Skin Firmness and Lifting

A Dual-Action system where HA provides immediate deep hydration and plumping, while PDRN enhances cellular regeneration, DNA synthesis, and tissue repair (anti-inflammatory).

• Deep Hydration & Glow: Instantly hydrated skin with a natural radiant glow.
• Skin Regeneration: Repairs damaged skin barrier and improves overall skin health.
• Texture & Pores: Smoothes skin texture and tightens enlarged pores.
• Anti-Aging: Improves elasticity and firmness while softening fine lines.
• Tone Correction: Brighter, more even skin tone with reduced redness.

Single-use vials. Discard any remaining solution immediately after opening.

Mild swelling, redness, or papules (bumps) at injection sites are common and typically resolve within 24–48 hours.

It is a skin booster for deep hydration, skin regeneration, texture and pore improvement, and anti-aging on the full face, especially dry, dull, or sensitive skin.

PDRN 2% (Salmon DNA) and non-crosslinked Hyaluronic Acid 17mg/mL, working as a dual-action system for hydration and cellular repair.

Instant glow after Session 1, visible pore tightening and elasticity boost by Session 3, and full rejuvenation effects by Session 5 (5 sessions, 2 weeks apart).

For external/professional use only, applied via papule injection or microneedling (MTS) by a qualified practitioner.

It is manufactured by Phace Global Co., Ltd.

• Lecithin: Natural emulsifier that disrupts fat cell membranes.
• Riboflavin (Vitamin B2): Activates fat metabolism (turns fat into energy) and provides anti-inflammatory benefits.
• Bromelain: Pineapple-derived enzyme for protein breakdown, reducing swelling and inflammation.

• Peptides: Acetyl Hexapeptide-8, Palmitoyl Pentapeptide-4, Palmitoyl Tetrapeptide-7 (Skin firming).
• Antioxidants: Glutathione, Ascorbic Acid, Carnitine, Adenosine.
• Natural Extracts: Centella Asiatica, Chamomilla, Salvia, Scutellaria.

Step 1: Lecithin disrupts fat cells. Step 2: Riboflavin boosts metabolism of released fat. Step 3: Bromelain supports drainage and reduces swelling.

• Dual Action: Fat reduction combined with skin firming to prevent sagging.
• Contouring: Defines facial and body lines by removing stubborn fat.
• Reduced Downtime: Formulated to cause minimal pain and swelling compared to traditional PPC.
• Brightening: Improves skin tone via Riboflavin.

Ready-to-use solution. Can be mixed with small amounts of Lidocaine if needed for comfort.

LipoLume is positioned as a painless, no-swelling alternative to traditional PPC lipolytics. It is ideal for patients who require effective fat reduction but are concerned about downtime or inflammation.

LipoLume is an advanced lipolytic solution for fat reduction and facial and body contouring, targeting areas such as the double chin, jawline, abdomen, love handles, arms, and thighs.

The primary active ingredients are Lecithin (which disrupts fat cell membranes), Riboflavin / Vitamin B2 (which activates fat metabolism), and Bromelain (a pineapple-derived enzyme that reduces swelling and inflammation).

LipoLume is administered by subcutaneous injection, with a treatment cycle of 3–5 sessions spaced 7–10 days apart. It is a ready-to-use solution that can be mixed with small amounts of Lidocaine if needed for comfort.

LipoLume is manufactured by Phace Global Co., Ltd.

• Hyaluronic Acid (HA): 64mg/2mL (32mg High MW + 32mg Low MW)
• Succinic Acid: 16mg (1.6%) – Antioxidant & Anti-inflammatory
• Peptide Complex: Tripeptide-29 (Collagen Type I stimulation)

This high-concentration HA formula acts as a scaffold for immediate deep hydration (Bio-remodeling). Simultaneously, Succinic Acid activates mitochondrial energy to reduce inflammation, while Tripeptide-29 specifically targets collagen upregulation to restore elasticity.

• Deep Hydration & Glow: Restores moisture balance in dehydrated skin.
• Lifting & Tightening: Improves skin laxity via bio-remodeling.
• Anti-Inflammatory: Succinic Acid reduces redness, suitable for sensitive skin.
• Wrinkle Reduction: Smoothes fine lines and improves texture.

Ready-to-use pre-filled syringe; no mixing required.

EVEHILO is positioned as an advanced bio-remodeler alternative to products like Profhilo. It differentiates itself by incorporating Succinic Acid for brightening and anti-inflammatory benefits, alongside Tripeptide-29 for enhanced collagen stimulation.

Best for patients requiring both structural lifting/tightening and skin quality improvement (treating acne scars, pigmentation, or dullness).

Store in a cool, dry place away from direct sunlight. Do not freeze. Single-use only.

• Mild redness, swelling, or localized bumps (papules) at injection points (usually resolve within 24–48 hours).
• Bruising may occur.

