Skin Recovery and Regeneration

A synergistic effect of Hydration (HA), Regeneration (PDRN), and Cellular Recharging (NAD+). It acts as a bio-stimulator to activate the skin's natural healing and energy production cycles.

• Deep Hydration & Glow: Provides an instant moisture boost and "water glow" radiance.
• Skin Regeneration: Repairs damaged skin barrier and improves texture.
• Cellular Energy: NAD+ boosts ATP production for enhanced cell renewal.
• Anti-Aging: Softens fine lines, improves elasticity, and tightens pores.

Rejuva Healer S is marketed as a 4th Generation Skin Booster. It eliminates the need to layer multiple products by combining the benefits of HA (1st Gen), PDRN (2nd Gen), and Exosomes (3rd Gen) with the added cellular energy boost of NAD+.

What is Rejuva Healer S used for?

Rejuva Healer S is a 4th generation NAD+ skin booster used for deep hydration and glow, skin regeneration and barrier repair, cellular energy boosting, and anti-aging (softening fine lines, improving elasticity, and tightening pores).

What are the key ingredients?

The primary active ingredients are PDRN 2% (Salmon DNA), Hyaluronic Acid 17mg/mL (non-crosslinked), and NAD+ (Nicotinamide Adenine Dinucleotide).

How long do results last?

Hydration and glow are visible immediately after the 1st session, while texture, pore, and elasticity improvements become prominent after the 3rd session. The standard cycle is 3 to 5 sessions spaced 2–3 weeks apart.

Who should administer Rejuva Healer S?

It is for external/professional use only and is administered by injection (papule or nappage technique) using a 30G × 4mm or 32G needle, and should be administered by a qualified professional.

Who manufactures Rejuva Healer S?

Rejuva Healer S is supplied by Phace Global / Esta Global.

Juveheal V uses ICT (Intracellular Transduction) Technology to enhance the penetration of its complex formula into skin cells. It creates an ideal environment for fibroblast activation, regenerating skin components and providing intense hydration for a "Water Glow" effect.

• Radiance & Glow: Instantly improves skin tone and luminosity (Gwangchae).
• Deep Hydration: Restores moisture balance and treats inner dryness with high-dose HA.
• Vitality & Rejuvenation: Revitalizes tired, dull skin and improves overall skin health.
• Barrier Reinforcement: Strengthens the skin's natural defense system.

Full face, specifically for dull, dehydrated, or tired-looking skin.

Remove the flip-off cap and aluminum seal; apply using a dropper or syringe.

Store in a cool, shaded place away from direct sunlight.

• Mild redness or irritation may occur immediately after MTS application but typically subsides within 24 hours.

• Apply a soothing mask and sunscreen.
• Avoid heavy makeup for 24 hours.

What is Juveheal V used for?

Juveheal V is a vitality and radiance ampoule. It improves skin tone and luminosity, provides deep hydration with high-dose HA, revitalizes tired and dull skin, and reinforces the skin barrier for a Water Glow effect.

What are the key ingredients?

The primary active ingredients are High Concentration HA (3,500ppm), Multi-Growth Factors (EGF, FGF, VEGF, IGF), and a Multi-Ingredient Complex of 60+ active ingredients including PDRN.

How is it applied?

It is applied topically and optimized for use with MTS, Derma Pen, or Derma Stamp to facilitate deep absorption. The recommended course is 3 to 5 sessions total, 1 session every 1–2 weeks.

Who should administer Juveheal V?

Juveheal V is for external/cosmetic microneedling use only. For deep absorption it is used with professional devices such as MTS, Derma Pen, or Derma Stamp under professional guidance.

Who manufactures Juveheal V?

Juveheal V is manufactured by J MEDICAL Inter Co., Ltd.

• HA (H-HA & L-HA): 100.00mg Total. Deep hydration and metabolic stimulation.
• Sodium Succinate: 80.50mg. Synergizes with HA for intense moisture.
• PDRN & PN: 6.00mg Total (Increased concentration). Accelerates cell renewal and collagen generation.
• RH Collagen: 1.50mg. Directly supplements structural proteins for immediate firming.
• NAD+: Boosts cellular energy (ATP) and repairs DNA.
• Glutathione & Tranexamic Acid: Inhibits melanin synthesis and provides overall skin brightening.

