately 8-10 months. Follow-up treatments may be performed after the initial duration.
- Who should administer REVITRANE?
- REVITRANE is for professional use only and requires professional administration. It should not be used in individuals with known hypersensitivity to hyaluronic acid, and a hypersensitivity check should be performed before treatment.
STARDERM (PICO / MEGA / TERA)
$32.00
Unit price perSTARDERM (PICO / MEGA / TERA)
$32.00
Unit price perSTARDERM SERIES
PICO · MEGA · TERA
Injection Layer: Mid to upper dermis
Needle Gauge: 27G, 30G
Efficacy: Correction of fine lines and superficial wrinkles with smooth injection for natural-looking results in delicate areas
Injection Layer: Deep dermis
Needle Gauge: 27G
Efficacy: Improvement of deep wrinkles and restoration of facial volume with effective filling of deep folds and facial contouring
Injection Layer: Subcutaneous layer
Needle Gauge: 25G, 27G
Efficacy: Volumizing and contouring for structural facial enhancement with highest viscosity for significant volume and strong contours
| PRODUCT VERSION | VISCOSITY | TREATMENT AREA | INJECTION LAYER | NEEDLE GAUGE |
|---|---|---|---|---|
| STARDERM PICO | Low | Fine wrinkles, under-eye bags, lips | Mid to upper dermis | 27G, 30G |
| STARDERM MEGA | Medium | Deep wrinkles, nasolabial folds, cheekbones | Deep dermis | 27G |
| STARDERM TERA | High | Volumizing, contouring, nose, chin | Subcutaneous layer | 25G, 27G |
- This product should be administered by a qualified medical professional only
- Store at room temperature (1°C - 30°C) - Do not freeze
- Protect from direct sunlight exposure
- Keep away from children and unauthorized personnel
- Follow recommended injection guidelines strictly
- Monitor for unexpected reactions during and after treatment
- Maintain sterile conditions throughout procedure
- Ensure proper needle gauge selection for each product version
- Not recommended for patients with known hypersensitivity to hyaluronic acid or lidocaine
- Avoid injection in areas with active inflammation or infection
- Exercise caution in patients with bleeding disorders or taking anticoagulants
- Not suitable for pregnant or breastfeeding patients
- Avoid injection near permanent implants or fillers
- Consider patient medical history and current medications
- Perform thorough consultation and consent process
- Monitor for delayed hypersensitivity reactions