Skin Firmness and Lifting

• PLLA (Poly-L-lactic acid): 400mg. Acts as a bio-stimulator triggering fibroblast activity for long-lasting neocollagenesis.
• H-HA (High-molecular-weight HA): 60mg.
• L-HA (Low-molecular-weight HA): 60mg. Provides immediate hydration and acts as a safe carrier/suspension agent for PLLA particles.

Microporous Sphere Technology: Utilizes spherical PLLA particles with internal pores, maximizing the surface area for higher collagen/elastin production and allowing for smoother injections. CMC & Mannitol Free: Uses HA instead of CMC/Mannitol for suspension, adding immediate volumizing impact.

• Deep Volume Replenishment: Immediate volumization (via HA) for large body areas.
• Collagenesis: Sustained stimulation and generation of collagen under the skin (via PLLA).
• Skin Improvement: Smoothing of skin texture, reduction of fine wrinkles, and improved elasticity.

Standard Cycle: 2 to 3 sessions at 1-month intervals.
Duration: Long-lasting PLLA effects maintained for up to 24 months.

To prevent the formation of subcutaneous nodules (granulomas), practitioners strictly recommend the "5-5-5 Rule" for patients: Massage the treated area for 5 minutes, 5 times a day, for 5 days post-treatment to ensure even particle distribution.

Collagenesis-Enabled Solubilized Active and Biodegradable Polymer technology enables PCL to be fully solubilized in water without microparticles, unlike traditional PCL fillers.

GOURI spreads naturally into the surrounding tissue due to its liquid nature and acts as a "Fundamental Anti-Aging" treatment. It biodegrades slowly while stimulating fibroblasts to synthesize new collagen (Neocollagenesis).

• Intense Collagenesis: Stimulation of the skin's natural collagen production.
• Skin Rejuvenation & Lifting: Improvements in skin elasticity, texture, and firmness.
• Wrinkle Reduction: Softens fine lines and deep wrinkles (e.g., crow's feet, marionette lines).
• Natural Volume: Restores volume loss gradually through natural collagen buildup.

Typically requires 2mL (2 syringes) per session for full-face coverage (1mL per side).

Can be safely used for the eye area due to its liquid spreadability.

Mild swelling (edema) is common for 2–3 days post-injection due to the collagenesis inflammatory response. Redness, bruising, or tenderness may occur.

• Avoid heavy makeup for 24 hours.
• Avoid sauna, alcohol, and strenuous exercise for 1 week.

What is GOURI used for?

GOURI is a liquid-type PCL injectable used as a fundamental anti-aging treatment. It stimulates natural collagen production, rejuvenates and lifts skin, softens fine lines and deep wrinkles, and restores natural volume gradually.

What is the key ingredient?

The key ingredient is Polycaprolactone (PCL) at 210mg/mL (21%), delivered as a fully solubilized, microparticle-free liquid using CESABP technology.

How long do results last?

Visual improvements often start within 1–2 weeks, and results typically last 6–12 months as the PCL degrades naturally. The standard cycle is 3 sessions spaced 4 weeks apart, with maintenance of 1–2 sessions every 6–12 months.

Who should administer GOURI?

GOURI is a Class III medical device administered by injection into the deep dermis to subcutaneous layer using a 30G to 35G needle, and should be administered by a qualified medical professional.

Who manufactures GOURI?

GOURI is manufactured by Dexlevo Inc.

Juveheal A features a dual growth factor action where EGF repairs the epidermis and FGF2 stimulates the dermis for improved skin density. Adenosine actively encourages collagen production to correct fine lines, while the Lotus water base provides deep hydration and soothing effects.

• Anti-Aging & Wrinkle Improvement: Specifically targets fine lines and deep wrinkles.
• Skin Vitality & Radiance: Restores a healthy glow to tired or aging skin.
• Elasticity Boost: Improves skin firmness and lifting effect.
• Deep Nutrition: Delivers concentrated nutrients to the skin layers.

Full face (especially areas with fine lines like eyes, forehead, nasolabial folds), Neck.

Ready-to-use liquid ampoule (tear off the plastic cap and aluminum seal to open).

Avoid direct sunlight, high temperature, and high humidity.

• Mild redness or irritation may occur, especially if used with MTS/microneedling (subsides within 1-2 days).

• Use a soothing mask (e.g., cooling sheet mask) after application.
• Apply sun protection.

What is Juveheal A used for?

Juveheal A is an anti-aging and wrinkle care ampoule. It targets fine lines and deep wrinkles, restores skin vitality and radiance, boosts elasticity and firmness, and delivers deep nutrition to the skin.