Acts as a complete "Skin Vitalizer". It delivers a comprehensive anti-aging, whitening, and regenerating effect in a single, ready-to-use syringe without leaving any residues in the body.

• Brightening & Lightening: Significantly fades dark spots, pigmentation, and brightens skin tone.
• Anti-Aging & Firming: Stimulates collagen generation, reduces fine wrinkles, and improves skin elasticity.
• Hydration & Volume: Replenishes volume, provides a lifting effect, and enhances skin compliance.
• Rejuvenation & Repair: Rejuvenates under-eye areas, reinforces the skin barrier, and accelerates wound healing.

Cycle: 2-3 treatments at 1-month intervals.
Duration: Volume replenishment and skin rejuvenation effects maintain for 4 to 8 months.

Typically 24–36 months from the manufacturing date (unopened). Single-use only; strictly discard any remaining product after use.

• Side Effects: Mild swelling, redness, bruising, tenderness, or temporary papules at the injection sites.
• Post-Care: Apply sunscreen regularly. Avoid heavy makeup immediately after the procedure, and refrain from exposure to extreme heat (saunas) or strenuous exercise during the initial recovery period.

It is a multi-functional skin booster ("Skin Vitalizer") for brightening, anti-aging and firming, hydration and volume, and skin rejuvenation and repair.

HA (H-HA & L-HA, 100.00mg), Sodium Succinate (80.50mg), PDRN & PN (6.00mg), RH Collagen (1.50mg), NAD+, and Glutathione & Tranexamic Acid.

It is a ready-to-use pre-filled syringe requiring no mixing with saline. A cycle of 2-3 treatments at 1-month intervals gives effects lasting 4 to 8 months.

Strictly for professional medical use; injected subcutaneously or into the deep dermis by a trained medical professional, never intravascularly.

It is manufactured by Healink Korea.

• HA (H-HA & L-HA): 192.00mg Total. Provides deep/surface hydration and blocks free radicals.
• Sodium Succinate: 96.00mg. Reinforces the skin barrier and stimulates metabolic processes.
• PDRN & PN: 5.00mg Total. Stimulates fibroblasts, accelerates cell renewal, and boosts wound healing.
• NAD+: Boosts cellular energy (ATP), promotes DNA repair, and targets senescent cells.
• Glutathione & Tranexamic Acid: Inhibits melanin, fades dark spots, and provides strong brightening effects.

A next-generation multi-functional skin booster combining highly effective ingredients for total anti-aging, whitening, and hydration, designed to leave no residues in the body with FDA proven safety.

• Brightening & Clarity: Reduction of hyperpigmentation, dark spots, and patches.
• Anti-Aging: Reduction of fine wrinkles, smoothing of skin texture, and stimulation of collagen.
• Hydration & Firmness: Volume replenishment and improvement in elasticity.
• Healing & Calm: Reduction of inflammation, calming of redness, and under-eye rejuvenation.

Cycle: 2-3 treatments at 1-month intervals.
Duration: Skin improvement and volume restoration effects are long-lasting, maintaining for 4 to 8 months.

Typically 24-36 months from the manufacturing date (unopened). Use immediately after mixing with saline. Discard any remaining solution after opening (single-use vial).

• Side Effects: Mild swelling, bruising, redness, and tenderness at the injection sites.
• Post-Care: Apply sunscreen regularly. Avoid heavy makeup immediately after the procedure, and refrain from exposure to extreme heat (saunas) or strenuous exercise during the initial recovery period.

It is a next-generation multi-functional skin booster for total anti-aging, brightening (reducing hyperpigmentation and dark spots), hydration, firmness, and skin healing.

HA (H-HA & L-HA, 192.00mg), Sodium Succinate (96.00mg), PDRN & PN (5.00mg), NAD+, and Glutathione & Tranexamic Acid for brightening.

Reconstitute by injecting 1mL of normal saline into the vial and shaking well before use. A cycle of 2-3 treatments at 1-month intervals gives effects lasting 4 to 8 months.

Strictly for professional medical use; deep dermis injections must only be performed by professionals and must not be intravascular.

It is manufactured by Healink Korea.

