Skin Boosters and Ampoules

A synergistic effect of Hydration (HA), Regeneration (PDRN), and Cellular Recharging (NAD+). It acts as a bio-stimulator to activate the skin's natural healing and energy production cycles.

• Deep Hydration & Glow: Provides an instant moisture boost and "water glow" radiance.
• Skin Regeneration: Repairs damaged skin barrier and improves texture.
• Cellular Energy: NAD+ boosts ATP production for enhanced cell renewal.
• Anti-Aging: Softens fine lines, improves elasticity, and tightens pores.

Rejuva Healer S is marketed as a 4th Generation Skin Booster. It eliminates the need to layer multiple products by combining the benefits of HA (1st Gen), PDRN (2nd Gen), and Exosomes (3rd Gen) with the added cellular energy boost of NAD+.

What is Rejuva Healer S used for?

Rejuva Healer S is a 4th generation NAD+ skin booster used for deep hydration and glow, skin regeneration and barrier repair, cellular energy boosting, and anti-aging (softening fine lines, improving elasticity, and tightening pores).

What are the key ingredients?

The primary active ingredients are PDRN 2% (Salmon DNA), Hyaluronic Acid 17mg/mL (non-crosslinked), and NAD+ (Nicotinamide Adenine Dinucleotide).

How long do results last?

Hydration and glow are visible immediately after the 1st session, while texture, pore, and elasticity improvements become prominent after the 3rd session. The standard cycle is 3 to 5 sessions spaced 2–3 weeks apart.

Who should administer Rejuva Healer S?

It is for external/professional use only and is administered by injection (papule or nappage technique) using a 30G × 4mm or 32G needle, and should be administered by a qualified professional.

Who manufactures Rejuva Healer S?

Rejuva Healer S is supplied by Phace Global / Esta Global.

Collagenesis-Enabled Solubilized Active and Biodegradable Polymer technology enables PCL to be fully solubilized in water without microparticles, unlike traditional PCL fillers.

GOURI spreads naturally into the surrounding tissue due to its liquid nature and acts as a "Fundamental Anti-Aging" treatment. It biodegrades slowly while stimulating fibroblasts to synthesize new collagen (Neocollagenesis).

• Intense Collagenesis: Stimulation of the skin's natural collagen production.
• Skin Rejuvenation & Lifting: Improvements in skin elasticity, texture, and firmness.
• Wrinkle Reduction: Softens fine lines and deep wrinkles (e.g., crow's feet, marionette lines).
• Natural Volume: Restores volume loss gradually through natural collagen buildup.

Typically requires 2mL (2 syringes) per session for full-face coverage (1mL per side).

Can be safely used for the eye area due to its liquid spreadability.

Mild swelling (edema) is common for 2–3 days post-injection due to the collagenesis inflammatory response. Redness, bruising, or tenderness may occur.

• Avoid heavy makeup for 24 hours.
• Avoid sauna, alcohol, and strenuous exercise for 1 week.

What is GOURI used for?

GOURI is a liquid-type PCL injectable used as a fundamental anti-aging treatment. It stimulates natural collagen production, rejuvenates and lifts skin, softens fine lines and deep wrinkles, and restores natural volume gradually.

What is the key ingredient?

The key ingredient is Polycaprolactone (PCL) at 210mg/mL (21%), delivered as a fully solubilized, microparticle-free liquid using CESABP technology.

How long do results last?

Visual improvements often start within 1–2 weeks, and results typically last 6–12 months as the PCL degrades naturally. The standard cycle is 3 sessions spaced 4 weeks apart, with maintenance of 1–2 sessions every 6–12 months.

Who should administer GOURI?

GOURI is a Class III medical device administered by injection into the deep dermis to subcutaneous layer using a 30G to 35G needle, and should be administered by a qualified medical professional.

Who manufactures GOURI?

GOURI is manufactured by Dexlevo Inc.

• PLLA (Poly-L-Lactic Acid): Derived from Alpha Hydroxy Acid, specifically sourced from plant-based materials like corn and sugarcane.
• CMC (Carboxymethylcellulose): Provides immediate volume upon injection.