• Avoid heavy makeup for 12 hours.
• Avoid saunas, steam rooms, and intense exercise for a few days.

It is used for deep hydration and glow, lifting and tightening via bio-remodeling, anti-inflammatory benefits for sensitive skin, and wrinkle reduction with texture improvement.

Its primary active ingredients are Hyaluronic Acid (HA) 64mg/2mL (32mg High MW + 32mg Low MW), Succinic Acid 16mg (1.6%), and a peptide complex featuring Tripeptide-29.

Visible improvement appears in 1–2 weeks and effects last 6–9 months. An initial course of 2 treatments spaced 4 weeks apart is recommended.

It is for professional use only and should be administered by a qualified practitioner.

EVEHILO is associated with Celesta Korea / BS Pharm.

Breaks down within the body at a constant form to provide temporal reduction of facial wrinkles.

High purity formulation that triggers no immune response. Officially classified as a medical device.

• Improvement of skin elasticity, anti-aging, and skin brightening.
• Hydration and moisturization.
• Reduces sebum production and oil secretion.
• Provides a glowing effect and revitalizes collagen.

Forehead lines, glabella frown lines (11's), crow's feet, under eye lines, smile lines, marionette lines (prejowl), and platysmal neck rings.

Store in a cool, dry place away from direct sunlight. Strictly for single-use application; safely discard the syringe and needle after use.

Injection site reactions such as mild swelling, redness, bruising, tenderness, and temporary "embossing" (small bumps at the injection points).

• Apply broad-spectrum sunscreen diligently.
• Avoid direct UV exposure, extreme heat (e.g., saunas, hot tubs), and strenuous workouts for at least 48 hours to prevent infection and prolonged swelling.

• 1 Cellular Signaling: GHK-Cu participates in cellular signaling pathways, modulating gene expression related to skin repair and regeneration.
• 2 Fibroblast Activation & ECM Synthesis: Promotes fibroblast activity and stimulates extracellular matrix (ECM) production for structural skin renewal.
• 3 Matrix Organization: Supports the synthesis of collagen, elastin, and glycosaminoglycans (GAG) to restore dermal density, firmness, and elasticity.

• Brighter skin tone and healthy, luminous glow
• Improved skin firmness and elasticity
• Deep hydration and overall skin conditioning
• Antioxidant defense and barrier recovery
• Skin remodeling and extracellular matrix maintenance

• Use opened vials promptly.
• Discard any unused, opened product in accordance with standard single-use vial practice.

• 1 Avoid direct sun exposure for a short period following treatment.
• 2 Avoid saunas and intense heat for a short period following treatment.
• 3 Avoid vigorous massage of the treated area immediately after the procedure.

The formula provides anti-apoptosis, anti-melanogenesis, anti-osteonecrosis, wound healing, anti-inflammation, tissue damage prevention, and bone regeneration effects. It utilizes DNA-based ingredients to reconstruct the dermal matrix and repair damaged cells. The released PN significantly stimulates the migration of human dermal fibroblasts, which plays a crucial role in tissue wound repair.

Addresses the root causes of aging by promoting skin regeneration and increasing dermal density, ultimately boosting collagen production.

• Improves overall skin tone, leaving it visibly brighter and smoother.
• Deeply moisturizes the skin with nourishing ingredients to maintain optimal hydration levels.
• Minimizes the appearance of pores by enhancing skin elasticity and hydration.
• Reduces roughness and pore volume while improving fine wrinkles and overall skin texture.

Specifically designed to target fine lines and loss of elasticity around the eyes.

Standard PN eye boosters generally recommend 3–4 sessions at 2–4 week intervals.

Store in a cool, dry place away from direct sunlight. Intended for single-use only; safely discard the syringe after application.

Injection site reactions such as mild swelling, redness, bruising, and temporary "embossing" (small bumps) around the delicate eye area.

• Apply broad-spectrum sunscreen.
• Avoid direct UV exposure, saunas, hot tubs, and strenuous physical activities for a few days post-treatment.

• PDRN (Sodium DNA): Extracted from salmon sperm. Highly compatible with human DNA for cell regeneration.
• Human Adipose-derived Stem Cell Extract: Contains nutrients and growth factors (EGF, FGF, HGF) to produce collagen.
• Hyaluronic Acid: Provides deep moisturization.

Functions as a "New Cell Repairing Factor." The ingredients optimize fibroblastic functions in the dermis, creating an ideal ecosystem to boost core cellular functions and activate tissue regeneration.

• Hydration: +132% improvement in moisture levels.
• Skin Elasticity: +103% improvement in firmness.
• Wrinkle Reduction: +72% reduction in wrinkles and fine lines.
• Tone & Texture: Enhances oil/water balance, softens skin, and provides a whitening effect.