Juveheal W utilizes ICT (Intracellular Transduction) Technology to deliver whitening agents deeply. Niacinamide and Arbutin work synergistically to inhibit melanin production and treat pigmentation, while fermented extracts and Rice Bran Water reinforce the barrier and brighten overall skin tone.

• Whitening & Tone-Up: Improves dark skin tone and restores a bright complexion.
• Pigmentation Treatment: Helps control melanin to prevent and treat dark spots and melasma.
• Sebum Control: Regulates excessive oil production.
• Barrier Reinforcement: Strengthens skin immunity against external irritants.

Full face, specifically for hyperpigmentation, uneven skin tone, and dullness.

Remove the plastic flip-off cap and aluminum seal; apply using a dropper or syringe.

Avoid direct sunlight (Crucial for whitening products).

• Mild irritation or redness may occur, particularly if used with microneedling.

• Strict sun protection (Sunscreen) is required after treatment to prevent repigmentation.

What is Juveheal W used for?

Juveheal W is a whitening and tone-up ampoule. It improves dark and uneven skin tone, helps treat dark spots and melasma by controlling melanin, regulates sebum, and reinforces the skin barrier.

What are the key ingredients?

The primary active ingredients are Niacinamide 2.0% (a K-FDA functional ingredient) and Arbutin, supported by Lactobacillus/Soybean Ferment Extract, Morus Alba Bark Extract, and Rice Bran Water.

How is it applied?

It is applied topically and can be used with MTS (Microneedling), Derma Pen, or Derma Stamp to improve absorption, typically 1 session per week or daily as a topical serum.

Who should administer Juveheal W?

Juveheal W is for external use only. When combined with microneedling devices such as MTS, Derma Pen, or Derma Stamp, it should be used as a professional practice under professional guidance.

Who manufactures Juveheal W?

Juveheal W is manufactured by J MEDICAL Inter Co., Ltd.

• PLLA (Poly-L-Lactic Acid): Derived from Alpha Hydroxy Acid, specifically sourced from plant-based materials like corn and sugarcane.
• CMC (Carboxymethylcellulose): Provides immediate volume upon injection.

Dual-Action Formula: CMC provides instant volume and smoothing upon injection. Over time, PLLA gradually breaks down to stimulate natural collagen regeneration (neocollagenesis). PLLA is completely metabolized by the body into carbon dioxide, water, and simple sugars, leaving no residue behind.

• Immediate plumping and smoothing of the skin via CMC.
• Long-term skin rejuvenation and progressive collagen regeneration via PLLA.
• Restoration of facial and body structure with improved skin elasticity and firmness.

Immediate visible volume from CMC. Natural collagen generation develops over several months, with results lasting up to 2 years.

Typically 24-36 months from the manufacturing date. Single-use vial only; discard any remaining product immediately after use.

• Avoid using the sauna, swimming pool, or gym for at least 7 days after treatment.
• Avoid vigorous facial treatments or massages for 2 weeks post-injection (except for the prescribed 5-5-5 gentle massage).
• Maintain a healthy lifestyle to support optimal collagen production.

It is a collagen biostimulator for immediate plumping and long-term skin rejuvenation, restoring facial and body structure with improved elasticity and firmness.

PLLA (Poly-L-Lactic Acid), a plant-based collagen stimulator sourced from corn and sugarcane, combined with CMC (Carboxymethylcellulose) for immediate volume.

Rejuva Lume is a lyophilized powder and must be reconstituted before use: add Sterile Water for Injection and agitate until a uniform, lump-free suspension forms, following the dilution volume and hydration time in the manufacturer's Instructions for Use.

There is immediate visible volume from CMC, while natural collagen generation develops over several months, with results lasting up to 2 years.

Strictly for professional medical use, injected subcutaneously or into the deep dermis with an 18G cannula or 25-27G needle; do not inject intravascularly.

It is manufactured by Phace Global Co., Ltd.

• PLLA (Poly-L-lactic acid): 200mg. Acts as a bio-stimulator triggering fibroblast activity for long-lasting neocollagenesis.
• H-HA (High-molecular-weight HA): 30mg.
• L-HA (Low-molecular-weight HA): 30mg. Provides immediate hydration and acts as a carrier/suspension agent for PLLA.