Dual-Action Formula: CMC provides instant volume and smoothing upon injection. Over time, PLLA gradually breaks down to stimulate natural collagen regeneration (neocollagenesis). PLLA is completely metabolized by the body into carbon dioxide, water, and simple sugars, leaving no residue behind.

• Immediate plumping and smoothing of the skin via CMC.
• Long-term skin rejuvenation and progressive collagen regeneration via PLLA.
• Restoration of facial and body structure with improved skin elasticity and firmness.

Immediate visible volume from CMC. Natural collagen generation develops over several months, with results lasting up to 2 years.

Typically 24-36 months from the manufacturing date. Single-use vial only; discard any remaining product immediately after use.

• Avoid using the sauna, swimming pool, or gym for at least 7 days after treatment.
• Avoid vigorous facial treatments or massages for 2 weeks post-injection (except for the prescribed 5-5-5 gentle massage).
• Maintain a healthy lifestyle to support optimal collagen production.

It is a collagen biostimulator for immediate plumping and long-term skin rejuvenation, restoring facial and body structure with improved elasticity and firmness.

PLLA (Poly-L-Lactic Acid), a plant-based collagen stimulator sourced from corn and sugarcane, combined with CMC (Carboxymethylcellulose) for immediate volume.

Rejuva Lume is a lyophilized powder and must be reconstituted before use: add Sterile Water for Injection and agitate until a uniform, lump-free suspension forms, following the dilution volume and hydration time in the manufacturer's Instructions for Use.

There is immediate visible volume from CMC, while natural collagen generation develops over several months, with results lasting up to 2 years.

Strictly for professional medical use, injected subcutaneously or into the deep dermis with an 18G cannula or 25-27G needle; do not inject intravascularly.

It is manufactured by Phace Global Co., Ltd.

• HA (H-HA & L-HA): 192.00mg Total. Provides deep/surface hydration and blocks free radicals.
• Sodium Succinate: 96.00mg. Reinforces the skin barrier and stimulates metabolic processes.
• PDRN & PN: 5.00mg Total. Stimulates fibroblasts, accelerates cell renewal, and boosts wound healing.
• NAD+: Boosts cellular energy (ATP), promotes DNA repair, and targets senescent cells.
• Glutathione & Tranexamic Acid: Inhibits melanin, fades dark spots, and provides strong brightening effects.

A next-generation multi-functional skin booster combining highly effective ingredients for total anti-aging, whitening, and hydration, designed to leave no residues in the body with FDA proven safety.

• Brightening & Clarity: Reduction of hyperpigmentation, dark spots, and patches.
• Anti-Aging: Reduction of fine wrinkles, smoothing of skin texture, and stimulation of collagen.
• Hydration & Firmness: Volume replenishment and improvement in elasticity.
• Healing & Calm: Reduction of inflammation, calming of redness, and under-eye rejuvenation.

Cycle: 2-3 treatments at 1-month intervals.
Duration: Skin improvement and volume restoration effects are long-lasting, maintaining for 4 to 8 months.

Typically 24-36 months from the manufacturing date (unopened). Use immediately after mixing with saline. Discard any remaining solution after opening (single-use vial).

• Side Effects: Mild swelling, bruising, redness, and tenderness at the injection sites.
• Post-Care: Apply sunscreen regularly. Avoid heavy makeup immediately after the procedure, and refrain from exposure to extreme heat (saunas) or strenuous exercise during the initial recovery period.

It is a next-generation multi-functional skin booster for total anti-aging, brightening (reducing hyperpigmentation and dark spots), hydration, firmness, and skin healing.

HA (H-HA & L-HA, 192.00mg), Sodium Succinate (96.00mg), PDRN & PN (5.00mg), NAD+, and Glutathione & Tranexamic Acid for brightening.

Reconstitute by injecting 1mL of normal saline into the vial and shaking well before use. A cycle of 2-3 treatments at 1-month intervals gives effects lasting 4 to 8 months.

Strictly for professional medical use; deep dermis injections must only be performed by professionals and must not be intravascular.

It is manufactured by Healink Korea.