1 Session = 5 Procedures over 3 months.
1st to 3rd Procedure: Spaced 1–2 weeks apart.
4th and 5th Procedure: Spaced 1 month apart (for maintenance).

Discard any remaining product within 7 days after opening due to the lack of preservatives. Keep away from direct sunlight.

• Mild redness, swelling, or pinpoint bleeding temporarily associated with the MTS/injection method. (PDRN is highly compatible with human DNA, minimizing immunological side effects).
• Apply soothing masks or regenerative creams post-procedure.
• Strict sun protection is required to prevent pigmentation during the healing phase.

It is a skin booster for total anti-aging and regeneration, improving hydration, elasticity, wrinkles, and tone on dull, sagging, and wrinkled facial skin.

PDRN (Sodium DNA from salmon sperm), Human Adipose-derived Stem Cell Extract with growth factors, and Hyaluronic Acid, within a composite of 43 active ingredients.

One session is 5 procedures over 3 months: the 1st to 3rd spaced 1–2 weeks apart, and the 4th and 5th spaced 1 month apart for maintenance.

For professional use only, applied via Mesotherapy injection or MTS under strict aseptic conditions since the formula is preservative-free.

• 1 Immediate (CMC Phase): Immediately after injection, the dermis layer is filled with CMC gel, providing instant volume and supporting the surrounding tissue.
• 2 Long-term (PLA Phase): As the CMC gel is gradually absorbed and dissolved, the PLA microspheres remain in place and stimulate cells to produce new collagen — delivering natural wrinkle improvement from the inside out.

• HMT (Homologous Microsphere Technology): Creates perfectly spherical and uniform PLA particles precisely sized at 30–50 µm for consistent, predictable results.
• High Molecular Weight: 190,000–250,000 Da — ensures structural integrity and sustained collagen stimulation over time.
• Eco-Friendly & Biodegradable: No BDDE residue. PLA material fully degrades within 1–2 years.

• Acts as a natural collagen stimulator to dramatically restore volume
• Improves deep wrinkles and gradually rejuvenates overall skin texture
• Delivers dual-phase action: immediate volumizing followed by sustained collagen regeneration

• 1 Add 1.4 mL of WFI (Water For Injection) to the vial.
• 2 Allow to dissolve at room temperature. Standard dissolution time is approximately 1 hour (full dissolution confirmed within 60–90 minutes).
• 3 Confirm beads are completely dissolved before proceeding to injection to ensure even particle suspension.

• Do not freeze.
• Must be properly reconstituted prior to injection to ensure even particle suspension.

• PLLA: Stimulates natural collagen production from within, enhancing volume and visibly reducing wrinkles over time.
• PN (Polynucleotide / Sodium DNA): Supports skin healing, tissue repair, and cell renewal with high biocompatibility.
• Sodium Hyaluronate: Provides intense moisture, aids regeneration, and reinforces the skin barrier function.
• Glutathione & Vitamin C: Protect against oxidative stress, deliver a brightening effect, and help prevent melanogenesis (melanin production inhibition).

• Optimized particle shape reduces the risk of nodules and granulomas, with a consistent particle size of 30–80 µm to help prevent inflammation.
• Manufactured using advanced preserving technology — formulated without parabens, harsh preservatives, or fragrances.

• Biostimulates collagen production and repairs skin tissue
• Restores volume and deeply hydrates from within
• Brightens complexion and reduces fine lines and acne marks
• Improves overall firmness, skin elasticity, and provides a radiant, youthful glow

• After 1st session: Visible improvements in skin texture, hydration, and brightening.
• After subsequent sessions: Cumulative effects on firmness, fine lines, and collagen restoration.

• 1 Add 4–6 cc of sterilized water to the dry pink powder in the vial.
• 2 Shake thoroughly to ensure even distribution of the powder.
• 3 Leave to set for 2–3 minutes before application.

• Protect from direct sunlight and excessive heat.
• Do not freeze.

• Avoid excessive heat exposure and UV until initial swelling has fully resolved.
• Follow standard post-care protocols for injectable treatments.

PLLA microparticles stimulate the body's natural collagen production (neocollagenesis) by activating fibroblasts. As the PLLA is gradually absorbed and metabolized by the body, the newly formed collagen restores lost facial volume and improves overall skin elasticity.

Composed of a biodegradable and biocompatible synthetic polymer designed to act as a biostimulator rather than a traditional volumizing filler.

• Gradual and natural-looking volume restoration.
• Deep wrinkle correction.
• Long-term collagen regeneration.
• Improvement of overall skin tone and texture.

Facial contouring, deep wrinkles (e.g., nasolabial folds, marionette lines), sunken cheeks, temples, and jawline.

Results appear gradually over 4 to 6 weeks as new collagen is synthesized. The volumizing and rejuvenating effects are long-lasting, typically persisting for 18 to 24 months.