What are the key ingredients?

The primary active ingredients are Adenosine 0.04%, EGF (Rh-Oligopeptide-1), FGF2 (Rh-Polypeptide-1), and Hydrolyzed Collagen, with a Lotus Flower Water base.

How is it applied?

It is a ready-to-use liquid ampoule applied topically after cleansing. It is highly recommended for use with professional devices such as MTS, Derma Pen, or Electroporation to enhance absorption, typically 1 session per week.

Who should administer Juveheal A?

Juveheal A is for external (topical) use only. For enhanced absorption it is used with professional devices such as MTS, Derma Pen, or Electroporation under professional guidance.

Who manufactures Juveheal A?

Juveheal A is manufactured by J MEDICAL Inter Co., Ltd.

• Hyaluronic Acid (HA): 64mg/2mL (32mg High MW + 32mg Low MW)
• Succinic Acid: 16mg (1.6%) – Antioxidant & Anti-inflammatory
• Peptide Complex: Tripeptide-29 (Collagen Type I stimulation)

This high-concentration HA formula acts as a scaffold for immediate deep hydration (Bio-remodeling). Simultaneously, Succinic Acid activates mitochondrial energy to reduce inflammation, while Tripeptide-29 specifically targets collagen upregulation to restore elasticity.

• Deep Hydration & Glow: Restores moisture balance in dehydrated skin.
• Lifting & Tightening: Improves skin laxity via bio-remodeling.
• Anti-Inflammatory: Succinic Acid reduces redness, suitable for sensitive skin.
• Wrinkle Reduction: Smoothes fine lines and improves texture.

Ready-to-use pre-filled syringe; no mixing required.

EVEHILO is positioned as an advanced bio-remodeler alternative to products like Profhilo. It differentiates itself by incorporating Succinic Acid for brightening and anti-inflammatory benefits, alongside Tripeptide-29 for enhanced collagen stimulation.

Best for patients requiring both structural lifting/tightening and skin quality improvement (treating acne scars, pigmentation, or dullness).

Store in a cool, dry place away from direct sunlight. Do not freeze. Single-use only.

• Mild redness, swelling, or localized bumps (papules) at injection points (usually resolve within 24–48 hours).
• Bruising may occur.

• Avoid heavy makeup for 12 hours.
• Avoid saunas, steam rooms, and intense exercise for a few days.

It is used for deep hydration and glow, lifting and tightening via bio-remodeling, anti-inflammatory benefits for sensitive skin, and wrinkle reduction with texture improvement.

Its primary active ingredients are Hyaluronic Acid (HA) 64mg/2mL (32mg High MW + 32mg Low MW), Succinic Acid 16mg (1.6%), and a peptide complex featuring Tripeptide-29.

Visible improvement appears in 1–2 weeks and effects last 6–9 months. An initial course of 2 treatments spaced 4 weeks apart is recommended.

It is for professional use only and should be administered by a qualified practitioner.

EVEHILO is associated with Celesta Korea / BS Pharm.

A synergistic effect of Hydration (HA), Regeneration (PDRN), and Cellular Recharging (NAD+). It acts as a bio-stimulator to activate the skin's natural healing and energy production cycles.

• Deep Hydration & Glow: Provides an instant moisture boost and "water glow" radiance.
• Skin Regeneration: Repairs damaged skin barrier and improves texture.
• Cellular Energy: NAD+ boosts ATP production for enhanced cell renewal.
• Anti-Aging: Softens fine lines, improves elasticity, and tightens pores.

Rejuva Healer S is marketed as a 4th Generation Skin Booster. It eliminates the need to layer multiple products by combining the benefits of HA (1st Gen), PDRN (2nd Gen), and Exosomes (3rd Gen) with the added cellular energy boost of NAD+.

What is Rejuva Healer S used for?

Rejuva Healer S is a 4th generation NAD+ skin booster used for deep hydration and glow, skin regeneration and barrier repair, cellular energy boosting, and anti-aging (softening fine lines, improving elasticity, and tightening pores).

What are the key ingredients?

The primary active ingredients are PDRN 2% (Salmon DNA), Hyaluronic Acid 17mg/mL (non-crosslinked), and NAD+ (Nicotinamide Adenine Dinucleotide).

How long do results last?

Hydration and glow are visible immediately after the 1st session, while texture, pore, and elasticity improvements become prominent after the 3rd session. The standard cycle is 3 to 5 sessions spaced 2–3 weeks apart.