• HA (H-HA & L-HA): 100.00mg Total. Deep hydration and metabolic stimulation.
• Sodium Succinate: 80.50mg. Synergizes with HA for intense moisture.
• PDRN & PN: 6.00mg Total (Increased concentration). Accelerates cell renewal and collagen generation.
• RH Collagen: 1.50mg. Directly supplements structural proteins for immediate firming.
• NAD+: Boosts cellular energy (ATP) and repairs DNA.
• Glutathione & Tranexamic Acid: Inhibits melanin synthesis and provides overall skin brightening.

Acts as a complete "Skin Vitalizer". It delivers a comprehensive anti-aging, whitening, and regenerating effect in a single, ready-to-use syringe without leaving any residues in the body.

• Brightening & Lightening: Significantly fades dark spots, pigmentation, and brightens skin tone.
• Anti-Aging & Firming: Stimulates collagen generation, reduces fine wrinkles, and improves skin elasticity.
• Hydration & Volume: Replenishes volume, provides a lifting effect, and enhances skin compliance.
• Rejuvenation & Repair: Rejuvenates under-eye areas, reinforces the skin barrier, and accelerates wound healing.

Cycle: 2-3 treatments at 1-month intervals.
Duration: Volume replenishment and skin rejuvenation effects maintain for 4 to 8 months.

Typically 24–36 months from the manufacturing date (unopened). Single-use only; strictly discard any remaining product after use.

• Side Effects: Mild swelling, redness, bruising, tenderness, or temporary papules at the injection sites.
• Post-Care: Apply sunscreen regularly. Avoid heavy makeup immediately after the procedure, and refrain from exposure to extreme heat (saunas) or strenuous exercise during the initial recovery period.

It is a multi-functional skin booster ("Skin Vitalizer") for brightening, anti-aging and firming, hydration and volume, and skin rejuvenation and repair.

HA (H-HA & L-HA, 100.00mg), Sodium Succinate (80.50mg), PDRN & PN (6.00mg), RH Collagen (1.50mg), NAD+, and Glutathione & Tranexamic Acid.

It is a ready-to-use pre-filled syringe requiring no mixing with saline. A cycle of 2-3 treatments at 1-month intervals gives effects lasting 4 to 8 months.

Strictly for professional medical use; injected subcutaneously or into the deep dermis by a trained medical professional, never intravascularly.

It is manufactured by Healink Korea.

A Dual-Action system where HA provides immediate deep hydration and plumping, while PDRN enhances cellular regeneration, DNA synthesis, and tissue repair (anti-inflammatory).

• Deep Hydration & Glow: Instantly hydrated skin with a natural radiant glow.
• Skin Regeneration: Repairs damaged skin barrier and improves overall skin health.
• Texture & Pores: Smoothes skin texture and tightens enlarged pores.
• Anti-Aging: Improves elasticity and firmness while softening fine lines.
• Tone Correction: Brighter, more even skin tone with reduced redness.

Single-use vials. Discard any remaining solution immediately after opening.

Mild swelling, redness, or papules (bumps) at injection sites are common and typically resolve within 24–48 hours.

It is a skin booster for deep hydration, skin regeneration, texture and pore improvement, and anti-aging on the full face, especially dry, dull, or sensitive skin.

PDRN 2% (Salmon DNA) and non-crosslinked Hyaluronic Acid 17mg/mL, working as a dual-action system for hydration and cellular repair.

Instant glow after Session 1, visible pore tightening and elasticity boost by Session 3, and full rejuvenation effects by Session 5 (5 sessions, 2 weeks apart).

For external/professional use only, applied via papule injection or microneedling (MTS) by a qualified practitioner.

It is manufactured by Phace Global Co., Ltd.

• Hyaluronic Acid (HA): 64mg/2mL (32mg High MW + 32mg Low MW)
• Succinic Acid: 16mg (1.6%) – Antioxidant & Anti-inflammatory
• Peptide Complex: Tripeptide-29 (Collagen Type I stimulation)

This high-concentration HA formula acts as a scaffold for immediate deep hydration (Bio-remodeling). Simultaneously, Succinic Acid activates mitochondrial energy to reduce inflammation, while Tripeptide-29 specifically targets collagen upregulation to restore elasticity.

• Deep Hydration & Glow: Restores moisture balance in dehydrated skin.
• Lifting & Tightening: Improves skin laxity via bio-remodeling.
• Anti-Inflammatory: Succinic Acid reduces redness, suitable for sensitive skin.
• Wrinkle Reduction: Smoothes fine lines and improves texture.