Store in a cool, dry place away from direct sunlight. Once reconstituted, the product should be used within the recommended timeframe according to standard PLLA protocols.

Patients are typically advised to massage the treated area gently for 5 minutes, 5 times a day, for 5 days to ensure even product distribution and prevent the formation of subcutaneous nodules.

Mild swelling, bruising, redness, and tenderness at the injection sites.

It is a PLLA collagen biostimulator for gradual, natural-looking volume restoration, deep wrinkle correction, and long-term collagen regeneration for facial contouring.

Poly-L-Lactic Acid (PLLA), a biodegradable, biocompatible synthetic polymer that stimulates the body's natural collagen production (neocollagenesis).

It requires proper reconstitution with Sterile Water for Injection (SWFI) prior to the procedure to ensure an even suspension of PLLA particles.

Strictly for professional medical use, via deep dermal or subcutaneous injection; do not inject intravascularly or into the superficial epidermis.

High-purity HA attracts water molecules to the dermis, restoring moisture balance immediately while stimulating fibroblasts to promote endogenous collagen synthesis.

• Intensive Moisturizing: Restores dry and dehydrated skin (Hydro-lifting).
• Skin Rejuvenation: Improves overall skin radiance and brightness (Glow effect).
• Texture Improvement: Tightens pores and smoothes fine lines/wrinkles.
• Elasticity Restoration: Enhances skin firmness through collagen stimulation.

Supplied as ready-to-use pre-filled syringes. No mixing required.

Store away from direct sunlight. Do not freeze. Do not use if the package is damaged.

• Mild redness (erythema) or swelling
• Bruising or tenderness at the injection site
• Symptoms usually resolve within 1–3 days

• Avoid heavy makeup for at least 24 hours.
• Avoid saunas, steam rooms, and excessive heat for 1 week.
• Apply sunscreen diligently.

It is used for intensive moisturizing (hydro-lifting), skin rejuvenation and radiance, texture improvement with pore tightening and fine-line smoothing, and elasticity restoration through collagen stimulation.

Its primary active ingredient is Hyaluronic Acid (HA) 15mg/mL (1.5%), buffered with Phosphate Buffered Saline (PBS) pH 7.0.

Visible improvement appears in 1–2 weeks and effects last 3–6 months. A course of 3–4 sessions at 2–3 week intervals is recommended.

It is a medical device for use by licensed practitioners only and should be administered by a qualified professional.

REGENOVUE Aqua Shine is manufactured by NeoGenesis Co., Ltd.

• Brightening and whitening — inhibits melanin production for a more even, radiant skin tone
• Deep moisturizing and skin barrier reinforcement
• Wrinkle improvement and skin regeneration
• Strong antioxidant defense against environmental stressors
• General facial brightening, moisturizing, and anti-wrinkle skin conditioning

Apply topically to the facial skin. Effective as a standalone topical treatment — no special MTS (microneedling) procedure is required. Microneedling may optionally be paired for enhanced product absorption at the practitioner's discretion.

• Hyaluronic Acid: Provides intense skin hydration and a sustained moisturizing effect throughout the dermis.
• Glutathione & Coenzymes: Deliver strong antioxidant action and a visible whitening effect by inhibiting melanin production.
• Stem Cells & Exosomes (500 million particles): Exert an excellent effect on skin regeneration and strengthen the skin barrier at a cellular level.
• Amino Acids: Stimulate collagen production to provide firm elasticity and improved skin structure.
• Minerals: Activate cellular metabolism to support overall skin vitality and recovery.

• Revitalizes dull skin and provides deep, lasting hydration
• Strengthens the skin barrier and promotes rapid cell regeneration
• Enhances skin elasticity and firmness
• Delivers strong whitening and antioxidant protection
• Effectively repairs damaged cells and accelerates skin recovery

• Protect from direct sunlight.
• Do not freeze.

• 1 Avoid intense heat sources — saunas and prolonged direct sun exposure — for 24–48 hours post-treatment.
• 2 Avoid strenuous exercise for 24–48 hours post-treatment.

• Barrier Formation: PN forms a physical barrier on the skin to block environmental stressors and maintain optimal moisture levels.
• Fibroblast Activation: Activates fibroblasts to stimulate collagen synthesis, restoring skin structure and elasticity from within.
• Anti-inflammatory Action: Provides anti-inflammatory support to improve the overall skin environment and support tissue recovery.

• Restores oil-water balance and reduces sebum secretion for improved skin texture
• Replenishes elastic fibers including collagen, enhancing the skin's self-healing capacity
• Promotes wound and scar healing
• Effectively improves dryness, pigmentation, wrinkles, and skin sagging

Provides an extended maintenance and retention period attributed to the long DNA chain structure of the PN, which slows degradation and prolongs efficacy in the skin.