Who should administer Rejuva Healer S?

It is for external/professional use only and is administered by injection (papule or nappage technique) using a 30G × 4mm or 32G needle, and should be administered by a qualified professional.

Who manufactures Rejuva Healer S?

Rejuva Healer S is supplied by Phace Global / Esta Global.

• HA (H-HA & L-HA): 100.00mg Total. Deep hydration and metabolic stimulation.
• Sodium Succinate: 80.50mg. Synergizes with HA for intense moisture.
• PDRN & PN: 6.00mg Total (Increased concentration). Accelerates cell renewal and collagen generation.
• RH Collagen: 1.50mg. Directly supplements structural proteins for immediate firming.
• NAD+: Boosts cellular energy (ATP) and repairs DNA.
• Glutathione & Tranexamic Acid: Inhibits melanin synthesis and provides overall skin brightening.

Acts as a complete "Skin Vitalizer". It delivers a comprehensive anti-aging, whitening, and regenerating effect in a single, ready-to-use syringe without leaving any residues in the body.

• Brightening & Lightening: Significantly fades dark spots, pigmentation, and brightens skin tone.
• Anti-Aging & Firming: Stimulates collagen generation, reduces fine wrinkles, and improves skin elasticity.
• Hydration & Volume: Replenishes volume, provides a lifting effect, and enhances skin compliance.
• Rejuvenation & Repair: Rejuvenates under-eye areas, reinforces the skin barrier, and accelerates wound healing.

Cycle: 2-3 treatments at 1-month intervals.
Duration: Volume replenishment and skin rejuvenation effects maintain for 4 to 8 months.

Typically 24–36 months from the manufacturing date (unopened). Single-use only; strictly discard any remaining product after use.

• Side Effects: Mild swelling, redness, bruising, tenderness, or temporary papules at the injection sites.
• Post-Care: Apply sunscreen regularly. Avoid heavy makeup immediately after the procedure, and refrain from exposure to extreme heat (saunas) or strenuous exercise during the initial recovery period.

It is a multi-functional skin booster ("Skin Vitalizer") for brightening, anti-aging and firming, hydration and volume, and skin rejuvenation and repair.

HA (H-HA & L-HA, 100.00mg), Sodium Succinate (80.50mg), PDRN & PN (6.00mg), RH Collagen (1.50mg), NAD+, and Glutathione & Tranexamic Acid.

It is a ready-to-use pre-filled syringe requiring no mixing with saline. A cycle of 2-3 treatments at 1-month intervals gives effects lasting 4 to 8 months.

Strictly for professional medical use; injected subcutaneously or into the deep dermis by a trained medical professional, never intravascularly.

It is manufactured by Healink Korea.

• Lecithin: Natural emulsifier that disrupts fat cell membranes.
• Riboflavin (Vitamin B2): Activates fat metabolism (turns fat into energy) and provides anti-inflammatory benefits.
• Bromelain: Pineapple-derived enzyme for protein breakdown, reducing swelling and inflammation.

• Peptides: Acetyl Hexapeptide-8, Palmitoyl Pentapeptide-4, Palmitoyl Tetrapeptide-7 (Skin firming).
• Antioxidants: Glutathione, Ascorbic Acid, Carnitine, Adenosine.
• Natural Extracts: Centella Asiatica, Chamomilla, Salvia, Scutellaria.

Step 1: Lecithin disrupts fat cells. Step 2: Riboflavin boosts metabolism of released fat. Step 3: Bromelain supports drainage and reduces swelling.

• Dual Action: Fat reduction combined with skin firming to prevent sagging.
• Contouring: Defines facial and body lines by removing stubborn fat.
• Reduced Downtime: Formulated to cause minimal pain and swelling compared to traditional PPC.
• Brightening: Improves skin tone via Riboflavin.

Ready-to-use solution. Can be mixed with small amounts of Lidocaine if needed for comfort.

LipoLume is positioned as a painless, no-swelling alternative to traditional PPC lipolytics. It is ideal for patients who require effective fat reduction but are concerned about downtime or inflammation.

LipoLume is an advanced lipolytic solution for fat reduction and facial and body contouring, targeting areas such as the double chin, jawline, abdomen, love handles, arms, and thighs.

The primary active ingredients are Lecithin (which disrupts fat cell membranes), Riboflavin / Vitamin B2 (which activates fat metabolism), and Bromelain (a pineapple-derived enzyme that reduces swelling and inflammation).