Ready-to-use pre-filled syringe; no mixing required.

EVEHILO is positioned as an advanced bio-remodeler alternative to products like Profhilo. It differentiates itself by incorporating Succinic Acid for brightening and anti-inflammatory benefits, alongside Tripeptide-29 for enhanced collagen stimulation.

Best for patients requiring both structural lifting/tightening and skin quality improvement (treating acne scars, pigmentation, or dullness).

Store in a cool, dry place away from direct sunlight. Do not freeze. Single-use only.

• Mild redness, swelling, or localized bumps (papules) at injection points (usually resolve within 24–48 hours).
• Bruising may occur.

• Avoid heavy makeup for 12 hours.
• Avoid saunas, steam rooms, and intense exercise for a few days.

It is used for deep hydration and glow, lifting and tightening via bio-remodeling, anti-inflammatory benefits for sensitive skin, and wrinkle reduction with texture improvement.

Its primary active ingredients are Hyaluronic Acid (HA) 64mg/2mL (32mg High MW + 32mg Low MW), Succinic Acid 16mg (1.6%), and a peptide complex featuring Tripeptide-29.

Visible improvement appears in 1–2 weeks and effects last 6–9 months. An initial course of 2 treatments spaced 4 weeks apart is recommended.

It is for professional use only and should be administered by a qualified practitioner.

EVEHILO is associated with Celesta Korea / BS Pharm.

Breaks down within the body at a constant form to provide temporal reduction of facial wrinkles.

High purity formulation that triggers no immune response. Officially classified as a medical device.

• Improvement of skin elasticity, anti-aging, and skin brightening.
• Hydration and moisturization.
• Reduces sebum production and oil secretion.
• Provides a glowing effect and revitalizes collagen.

Forehead lines, glabella frown lines (11's), crow's feet, under eye lines, smile lines, marionette lines (prejowl), and platysmal neck rings.

Store in a cool, dry place away from direct sunlight. Strictly for single-use application; safely discard the syringe and needle after use.

Injection site reactions such as mild swelling, redness, bruising, tenderness, and temporary "embossing" (small bumps at the injection points).

• Apply broad-spectrum sunscreen diligently.
• Avoid direct UV exposure, extreme heat (e.g., saunas, hot tubs), and strenuous workouts for at least 48 hours to prevent infection and prolonged swelling.

Juveheal W utilizes ICT (Intracellular Transduction) Technology to deliver whitening agents deeply. Niacinamide and Arbutin work synergistically to inhibit melanin production and treat pigmentation, while fermented extracts and Rice Bran Water reinforce the barrier and brighten overall skin tone.

• Whitening & Tone-Up: Improves dark skin tone and restores a bright complexion.
• Pigmentation Treatment: Helps control melanin to prevent and treat dark spots and melasma.
• Sebum Control: Regulates excessive oil production.
• Barrier Reinforcement: Strengthens skin immunity against external irritants.

Full face, specifically for hyperpigmentation, uneven skin tone, and dullness.

Remove the plastic flip-off cap and aluminum seal; apply using a dropper or syringe.

Avoid direct sunlight (Crucial for whitening products).

• Mild irritation or redness may occur, particularly if used with microneedling.

• Strict sun protection (Sunscreen) is required after treatment to prevent repigmentation.

What is Juveheal W used for?

Juveheal W is a whitening and tone-up ampoule. It improves dark and uneven skin tone, helps treat dark spots and melasma by controlling melanin, regulates sebum, and reinforces the skin barrier.

What are the key ingredients?

The primary active ingredients are Niacinamide 2.0% (a K-FDA functional ingredient) and Arbutin, supported by Lactobacillus/Soybean Ferment Extract, Morus Alba Bark Extract, and Rice Bran Water.

How is it applied?

It is applied topically and can be used with MTS (Microneedling), Derma Pen, or Derma Stamp to improve absorption, typically 1 session per week or daily as a topical serum.

Who should administer Juveheal W?

Juveheal W is for external use only. When combined with microneedling devices such as MTS, Derma Pen, or Derma Stamp, it should be used as a professional practice under professional guidance.