Microporous Sphere Technology: Utilizes spherical PLLA particles with internal pores, maximizing the surface area for higher collagen/elastin production and allowing for smoother, less painful injections. CMC & Mannitol Free: Uses HA instead for suspension, adding hydration benefits.

• Dual Volumization: Immediate volumizing effect from HA, followed by sustained neocollagenesis from PLLA.
• Collagenesis: Active stimulation and generation of collagen and elastin under the skin.
• Wrinkle Reduction: Effectively reduces fine lines and deep wrinkles.
• Skin Improvement: Enhances skin hydration, elasticity, compliance, and smooths overall texture.

Standard Cycle: 2 to 3 sessions at 1-month intervals.
Duration: Long-lasting PLLA effects maintained for up to 24 months.

To prevent the formation of subcutaneous nodules (granulomas), practitioners strictly recommend the "5-5-5 Rule" for patients: Massage the treated area for 5 minutes, 5 times a day, for 5 days post-treatment to ensure even particle distribution.

The formula provides anti-apoptosis, anti-melanogenesis, anti-osteonecrosis, wound healing, anti-inflammation, tissue damage prevention, and bone regeneration effects. It utilizes DNA-based ingredients to reconstruct the dermal matrix and repair damaged cells. The released PN significantly stimulates the migration of human dermal fibroblasts, which plays a crucial role in tissue wound repair.

Addresses the root causes of aging by promoting skin regeneration and increasing dermal density, ultimately boosting collagen production.

• Improves overall skin tone, leaving it visibly brighter and smoother.
• Deeply moisturizes the skin with nourishing ingredients to maintain optimal hydration levels.
• Minimizes the appearance of pores by enhancing skin elasticity and hydration.
• Reduces roughness and pore volume while improving fine wrinkles and overall skin texture.

Specifically designed to target fine lines and loss of elasticity around the eyes.

Standard PN eye boosters generally recommend 3–4 sessions at 2–4 week intervals.

Store in a cool, dry place away from direct sunlight. Intended for single-use only; safely discard the syringe after application.

Injection site reactions such as mild swelling, redness, bruising, and temporary "embossing" (small bumps) around the delicate eye area.

• Apply broad-spectrum sunscreen.
• Avoid direct UV exposure, saunas, hot tubs, and strenuous physical activities for a few days post-treatment.

A Dual-Action system where HA provides immediate deep hydration and plumping, while PDRN enhances cellular regeneration, DNA synthesis, and tissue repair (anti-inflammatory).

• Deep Hydration & Glow: Instantly hydrated skin with a natural radiant glow.
• Skin Regeneration: Repairs damaged skin barrier and improves overall skin health.
• Texture & Pores: Smoothes skin texture and tightens enlarged pores.
• Anti-Aging: Improves elasticity and firmness while softening fine lines.
• Tone Correction: Brighter, more even skin tone with reduced redness.

Single-use vials. Discard any remaining solution immediately after opening.

Mild swelling, redness, or papules (bumps) at injection sites are common and typically resolve within 24–48 hours.

It is a skin booster for deep hydration, skin regeneration, texture and pore improvement, and anti-aging on the full face, especially dry, dull, or sensitive skin.

PDRN 2% (Salmon DNA) and non-crosslinked Hyaluronic Acid 17mg/mL, working as a dual-action system for hydration and cellular repair.

Instant glow after Session 1, visible pore tightening and elasticity boost by Session 3, and full rejuvenation effects by Session 5 (5 sessions, 2 weeks apart).

For external/professional use only, applied via papule injection or microneedling (MTS) by a qualified practitioner.

It is manufactured by Phace Global Co., Ltd.

• PDRN (Sodium DNA): Extracted from salmon sperm. Highly compatible with human DNA for cell regeneration.
• Human Adipose-derived Stem Cell Extract: Contains nutrients and growth factors (EGF, FGF, HGF) to produce collagen.
• Hyaluronic Acid: Provides deep moisturization.

Functions as a "New Cell Repairing Factor." The ingredients optimize fibroblastic functions in the dermis, creating an ideal ecosystem to boost core cellular functions and activate tissue regeneration.