LipoLume is administered by subcutaneous injection, with a treatment cycle of 3–5 sessions spaced 7–10 days apart. It is a ready-to-use solution that can be mixed with small amounts of Lidocaine if needed for comfort.

LipoLume is manufactured by Phace Global Co., Ltd.

Breaks down within the body at a constant form to provide temporal reduction of facial wrinkles.

High purity formulation that triggers no immune response. Officially classified as a medical device.

• Improvement of skin elasticity, anti-aging, and skin brightening.
• Hydration and moisturization.
• Reduces sebum production and oil secretion.
• Provides a glowing effect and revitalizes collagen.

Forehead lines, glabella frown lines (11's), crow's feet, under eye lines, smile lines, marionette lines (prejowl), and platysmal neck rings.

Store in a cool, dry place away from direct sunlight. Strictly for single-use application; safely discard the syringe and needle after use.

Injection site reactions such as mild swelling, redness, bruising, tenderness, and temporary "embossing" (small bumps at the injection points).

• Apply broad-spectrum sunscreen diligently.
• Avoid direct UV exposure, extreme heat (e.g., saunas, hot tubs), and strenuous workouts for at least 48 hours to prevent infection and prolonged swelling.

• PLLA (Poly-L-Lactic Acid): Derived from Alpha Hydroxy Acid, specifically sourced from plant-based materials like corn and sugarcane.
• CMC (Carboxymethylcellulose): Provides immediate volume upon injection.

Dual-Action Formula: CMC provides instant volume and smoothing upon injection. Over time, PLLA gradually breaks down to stimulate natural collagen regeneration (neocollagenesis). PLLA is completely metabolized by the body into carbon dioxide, water, and simple sugars, leaving no residue behind.

• Immediate plumping and smoothing of the skin via CMC.
• Long-term skin rejuvenation and progressive collagen regeneration via PLLA.
• Restoration of facial and body structure with improved skin elasticity and firmness.

Immediate visible volume from CMC. Natural collagen generation develops over several months, with results lasting up to 2 years.

Typically 24-36 months from the manufacturing date. Single-use vial only; discard any remaining product immediately after use.

• Avoid using the sauna, swimming pool, or gym for at least 7 days after treatment.
• Avoid vigorous facial treatments or massages for 2 weeks post-injection (except for the prescribed 5-5-5 gentle massage).
• Maintain a healthy lifestyle to support optimal collagen production.

It is a collagen biostimulator for immediate plumping and long-term skin rejuvenation, restoring facial and body structure with improved elasticity and firmness.

PLLA (Poly-L-Lactic Acid), a plant-based collagen stimulator sourced from corn and sugarcane, combined with CMC (Carboxymethylcellulose) for immediate volume.

Rejuva Lume is a lyophilized powder and must be reconstituted before use: add Sterile Water for Injection and agitate until a uniform, lump-free suspension forms, following the dilution volume and hydration time in the manufacturer's Instructions for Use.

There is immediate visible volume from CMC, while natural collagen generation develops over several months, with results lasting up to 2 years.

Strictly for professional medical use, injected subcutaneously or into the deep dermis with an 18G cannula or 25-27G needle; do not inject intravascularly.

It is manufactured by Phace Global Co., Ltd.

• PLLA (Poly-L-lactic acid): 200mg. Acts as a bio-stimulator triggering fibroblast activity for long-lasting neocollagenesis.
• H-HA (High-molecular-weight HA): 30mg.
• L-HA (Low-molecular-weight HA): 30mg. Provides immediate hydration and acts as a carrier/suspension agent for PLLA.

Microporous Sphere Technology: Utilizes spherical PLLA particles with internal pores, maximizing the surface area for higher collagen/elastin production and allowing for smoother, less painful injections. CMC & Mannitol Free: Uses HA instead for suspension, adding hydration benefits.

• Dual Volumization: Immediate volumizing effect from HA, followed by sustained neocollagenesis from PLLA.
• Collagenesis: Active stimulation and generation of collagen and elastin under the skin.
• Wrinkle Reduction: Effectively reduces fine lines and deep wrinkles.
• Skin Improvement: Enhances skin hydration, elasticity, compliance, and smooths overall texture.

Standard Cycle: 2 to 3 sessions at 1-month intervals.
Duration: Long-lasting PLLA effects maintained for up to 24 months.

To prevent the formation of subcutaneous nodules (granulomas), practitioners strictly recommend the "5-5-5 Rule" for patients: Massage the treated area for 5 minutes, 5 times a day, for 5 days post-treatment to ensure even particle distribution.