Who manufactures Juveheal W?

Juveheal W is manufactured by J MEDICAL Inter Co., Ltd.

Juveheal V uses ICT (Intracellular Transduction) Technology to enhance the penetration of its complex formula into skin cells. It creates an ideal environment for fibroblast activation, regenerating skin components and providing intense hydration for a "Water Glow" effect.

• Radiance & Glow: Instantly improves skin tone and luminosity (Gwangchae).
• Deep Hydration: Restores moisture balance and treats inner dryness with high-dose HA.
• Vitality & Rejuvenation: Revitalizes tired, dull skin and improves overall skin health.
• Barrier Reinforcement: Strengthens the skin's natural defense system.

Full face, specifically for dull, dehydrated, or tired-looking skin.

Remove the flip-off cap and aluminum seal; apply using a dropper or syringe.

Store in a cool, shaded place away from direct sunlight.

• Mild redness or irritation may occur immediately after MTS application but typically subsides within 24 hours.

• Apply a soothing mask and sunscreen.
• Avoid heavy makeup for 24 hours.

What is Juveheal V used for?

Juveheal V is a vitality and radiance ampoule. It improves skin tone and luminosity, provides deep hydration with high-dose HA, revitalizes tired and dull skin, and reinforces the skin barrier for a Water Glow effect.

What are the key ingredients?

The primary active ingredients are High Concentration HA (3,500ppm), Multi-Growth Factors (EGF, FGF, VEGF, IGF), and a Multi-Ingredient Complex of 60+ active ingredients including PDRN.

How is it applied?

It is applied topically and optimized for use with MTS, Derma Pen, or Derma Stamp to facilitate deep absorption. The recommended course is 3 to 5 sessions total, 1 session every 1–2 weeks.

Who should administer Juveheal V?

Juveheal V is for external/cosmetic microneedling use only. For deep absorption it is used with professional devices such as MTS, Derma Pen, or Derma Stamp under professional guidance.

Who manufactures Juveheal V?

Juveheal V is manufactured by J MEDICAL Inter Co., Ltd.

• 1 Cellular Signaling: GHK-Cu participates in cellular signaling pathways, modulating gene expression related to skin repair and regeneration.
• 2 Fibroblast Activation & ECM Synthesis: Promotes fibroblast activity and stimulates extracellular matrix (ECM) production for structural skin renewal.
• 3 Matrix Organization: Supports the synthesis of collagen, elastin, and glycosaminoglycans (GAG) to restore dermal density, firmness, and elasticity.

• Brighter skin tone and healthy, luminous glow
• Improved skin firmness and elasticity
• Deep hydration and overall skin conditioning
• Antioxidant defense and barrier recovery
• Skin remodeling and extracellular matrix maintenance

• Use opened vials promptly.
• Discard any unused, opened product in accordance with standard single-use vial practice.

• 1 Avoid direct sun exposure for a short period following treatment.
• 2 Avoid saunas and intense heat for a short period following treatment.
• 3 Avoid vigorous massage of the treated area immediately after the procedure.

The formula provides anti-apoptosis, anti-melanogenesis, anti-osteonecrosis, wound healing, anti-inflammation, tissue damage prevention, and bone regeneration effects. It utilizes DNA-based ingredients to reconstruct the dermal matrix and repair damaged cells. The released PN significantly stimulates the migration of human dermal fibroblasts, which plays a crucial role in tissue wound repair.

Addresses the root causes of aging by promoting skin regeneration and increasing dermal density, ultimately boosting collagen production.

• Improves overall skin tone, leaving it visibly brighter and smoother.
• Deeply moisturizes the skin with nourishing ingredients to maintain optimal hydration levels.
• Minimizes the appearance of pores by enhancing skin elasticity and hydration.
• Reduces roughness and pore volume while improving fine wrinkles and overall skin texture.

Specifically designed to target fine lines and loss of elasticity around the eyes.

Standard PN eye boosters generally recommend 3–4 sessions at 2–4 week intervals.

Store in a cool, dry place away from direct sunlight. Intended for single-use only; safely discard the syringe after application.