• Hydration: +132% improvement in moisture levels.
• Skin Elasticity: +103% improvement in firmness.
• Wrinkle Reduction: +72% reduction in wrinkles and fine lines.
• Tone & Texture: Enhances oil/water balance, softens skin, and provides a whitening effect.

1 Session = 5 Procedures over 3 months.
1st to 3rd Procedure: Spaced 1–2 weeks apart.
4th and 5th Procedure: Spaced 1 month apart (for maintenance).

Discard any remaining product within 7 days after opening due to the lack of preservatives. Keep away from direct sunlight.

• Mild redness, swelling, or pinpoint bleeding temporarily associated with the MTS/injection method. (PDRN is highly compatible with human DNA, minimizing immunological side effects).
• Apply soothing masks or regenerative creams post-procedure.
• Strict sun protection is required to prevent pigmentation during the healing phase.

It is a skin booster for total anti-aging and regeneration, improving hydration, elasticity, wrinkles, and tone on dull, sagging, and wrinkled facial skin.

PDRN (Sodium DNA from salmon sperm), Human Adipose-derived Stem Cell Extract with growth factors, and Hyaluronic Acid, within a composite of 43 active ingredients.

One session is 5 procedures over 3 months: the 1st to 3rd spaced 1–2 weeks apart, and the 4th and 5th spaced 1 month apart for maintenance.

For professional use only, applied via Mesotherapy injection or MTS under strict aseptic conditions since the formula is preservative-free.

High-purity HA attracts water molecules to the dermis, restoring moisture balance immediately while stimulating fibroblasts to promote endogenous collagen synthesis.

• Intensive Moisturizing: Restores dry and dehydrated skin (Hydro-lifting).
• Skin Rejuvenation: Improves overall skin radiance and brightness (Glow effect).
• Texture Improvement: Tightens pores and smoothes fine lines/wrinkles.
• Elasticity Restoration: Enhances skin firmness through collagen stimulation.

Supplied as ready-to-use pre-filled syringes. No mixing required.

Store away from direct sunlight. Do not freeze. Do not use if the package is damaged.

• Mild redness (erythema) or swelling
• Bruising or tenderness at the injection site
• Symptoms usually resolve within 1–3 days

• Avoid heavy makeup for at least 24 hours.
• Avoid saunas, steam rooms, and excessive heat for 1 week.
• Apply sunscreen diligently.

It is used for intensive moisturizing (hydro-lifting), skin rejuvenation and radiance, texture improvement with pore tightening and fine-line smoothing, and elasticity restoration through collagen stimulation.

Its primary active ingredient is Hyaluronic Acid (HA) 15mg/mL (1.5%), buffered with Phosphate Buffered Saline (PBS) pH 7.0.

Visible improvement appears in 1–2 weeks and effects last 3–6 months. A course of 3–4 sessions at 2–3 week intervals is recommended.

It is a medical device for use by licensed practitioners only and should be administered by a qualified professional.

REGENOVUE Aqua Shine is manufactured by NeoGenesis Co., Ltd.

NAD+ is a vital coenzyme present in all living cells, crucial for mitochondrial function and ATP (energy) production. Applied to the skin, it facilitates cellular energy metabolism, promotes DNA repair, delays cellular senescence, and activates fibroblasts. This molecular-level rejuvenation helps restore the structural integrity of the dermis.

• Deep cellular regeneration.
• Powerful anti-aging and wrinkle reduction.
• Improvement of skin elasticity.
• Restoration of skin vitality and radiance.
• Strengthening of the skin barrier.

Face, neck, décolletage, and the back of the hands (areas primarily showing signs of photoaging and intrinsic aging).

Standard NAD+ skin booster protocols generally recommend 3–5 sessions at 2–4 week intervals.

Store in a cool, dry place away from direct sunlight (typically 1–30°C or refrigerated at 2–8°C, depending on the exact formulation state).

Intended for professional, single-use application. Open vials should be used immediately to prevent oxidation or contamination.

Mild redness (erythema), localized swelling, pinpoint bruising, or tenderness at the injection or microneedling sites.

• Avoid direct sun exposure and apply broad-spectrum sunscreen diligently.
• Refrain from saunas, hot tubs, swimming, and strenuous exercise for at least 48 hours post-treatment.