Injection site reactions such as mild swelling, redness, bruising, and temporary "embossing" (small bumps) around the delicate eye area.

• Apply broad-spectrum sunscreen.
• Avoid direct UV exposure, saunas, hot tubs, and strenuous physical activities for a few days post-treatment.

• NAD+ (25%): Boosts cellular energy (ATP) and promotes DNA repair for intense skin renewal and vitality.
• PDRN (3%) & PN (1%): Accelerates tissue repair, healing, and skin renewal.
• Plant-derived Exosomes (3 Types): Delivers powerful regenerative signals to support structural repair.
• Atelocollagen (Hydrolyzed): Provides structural support and enhances skin elasticity.

Acts as an advanced multi-booster that reprograms the skin at the cellular level. By enhancing cellular energy (ATP production), it supports faster skin turnover, maximizes collagen synthesis, and delivers deep revitalization.

• Radiance & Glow: Reveals a fresh glow and enhances natural luminosity for a brighter complexion.
• Texture Refinement: Creates a smoother, more refined, and even-looking skin surface.
• Revitalization & Hydration: Provides deep hydration and healthier-looking skin with long-lasting regeneration.

Standard Cycle: 3–5 sessions spaced 1–2 weeks apart.
Onset of Effect: Initial hydration and glow appear within days. Optimal cellular repair and collagen effects become visible after 2–4 weeks.

Because it contains lyophilized exosomes and NAD+, the reconstituted solution must be used immediately and should not be saved or reused.

• Common Effects: Mild redness, swelling, or pinpoint bruising associated with the MTS or injection procedure.
• Post-Care: Apply soothing cream or masks. Strictly avoid direct sun exposure, saunas, and strenuous exercise for at least 24-48 hours. Apply sunscreen diligently.

It is a cellular renewal multi-booster for radiance and glow, texture refinement, and deep revitalization and hydration across the face, neck/décolleté, and hands.

NAD+ (25%), PDRN (3%) & PN (1%), plant-derived exosomes (3 types), and hydrolyzed atelocollagen.

Reconstitute the lyophilized exosome/NAD powder with the provided 6mL solvent, mixing thoroughly until fully dissolved before application; use the reconstituted solution immediately.

Strictly for professional medical/aesthetic use via MTS or intradermal micro-injections; do not inject intravascularly.

• PDRN (Sodium DNA): Extracted from salmon sperm. Highly compatible with human DNA for cell regeneration.
• Human Adipose-derived Stem Cell Extract: Contains nutrients and growth factors (EGF, FGF, HGF) to produce collagen.
• Hyaluronic Acid: Provides deep moisturization.

Functions as a "New Cell Repairing Factor." The ingredients optimize fibroblastic functions in the dermis, creating an ideal ecosystem to boost core cellular functions and activate tissue regeneration.

• Hydration: +132% improvement in moisture levels.
• Skin Elasticity: +103% improvement in firmness.
• Wrinkle Reduction: +72% reduction in wrinkles and fine lines.
• Tone & Texture: Enhances oil/water balance, softens skin, and provides a whitening effect.

1 Session = 5 Procedures over 3 months.
1st to 3rd Procedure: Spaced 1–2 weeks apart.
4th and 5th Procedure: Spaced 1 month apart (for maintenance).

Discard any remaining product within 7 days after opening due to the lack of preservatives. Keep away from direct sunlight.

• Mild redness, swelling, or pinpoint bleeding temporarily associated with the MTS/injection method. (PDRN is highly compatible with human DNA, minimizing immunological side effects).
• Apply soothing masks or regenerative creams post-procedure.
• Strict sun protection is required to prevent pigmentation during the healing phase.

It is a skin booster for total anti-aging and regeneration, improving hydration, elasticity, wrinkles, and tone on dull, sagging, and wrinkled facial skin.

PDRN (Sodium DNA from salmon sperm), Human Adipose-derived Stem Cell Extract with growth factors, and Hyaluronic Acid, within a composite of 43 active ingredients.

One session is 5 procedures over 3 months: the 1st to 3rd spaced 1–2 weeks apart, and the 4th and 5th spaced 1 month apart for maintenance.

For professional use only, applied via Mesotherapy injection or MTS under strict aseptic conditions since the formula is preservative-free.