• H-HA (High molecular weight HA): 67.5mg
• L-HA (Low molecular weight HA): 67.5mg
• PDRN (Polydeoxyribonucleotide): 5mg
• PN (Polynucleotide): 5mg

H-HA & L-HA provide intense moisture, enhance skin elasticity, and maintain long-lasting volume. PDRN & PN promote cell regeneration, offer anti-inflammatory effects, enhance wound healing, and repair broken collagen and elastin fibers.

• Hydration & Volume: Intense moisturizing and long-lasting volume support.
• Rejuvenation: Wrinkle reduction, collagen & elastin regeneration.
• Healing & Tone: Anti-inflammatory wound healing, whitening, and scar/acne improvement.

Cycle: 3 treatments at 2-week intervals.
Onset: Rapid onset with PDRN/PN action visible in 1-2 weeks.
Duration: Overall effect lasts 4 to 8 months.

Single-use vial. Discard any remaining solution after opening.

• Common Effects: Mild swelling, redness, bruising, tenderness, or temporary papules (bumps) at injection sites.
• Post-Care: Avoid heavy makeup for 24 hours. Avoid extreme heat (saunas, hot baths) and strenuous exercise for a few days. Apply sunscreen regularly.

It is a skin booster for deep hydration, skin texture improvement, wrinkle reduction, wound healing, and overall cell regeneration across the full face, neck, and back of hand.

A complex of H-HA and L-HA (67.5mg each) plus PDRN (5mg) and PN (5mg) per 5mL, combining HA hydration with PDRN/PN cell regeneration.

The overall effect lasts 4 to 8 months, with PDRN/PN action visible in 1-2 weeks, following a cycle of 3 treatments at 2-week intervals.

It is strictly for professional medical use and must not be injected intravascularly.

It is manufactured by Healink Korea.

• Barrier Formation: PN forms a physical barrier on the skin to block environmental stressors and maintain optimal moisture levels.
• Fibroblast Activation: Activates fibroblasts to stimulate collagen synthesis, restoring skin structure and elasticity from within.
• Anti-inflammatory Action: Provides anti-inflammatory support to improve the overall skin environment and support tissue recovery.

• Restores oil-water balance and reduces sebum secretion for improved skin texture
• Replenishes elastic fibers including collagen, enhancing the skin's self-healing capacity
• Promotes wound and scar healing
• Effectively improves dryness, pigmentation, wrinkles, and skin sagging

Provides an extended maintenance and retention period attributed to the long DNA chain structure of the PN, which slows degradation and prolongs efficacy in the skin.

PLLA microparticles stimulate the body's natural collagen production (neocollagenesis) by activating fibroblasts. As the PLLA is gradually absorbed and metabolized by the body, the newly formed collagen restores lost facial volume and improves overall skin elasticity.

Composed of a biodegradable and biocompatible synthetic polymer designed to act as a biostimulator rather than a traditional volumizing filler.

• Gradual and natural-looking volume restoration.
• Deep wrinkle correction.
• Long-term collagen regeneration.
• Improvement of overall skin tone and texture.

Facial contouring, deep wrinkles (e.g., nasolabial folds, marionette lines), sunken cheeks, temples, and jawline.

Results appear gradually over 4 to 6 weeks as new collagen is synthesized. The volumizing and rejuvenating effects are long-lasting, typically persisting for 18 to 24 months.

Store in a cool, dry place away from direct sunlight. Once reconstituted, the product should be used within the recommended timeframe according to standard PLLA protocols.

Patients are typically advised to massage the treated area gently for 5 minutes, 5 times a day, for 5 days to ensure even product distribution and prevent the formation of subcutaneous nodules.

Mild swelling, bruising, redness, and tenderness at the injection sites.

It is a PLLA collagen biostimulator for gradual, natural-looking volume restoration, deep wrinkle correction, and long-term collagen regeneration for facial contouring.

Poly-L-Lactic Acid (PLLA), a biodegradable, biocompatible synthetic polymer that stimulates the body's natural collagen production (neocollagenesis).

It requires proper reconstitution with Sterile Water for Injection (SWFI) prior to the procedure to ensure an even suspension of PLLA particles.

Strictly for professional medical use, via deep dermal or subcutaneous injection; do not inject intravascularly or into the superficial epidermis.